Question about Kenwood Dnx-7240, Dnx7240, Dnx-7240bt, Dnx7240bt Audio,video, Sub, Rca Cables

Open Question

Reset Code For Kenwood

Security code set

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Noggin
  • 944 Answers

SOURCE: 4 digit security code reset

Here is the link for the user manual if you need it; http://inform2.kenwoodusa.com/manuals/KDCMP228.pdf Page 5 shows the reset button, page 19 shows all the security code procedures which have to be followed even after a reset. This site has a few partial methods which might be worth trying for your player but unfortunately no complete solution; http://forum.ecoustics.com/bbs/messages/4/312069.html Sorry but I think it has to be a dealer - if it was so easy there would be no point having security codes at all - Kenwood says; "How do I reset my security code? If you do not know the security code for your unit, you will need to take the unit to a Kenwood authorized service center to have it decoded. The code feature can only be activated when the code has been entered twice, so it isn't accidentally activated. The service center will often require you to provide a proof of purchase as this feature is designed for theft prevention and the proof of purchase will ensure you are the rightful owner of the product. You can locate the nearest service center in your area here, or by calling (800) KENWOOD. Though we try to locate service facilities in local areas for our customers, at times consumers may be required to ship their product to the facility for repair. Once you have had your code reset, please make a note of the code and keep it in a safe place away from your vehicle." Hope this helps - sorry if bad news :)

Posted on May 16, 2007

Ad
  • 1 Answer

SOURCE: Kenwood KDC-MP2035 security code

yo tengo un reproductor kenwood kdc-mp2035cr pero este no me reproduce nada solo me sale un mensaje que dice protect y no me deja hacer nada ni colocarle nada por el auxiliar

Posted on Jul 06, 2008

SOURCE: kenwood ddx 8017 security codes

********

Posted on Aug 24, 2008

  • 30 Answers

SOURCE: unlock code for kenwood kdc-mp235

This Ebay auction 170150626863 rtcurve.gif s.gif will remove the code for 40.00 including shipping, or you can contact Kenwood at 1-800-KENWOOD (536-9663).
Good Luck.
Leadispenser

Posted on Aug 27, 2008

shagone
  • 34 Answers

SOURCE: UNLOCK SECURITY CODE

for your kdc-mp528 will work whith code KCAR entered from the remote

Common Kenwood Security Codes
Many Kenwood radios are configured with the same security codes:

KCAR - This seems to be a "backdoor" to some Kenwood models.
3051 - This is the security code which is printed in the manual of many Kenwood models.
1234 - This is a security code commonly chosen by Kenwood owners.
Entering Your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
Enter the security code using your Kenwood remote.
Type 2
Press and hold the "Auto" button and "Track up" (next track button on the right) on the face of radio at the same time until the four dash lines disappear.
Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.

To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.

Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.

The key sequence to enter the security code KCAR is:

5
5
Track Up
2
2
2
Track Up
2
Track Up
7
7
Track Up
Your Kenwood should then enter tuner mode.

A Security Code Bug in some Kenwoods
There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

i hope this works for you.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a kenwood car stereo at the flea market and when i got home i found out that it has a lock code,is there any way to reset it without the remote control or shipping it to kenwood? it kdc mp628


you have a problem
one is able to set security code without the remote
without the security code ..not a chance to over ride it
a unit reset wont change the security code

check the user manual link
Kenwood KDC MP628 Manuals
options

back to the flea market see if the seller is there.. for a refund
or contact that flea markets organizers to track down the stall operators details

you can try and contact kenwood car stereo company direct
in your part of the world

this is USAs other countries have their sites
http://locator.kenwood.com/

if you have the gift or sweet talking
they may give you an authorized kenwood repairer to take the stereo to ...and get the code number for you

26310612-05xlcb20kmvnuzruvlterhkb-3-1.jpg

Oct 14, 2016 | Kenwood KDC-MP628 CD Player

1 Answer

I need your help to know the code its No 11201951


Here is some good info from another site (as linked below):http://www.tech-faq.com/how-to-reset-a-kenwood-security-code.html


If these methods don't work you would have to send the stereo back to Kenwood to be reset.

Common Kenwood Security Codes Many Kenwood radios are configured with the same security codes:
  • KCAR - This seems to be a "backdoor" to some Kenwood models.
  • 3051 - This is the security code which is printed in the manual of many Kenwood models.
  • 1234 - This is a security code commonly chosen by Kenwood owners.
kenwood-security-code.jpg Entering your Kenwood Security Code If the car battery fails or is disconnected, the Kenwood will ask for the security code.
The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:
Type 1
  • During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
  • Enter the security code using your Kenwood remote.
Type 2
  • Press the "Auto" button and "Track up" on the face of radio at the same time until the four dash lines disappear.
  • Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
  • Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
  • Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter - then press the Track Up or Next Track key to send the letter.
To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.
Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.
The key sequence to enter the security code KCAR is:
  • 5
  • 5
  • Track Up
  • 2
  • 2
  • 2
  • Track Up
  • 2
  • Track Up
  • 7
  • 7
  • Track Up
Your Kenwood should then enter tuner mode.
A Security Code Bug in Some Kenwoods There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.
In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

Jul 01, 2011 | Kenwood DPX-6020 CD / Cassette Player

1 Answer

My system is blocked on secuirity code enter when i switch it on and i don't have the code. My car stereo is a Kenwood KDC-MP638U. happened when i removed it from one car to another car. have tried using...


Many Kenwood radios are configured with the same security codes:

  • KCAR - This seems to be a "backdoor" to some Kenwood models.
  • 3051 - This is the security code which is printed in the manual of many Kenwood models.
  • 1234 - This is a security code commonly chosen by Kenwood owners.
A Security Code Bug in Some Kenwoods

There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.
Finding the Kenwood Security Code

There are backdoor codes for each Kenwood car stereo, based upon the model and the serial numbers.

These backdoor codes are closely held secrets. Outfits like Car Audio Accessories UK will sell you the code for your radio for £20.
Sending your RadioBack to Kenwood

If all else fails, you can send your stereo back to Kenwood to have the security code reset.

Dec 15, 2010 | Kenwood KDC-MP638U Car CD/ MP3 Player

1 Answer

I forgotted the code how can I reset the stereo


Many Kenwood radios are configured with the same security codes:
* KCAR - This seems to be a "backdoor" to some Kenwood models.
* 3051 - This is the security code which is printed in the manual of many Kenwood models.
* 1234 - This is a security code commonly chosen by Kenwood owners.

Entering your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.
The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:
Type 1
* During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
* Enter the security code using your Kenwood remote.
Type 2
* Press the "Auto" button and "Track up" on the face of radio at the same time until the four dash lines disappear.
* Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
* Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
* Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.
To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.
Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.
The key sequence to enter the security code KCAR is:
* 5
* 5
* Track Up
* 2
* 2
* 2
* Track Up
* 2
* Track Up
* 7
* 7
* Track Up
Your Kenwood should then enter tuner mode.

Newer Kenwood models have the security information stored in non magnetic flash memory.
Once the code is set, it cannot be retrieved by a "backdoor method".
Proof of ownership is required. You can take the radio in to any AUTHORIZED Kenwood retailer - and in 10 minutes - they can have your radio reset for you.
If all else fails, you can send your stereo back to Kenwood to have the security code reset. They require proof of purchase.

This can be a receipt, or a used car invoice.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 30, 2010 | Kenwood KDC-MP4028 CD Player

1 Answer

Cannot remember my security code after reset Kenwood kdc-mp435u


Try code KCAR entered from the remote. 3 entry methods are detailed below.

Common Kenwood Security Codes
Many Kenwood radios are configured with the same security codes:

KCAR - This seems to be a "backdoor" to some Kenwood models.
3051 - This is the security code which is printed in the manual of many Kenwood models.
1234 - This is a security code commonly chosen by Kenwood owners.
Entering Your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
Enter the security code using your Kenwood remote.
Type 2
Press and hold the "Auto" button and "Track up" (next track button on the right) on the face of radio at the same time until the four dash lines disappear.
Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.

To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.

Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.

The key sequence to enter the security code KCAR is:

5
5
Track Up
2
2
2
Track Up
2
Track Up
7
7
Track Up
Your Kenwood should then enter tuner mode.

A Security Code Bug in some Kenwoods
There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

i hope this works for you.

Jan 09, 2009 | Kenwood KDC-MP435U CD Player

1 Answer

Security code for kenwood kdcmp528


for your kdc-mp332 type 2 below will work whith code KCAR entered from the remote

Common Kenwood Security Codes
Many Kenwood radios are configured with the same security codes:

KCAR - This seems to be a "backdoor" to some Kenwood models.
3051 - This is the security code which is printed in the manual of many Kenwood models.
1234 - This is a security code commonly chosen by Kenwood owners.
Entering Your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
Enter the security code using your Kenwood remote.
Type 2
Press and hold the "Auto" button and "Track up" (next track button on the right) on the face of radio at the same time until the four dash lines disappear.
Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.

To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.

Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.

The key sequence to enter the security code KCAR is:

5
5
Track Up
2
2
2
Track Up
2
Track Up
7
7
Track Up
Your Kenwood should then enter tuner mode.

A Security Code Bug in some Kenwoods
There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

i hope this works for you.

Oct 31, 2008 | Kenwood KDC-MP528 CD Player

1 Answer

Kenwood KDCMP528


for your kdc-mp528 type 2 below will work whith code KCAR entered from the remote

Common Kenwood Security Codes
Many Kenwood radios are configured with the same security codes:

KCAR - This seems to be a "backdoor" to some Kenwood models.
3051 - This is the security code which is printed in the manual of many Kenwood models.
1234 - This is a security code commonly chosen by Kenwood owners.
Entering Your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
Enter the security code using your Kenwood remote.
Type 2
Press and hold the "Auto" button and "Track up" (next track button on the right) on the face of radio at the same time until the four dash lines disappear.
Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.

To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.

Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.

The key sequence to enter the security code KCAR is:

5
5
Track Up
2
2
2
Track Up
2
Track Up
7
7
Track Up
Your Kenwood should then enter tuner mode.

A Security Code Bug in some Kenwoods
There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

i hope this works for you.

Oct 29, 2008 | Kenwood KDC-MP528 CD Player

Not finding what you are looking for?
Kenwood Dnx-7240, Dnx7240, Dnx-7240bt, Dnx7240bt Audio,video, Sub, Rca Cables Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Video Cameras Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Are you a Kenwood Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...