Question about Juki 22-Stitch Compact Sewing Machine

Open Question

Juki TL98e Reverse lever stuck

Reverse lever is stuck down.

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Where do I oil?

I found my manual and oiled my machine. Then I found the solution to the thread breaking (online) - I just needed to drop my feeder! Thanks anyway. Alma

Posted on May 08, 2009

Herabird
  • 15 Answers

SOURCE: juki tl98e electrical schematic

Juki does have a free service manual on their web site; it may have a schematic in it.

Posted on May 29, 2010

SOURCE: I need User Manual for Juki TL98E

hi there
i had JUKI TL98Q if same email me i can send to you service manual by mail
best regards
ashraf abozid
aabozid@hotmail.com

Posted on Oct 08, 2010

SOURCE: the reverse lever on my juki ddl-8300n is moving up and down when sewing. this has not been occuring for the first year of use. any suggestions?

contact a juki dealer & ask them about the lever

Posted on Feb 05, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Juki TL98E and when I got it forgot to put the presser foot down and obviously the needle broke several times. Now the thread keeps breaking. Thoughts?


Remove all the thread from the machine. Thoroughly check that there are no stray threads or lint stuck anywhere. Oil your machine per the instructions.

Make sure you are using a brand new needle.

ALWAYS RAISE the presser foot and rethread the machine. Verify the thread path is correct. Check that the bobbin is installed and threaded correctly.

Set the tension to the midway point. Pull the bobbin thread to the top of the fabric. Gently hold the thread tails while you take a couple of slow stitches.

If it is still not sewing correctly, it's quite possible the timing is off (which is common when a needle breaks). You'll probably need to take it for service.

...

Oct 27, 2016 | Juki Sewing Machines

1 Answer

Juki will not go in revers when finger button is pushed. Replaced switch already. still will not go in revers


http://www.singernj.com/shop/Juki-DDL-8300.html
If this is the machine you have, that BIG horizontal lever on the right is the reverse lever. You must have some sort of electronic reverse mechanism that is externally mounted. You need to post info on that mechanism.

Apr 28, 2011 | Juki DDL-8300

1 Answer

I am having problems with my Juki TL98E skipping stitches when I free-motion quilt. I have cleaned it well, put in a new needle but still having problems. When I stitch forward, it's ok, but when I try to...


It is a timing issue. I have a TL98E. The needle bends a bit when free motion quilting, moving the needle away from the hook, thus missing the thread. Try to put in a larger needle, or have the timing changed so that the hook "kisses" the size needle that you want to use. Tammy

Nov 18, 2010 | Juki TL-98Q

1 Answer

I need User Manual for Juki TL98E


hi there
i had JUKI TL98Q if same email me i can send to you service manual by mail
best regards
ashraf abozid
aabozid@hotmail.com

Aug 17, 2010 | Juki Sewing Machines

1 Answer

Juki tl98e electrical schematic


Juki does have a free service manual on their web site; it may have a schematic in it.

May 12, 2010 | Juki TL-98Q

1 Answer

I have a Juki tl98e it often has a problem with the bobbin not sewing on the bottom of the quilt. Especially when you first start quilting. Stopping and starting. I do not have a manual for this machine....


A manual is the best 'tool' you can get for your sewing machine. The manual will explain how to thread the machine, how the machine works, what the different buttons and levers are for, how to maintain it, etc. Before you do anything else, get a manual :)

Apr 20, 2010 | Juki Sewing Machines

1 Answer

BOBBIN TREAD LOOPING UNDERNEATH


looping thread on the bobbin side means that the upper tension is too loose... make sure it's threaded correctly.

Jun 14, 2009 | Feiyue FS288

1 Answer

Where do I oil?


I found my manual and oiled my machine. Then I found the solution to the thread breaking (online) - I just needed to drop my feeder! Thanks anyway. Alma

May 07, 2009 | Juki Sewing Machines

Not finding what you are looking for?
Juki 22-Stitch Compact Sewing Machine Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juki Furniture Experts

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

L Pfaff
L Pfaff

Level 3 Expert

11573 Answers

Shirley Neibarger

Level 1 Expert

55 Answers

Are you a Juki Furniture Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...