I do not know the settings

Click the "Start" button, then choose "Control Panel," "Network and Internet" then finally "Setup a Bluetooth enabled device."

Power on the Bluetooth Hardware you want to connect to the computer. You must have some sort of hardware to connect to the computer, in order to enable the Bluetooth connection.

Click "Add" and the computer searches for any Bluetooth hardware in the area. Once it detects the hardware, select it and click "Next."

Type in the passkey for the Bluetooth hardware (found in the device's user manual) and click "Next."

Install any drivers now that came with the Bluetooth hardware. (Insert the driver installation CD that comes with the Bluetooth hardware, wait for the the installation wizard to load onto the screen, accept the license agreement, then click "Next" for the installation name and location and select "Install" to install the drivers.)
Choose "Locate and install driver software" if there are provided drivers. If not, click "Don't show this message again for this device" and click "OK."

hope this helps

Hi Jack, thanks for contacting me to help you. Well, I have few questions since you didn't specify anything in detail; What is the operating system installed on your computer? e.g. Windows xp or Windows vista or Windows 7.... What antivirus program is installed on your computer?
Still have questions, but let's proceed anyway. I don't think this it will be a good idea to set up remote connection and most of all, it looks like we are in different time zones (I am in India).
Please follow the instructions given below:
Hardware; For hardware issues, please try to install another mouse on the same system and check whether the same problem persists or not.
If your mouse has a driver, please uninstall and reinstall it.
I would also suggest you to place the mouse on different mouse pads, never place on table or on a plastic type surface. This is to verify that there's no hardware issues.
Software/Virus;It would be a pleasure if you could let me know when and how it happened. In most cases, it hardware issue, but in rare cases, viruses cause this problem. Make sure to scan your computer using different types of antiviruses. But remember not to install multiple antivirus programs at a time. If you've finished scanning with Avira and the problem persists, then uninstall it and then again download and install Avast. Download Links are given below. Malwarebytes is also a recommended program for the same problem. I hope you can still install programs or run .exe files.
I would suggest you to scan your whole drives/computer in Safe Mode. With Avast you can even Scan in Boot Mode means during startup...
The following are the download Links..
Avira FREE
Avast FREE
Malwarebytes FREE

Good Luck.
Let me know if you need further help..
Note: All Programs I've mentioned are Free Versions and of course approved softwares, once installed, don't forget to update before running the scans.
Thanks for using FixYa.
Regards,Nonontech.

Log on tothe official WEBSITE of the printer manufacturer. Search using the link for SUPPORT CENTER for the drivers to the model. You can download and run.Also first of all remove your printer from the PC and uninstall the printer software if any was installed. Now reinstall the printer software and then connect the Printer ONLY WHEN PROMPTED, to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken.

you can download your ATI graphics card software from the internet from the manufacture of your graphics card.don`t forget to download its serial key. or you can buy from a hardware shop.

You don't need any driver software, if your pc has windows xp sp2 or later and Windows Media Player 11.
If you have problem with your device follow this steps:
1. Connect the player to the computer.
2. From the computer, select start - Control Panel - Performance and Maintenance - System. "System Properties" is displayed.
3. Select Hardware tab, and open Device manager.
4. Open Universal Serial Bus controllers, and select USB Mass Storage Device or WALKMAN NWZ-XXXXX.
5. Select Action - Update Driver ... from the menu bar. "Welcome to the Hardware Update Wizard" is displayed.
6. A dialog on Windows Update connection will be displayed. Select No, not this time., followed by Next.
7. Select Install from a list or specific location [Advanced], followed by Next for the hardware install method.
8. Select Don't search. I will choose the driver to install., followed by Next for the search and install option.
9. Check Show compatible hardware, and then select MTP Device* in the model list, followed by Next. The device driver is installed.
10. "Completing the Hardware Update Wizard" message is displayed, and confirm "MTP Device" message. Click Finish.

Good luck!
Thanks.
gylacz

1st You download Webcam Driver.
install the Logitech Quickcam 9.0.2
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

I am glad to HELP YOU!

From the very beginning you have to know that you are NOT THE ONLY ONE experiencing such problems...!
There are TWO WAYS to fix the problem:
#1. download and install [it's FREE and works GREAT!] the DEBUT software from HERE. But before you will install DEBUT just un-install the ORBICAM software. Use the integrated Windows UNINSTALLER to take care of the job.
You will see that this DEBUT will perform a BETTER JOB than ACER ORBICAM software.
or
#2.
a. identify what kind of webcam device you have on your machine;
b. get the hardware id of the webcam [right-click on MY COMPUTER > HARDWARE > DEVICE MANAGER]
c. get the serial number of your machine/laptop
d. send all those information to the LSC [Local Support Centre]; they have to help you with a certain procedure to fix the error.

Choose one or another - it's up to you!

GOOD LUCK!
... and don't forget to RATE, please...

Oh, where do I start...

There are several different reasons why you might be getting this. They may be due to software misconfiguration or hardware malfunction.

On the software side, if this is application specific problem, then uninstall and don;t use the application that's causing it. Or troubleshoot further with instructions below.

if the problem appears randomly, for example, then first thing you need to do is make sure you have good and clean install of Windows running. Incorrect Windows configuration *could* (although in theory it shouldn't) lead to this problem. So if computer worked all right for a long time then this is a good candidate for the problem - software mess-up.

How do you know?
Well frankly, it's hard. I used to have a separate HDD where I'd install Windows...if an installation passess successfuly you can be mostly sure it was software messup that caused the problem. If not - it's hardware.

On the hardware side, the most likely reason is bad or incompatible RAM memory installed. If you have recently installed more memory this will be your answer - take it out.

if you haven't, try taking out some memory (usually there are a few slots installed) and booting again.

You can start resolving the problem on the software end or the hardware end - each has its benefits and drawbacks.

Hello, kindly get it here : www.softwarepatch.com/utilities/sony-digital.html www.driverskit.com/freedownload/Camera/Sony/Digital_Camera.../18763.html www.sony.co.id/section/downloads
Jay,Gint

i have a samsung U700.. I have downloaded many versions of bitpim but not even one has got games under media!!!!!!!
plzzzzzzzzzzzzzz help me out. really want to put games on my phone! thx