Question about GPS

Open Question

How do programme the depth alarm on my raymarine a78 touch screen combo chart fish instrument please?

How do i programme the depth alarm on my raymarine a78 touch screen please?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: rl70c raymarine depth finder problem

fish finder transducer needs to be on before you boot your system. check your hsb cables and termination

Posted on Oct 13, 2008

  • 1 Answer

SOURCE: My Raymarine C80 CHart plotter won't load.

Check to see if this is a power issue by connecting to shore power and fully charging your batteries overnight with instruments off. While still connected to shore power, with batteries fully charged, turn on C80 navigation system. If the loading screen comes on and does not reset, then try holding down the button immediately to the right of the red power button for at least 3 seconds to see if the system re-boots.

Posted on Apr 28, 2010

Testimonial: "Factory reset solved the problem. Soft key next to power button worked a treat!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Raymarine "DSM connection lost"


Murray,

Has the DSM and the E120 software been upgraded to the latest software: 4.12 for the DSM and 5.52 for the E120?

Try this first. You can download the software off Raymarine.com and burn each to a separate compact flash card.

I have seen many problems like you are experiencing solved with this simple change.

If this doesn't solve the problem, the DSM will have to go back to Raymarine for repair.

Apr 19, 2010 | Raymarine Dsm30 Digital Sounder Module

1 Answer

My Raymarine C80 CHart plotter won't load.


Check to see if this is a power issue by connecting to shore power and fully charging your batteries overnight with instruments off. While still connected to shore power, with batteries fully charged, turn on C80 navigation system. If the loading screen comes on and does not reset, then try holding down the button immediately to the right of the red power button for at least 3 seconds to see if the system re-boots.

Apr 13, 2010 | Raymarine C80 GPS Receiver

1 Answer

My furuno depth finder gives me crazy depth readings after i go over 10knots..whats the problem?


Turbulence on the transducer is almost certain. If transom mounted, **** it slightly deeper aft and ensure that the leading edge is not exposed. If through hull, call me 847-746-0100

Nov 03, 2009 | Furuno 1850WF Gps Fish Finder Combo...

1 Answer

How do you activate the fishfinder for the furuno 1650 WF


pressing the "SNDR" button activates the sounder press"ALARM" tyo acces alarm menu, turn them on or off there, look "NEXT PAGE" for alarm 2 847-746-0100

Apr 16, 2009 | Furuno 1850WF Gps Fish Finder Combo...

1 Answer

Sea talk failure


Remove all wiring from 4000 head, hook up only 12V, if seatalk fail continues, it is the head. if seatalk fail goes away, hook in instruments one by one until the bad head is found. Seatalk is 12V red, Ground Screen(bare wire) and Data yellow (pulsing voltage). good luck 847-746-0100 John Barry

Jul 14, 2008 | Raymarine A65 Combo GPS...

3 Answers

RAYMARINE


With the charts page up, start by hitting the find ship softkey at the bottom of the screen.If that find the boat on the chart all is good.If not you need to check you have a GPS fix. Go to GPS screen and see you are seeing satalites.
If all is good when you hit find ship and the boat disappears again from chart while underway you will need to go into the chart setup menu and see if the screen amplifier is turned off. If off turn on.This is first place to start. Hope that helps

Jul 13, 2008 | Raymarine A65 Combo GPS...

1 Answer

Rl70c raymarine depth finder problem


fish finder transducer needs to be on before you boot your system. check your hsb cables and termination

Jul 12, 2008 | Raymarine RL70CRC GPS Receiver

Not finding what you are looking for?
GPS Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPS Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

kakima

Level 3 Expert

102366 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...