Question about Konica Minolta bizhub C250 All-In-One Laser Printer

Open Question

MY KONICA MINOLTA BIZHUB 165 IS SHOWING CODE C2558

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: konica minolta bizhub 350

• The Fusing Roller Sub Thermistor does not
detect the required temperature within 30 sec.
after a warm-up cycle has begun; therefore, the
copier does not complete the warm-up cycle.
• The temperature of the Fusing Rollers does not
reach the required level even after the set period
of time has elapsed during a warm-up cycle.
1
Check that the H1[ fuser lamp] comes on when the Main Power
Switch is set to ON, and correct or replace as necessary.
- -
2
Check that the H2 comes on when the Main Power
Switch is set to ON, and correct or replace as necessary.
- -
3
Check the installation of the TH1 and the TH2, and
correct or clean as necessary.
- -
4
Check the operation of the TH1.
Remove CN80 (4P), and then check that the resistance
across CN80-2 and -3 on the Thermistor is
infinity.
- -
5
Check the operation of the TH2.
Remove CN81 (4P), and then check that the resistance
across CN81-2 and -3 on the Thermistor is
infinity.
- -
6
Check the continuity of the H1.
Correct or replace as necessary.
- -
7
Check the continuity of the H2.
Correct or replace as necessary.
- -
8 Change PU1 - -
9 Change PWB-A

Posted on Nov 19, 2007

Ad
Nitrotrike
  • 589 Answers

SOURCE: copier malfunction

Code C0F36 is a low toner density error on the black developing unit.

Was it asking for black toner before this code appeared?

Posted on Feb 10, 2008

  • 19 Answers

SOURCE: bizhub 350 error code

c3852 means low fuser(hot section) temp setting. hold down utility or stop key, then you should be abel to do trouble reset. if problem persist it would most likely be a lamp or a sensor, which will require a technician to come out.

Posted on Apr 16, 2008

xeerie
  • 347 Answers

SOURCE: desbloqueo del codigo m2 en konica minolta bizhub 163

Este código significa que la vida las partes de su desarrollo + unidad de imagen se ha caducado. Ahora es el momento de reemplazar las partes.

Posted on Jun 19, 2010

hamzaskilltd
  • 316 Answers

SOURCE: Solution for error code c2557 konica minolta bizhub 250 machine

ADTC sensor failure

Posted on Aug 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Bizhub c224e error code 2558


Konica-Minolta bizhub C224e Code: C2558

Description

Abnormally high toner density detected black TCR sensor
The TC ratio of the toner determined by the toner replenishment control is detected to be the predetermined value or over for consecutive times.

Remedy

1 Reinstall developing unit. 2 Reinstall toner cartridge. 3 Check the connector between developing unit-FRB CN13, CN14, CN15, CN16, CN10 for proper connection and correct as necessary. 4 Check the connector between FRB CN1, CN3-PRCB CN7, CN9 for proper connection and correct as necessary. 5 Replace the developing unit. 6 Replace FRB. 7 Replace PRCB.

http://www.printcopy.info/?l=en&mod=erc&brand=Konica-Minolta&model=bizhub%20C224e&code=C2558

Aug 22, 2016 | Konica Minolta bizhub Office Equipment &...

3 Answers

Konica minolta bizhub 215 giving error c2558


C2558
Abnormally high toner density detected TCR sensor board
- The T/C ratios detected by the TCR sensor board (TCRSB) are above the threshold for the detection of abnormally high T/C ratio for three successive times.
- The connector between MFPB to TCRSB is disconnected.

Error Codes Konica Minolta bizhub 215

Mar 07, 2015 | Konica Minolta Office Equipment & Supplies

2 Answers

Proceed to continue using the machine konica minolta bizhub 165 when I get the message error M2


http://www.copytechnet.com/forums/konica-minolta/62595-konika-minolta-bizhub-163-error-code-m2.html

Sep 21, 2014 | Konica Minolta bizhub Office Equipment &...

1 Answer

Bizhub 184 164


Replace the developer in order to get rid of this problem!

Mar 12, 2014 | Office Equipment & Supplies

1 Answer

Error code c2558 in konica Minolta bizhub 164


help me my konico minolta bizhub 184/164 error (C2558) my mail id ganaa_et24@yahoo.com

Sep 30, 2013 | Office Equipment & Supplies

1 Answer

Konical minolta bizhub 164 mahine service call c2558


machine trouble sevice call [c2558] wat a problam in konica minolta bizhub 164 printer

Jun 02, 2012 | Konica Minolta bizhub C250 All-In-One...

2 Answers

There is an error code c-2558 showing on my machine konica minolta bizhub c452 please do let me know the proper remedy for it ASAP


Abnormally high toner density detected Black TRC sensor-

1. Correct the TRC Connection on the underside of the imaging unit if faulty
2. Reinstall black image unit
3. Change image unit
4. Change PWB-M
5. Change PWB-MFP

you can try # 2 then run 20-30 sky shops (copies with lid up to make black copies) put a white piece of paper over lead edge section of copy glass so you are only making 1/2 black copies if you don't the copy may jam in the fuser due to excess toner. after running copies turn machine off for 10 secs to reset and power backon. if problem continues I would change the image unit.

Aug 21, 2011 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Trouble code C2558


Hi rosemarie860,

C2558 on a Konica Minolta C250 means the machine is detecting an unusually high toner level in the
Black Imaging Unit. I suggest you take the Black Imaging Unit out, give it a gentle shake and pop it back in.
This usually does the trick, although sometimes only for a short period Other than that, you you might be
looking at replacing Black Unit.

Regards

m-press.biz

Feb 21, 2011 | Konica Minolta bizhub C250 All-In-One...

5 Answers

How do I clear error message C-2558 for the Konica Minolta bizhub C253


tis error means abnormal tonder density in the balck image unit take the blacke image unit out and shake it while holding it level and put it back in the machine to reset the error code leave the machine on and open then close the front door

Nov 12, 2009 | Konica Minolta bizhub C250 All-In-One...

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...