Rca projection tv will not turn on

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/

I had a 56 toshiba do that and it was the light bulb inside. It wasn't difficult to replace.

Resolders the 2 convergence ICS and all it resitsors.Well get convergence back to normal.Not than the 2 convergence ICS must replaced.Try Website Tv Repair World.com for a convergence kit to repair it ur self,if u Know how to solders?

55" rca projection tv turns on has sound but no picture

try Encompass Parts 1-800-638-3328

RCA Projection tvs are trash,should be off the market.

What is your Chassis# and what year is TV??

i have the same problem

1) Reset will not help

2) Older RCA projection tv's usually produce a good pix,
so you could fix it....

3) light box chassis pulls out to go to shop for repair...

4) For more info = provide service # and chassis # off back..

Please rate this solution...............

Dir TV projection Techcions, I own RCA Model:P52937 Chassis No.PTK195M26B. After a big flood here in Chicago, my basement got flooded and my projection TV was in water up to 1 foot. Befor I turned it on, I dreid it out perfectly, then, I turned it on, and a couple components from the power supply got burned up to the point where I am not able to read the part numbers that are on it. I was wondering if you have this kind of chassis and model service manual for this projection TV, or conponet part number i location 101 on mother boatd power supply. Thank you in advance, Darius If you prefeer, you may call my cell phone: 773-875-3926