Question about Radio Communications

1 Answer

Sharper image freedom Bluetooth speaker model ESI-P400 discovery mode button sequence

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

To pair your device with The Sharper Image Freedom:

  1. Make sure your device has Bluetooth capability.
  2. Slide the POWER switch to turn on the Freedom, indicator will begin to flash.
  3. Follow the instructions of your device to pair the unit.
  4. Pair your device with the unit by selecting FREEDOM from your Bluetooth listings on your device or selecting YES. If prompted, enter "0000" as the passcode.
  5. Press play on your device and use controls on the unit to adjust desired volume.
Note: Once you have successfully paired your device, you typically will not need to repeat the above steps. Please ensure the Line-In cable is unplugged, the unit source is set to Bluetooth and your device has Bluetooth enabled.
Note: The effective Bluetooth range of the Freedom is approximately 30 feet.

Posted on Nov 19, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

charles0285
  • 160 Answers

SOURCE: bluetooth syncing

Usually to solve some pairing problems shut off bluetooth completely(no lights) Push and hold button until bluetooth comes on,flashes then steady light,you may have to hold button for ten seconds or more.Then put phone in pairing mode.
When asked for pass code enter 0000.Phone should show connected to bluetooth device.

Posted on May 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I've successfully paired the peaker but no sound is coming out


might I ask how do you know you were successfull if no sound is forth coming .

Mar 31, 2015 | THE SHARPER IMAGE ESI-P400 Freedom Premium...

1 Answer

How do i set the time?


Have you tried Sharper Image ? on customerservice@sharperimageonline.com
Surely they MUST be able to help with an instruction manual if you ask nice.

Aug 10, 2014 | Sharper Image Relaxx Dual Bedside Audio...

2 Answers

How do i sync my phone to my smps-650 wireless speaker


Turn on the Bluetooth

In Bluetooth Off mode, press and hold the Bluetooth button for about 5 seconds until a beep sound is heard and the Bluetooth button backlight flashes blue.

Press and hold the Bluetooth button for about 7 seconds to change to

Bluetooth pairing (linking) mode. The Bluetooth button backlight will flash blue and red. then go to the Bluetooth settings on your phone and select it there and enter 0000 for the default password


Then go to the bluetoothT

Jul 26, 2014 | Jensen Bluetooth Wireless Stereo Speaker

2 Answers

My soma bt speaker will no longer pair


On the iphone in bluetooth menu delete all soma speakers.
on the soma put it into bluetooth discovery mode
on the iphone wait till soma speaker shows up
select the soma speaker NOT the arrow on the right side
wait till the iphone reads 'connected'
if you are asked for a passcode use 0000

Mar 19, 2014 | Imation Xtrememac Soma Bluetooth Portable...

1 Answer

Sharper image manuals


I need the manual for the ESI-B622

Jan 03, 2014 | Sharper Image Relaxx Dual Bedside Audio...

1 Answer

I got a Sharper Image Bluetooth speaker system and it didn't come with a manual, I can't figure out how to set anything, (radio stations, bluetooth pairing, clock etc) it asks for a code when pairing


easy put your phone or device on and the other device look for it in the scanning option and pair its normaly asks for a pin that is the pin they give you with the phone for the bluetooth option 00000 is standard

Dec 28, 2013 | Sharper Image Portable Speaker System Dock...

1 Answer

Sharper image freedom Bluetooth model number ESI-P400 how to put in pairing mode.


To pair your device with The Sharper Image Freedom:

  1. Make sure your device has Bluetooth capability.
  2. Slide the POWER switch to turn on the Freedom, indicator will begin to flash.
  3. Follow the instructions of your device to pair the unit.
  4. Pair your device with the unit by selecting FREEDOM from your Bluetooth listings on your device or selecting YES. If prompted, enter "0000" as the passcode.
  5. Press play on your device and use controls on the unit to adjust desired volume.
Note: Once you have successfully paired your device, you typically will not need to repeat the above steps. Please ensure the Line-In cable is unplugged, the unit source is set to Bluetooth and your device has Bluetooth enabled.
Note: The effective Bluetooth range of the Freedom is approximately 30 feet.

Nov 19, 2013 | Radio Communications

1 Answer

Set time on sharper image esib622


Sharper Image ESI-B622 Relaxx Dual Bedside Audio Dock
1. Turn off power
2. Press and hold "Play/ Pause" button until time flashes on hour.
3. Use the << / >> buttons to change the time NOT the "+/-" buttons
4. Press and hold "Play/ Pause" button until time flashes on minutes.
5. Use the << / >> buttons to change the time NOT the "+/-" buttons
6. Press and hold "Play/ Pause" button until time flashes on days.
7. Use the "<< / >>" buttons to change the time NOT the "+/-" buttons

TRUST THIS WILL WORK BECAUSE I HAVE ONE AND THE INFORMATION THAT EVERYONE HAS PUT ON HERE WAS BS.

Jun 13, 2012 | Audio Players & Recorders

2 Answers

Pin code for Altec Lansing iMT521 SoundBlade BT Speaker to pair wit iphone 3gs


On your phone, make sure bluetooth is turned on (settings, general).

While your phone is in discovery mode, turn your bluetooth device on and put it in discovery mode (usually you have to hold the power button for 7-10 seconds).

Your phone will find the device, and you will be prompted to enter the devises PIN number (often 0-0-0-0). Your phone should pair with the device then.

Dec 18, 2010 | Altec Lansing T515 Portable Speaker for...

2 Answers

Reseting Jabra Bluetooth


Jabra headsets sometimes have a different way of being put into discovery mode. Most headsets just have you press and hold the big call button on it. Some jabra headsets require you to JUST hold down both volume buttons and some other jabra headsets require you to hold down ALL buttons on the headset to put it in discovery mode (or pairing mode as they sometimes call it)

Try of those combinations ... The light will stay solid when it's in discovery mode... Once the light is solid THEN have the EnV search for headsets.

hope this helps

Dec 18, 2007 | LG enV VX9900 Cellular Phone

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

1,101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1646 Answers

Brad Brown

Level 3 Expert

15478 Answers

Mike Charette

Level 3 Expert

1795 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...