Question about Pentair PUREX MINIMAX HEATER; THERMOSTAT, 60 CAPILLARY - 072022
Indicator lights show power and TSAT, AUX,BUT PRESSURE LIGHT AND HEAT LED ARE NOT WORKING HEATER WILL NOT TURN ON . COULDS THIS BE THE PRESSURE SWITCH
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This sounds like you have a problem with your pilot. You can check this with a small mirror to see if their is a spark when you turn it on. If you have any soot build up on the pilot that will stop the spark and keep it from lighting also. If you have a short on your pilot wire this could be the problem also. I hope this helps, good luck.
Posted on Dec 12, 2009
SOURCE: Purex Triton MiniMax Plus 400
if you have incoming power, you may have a bad transformer. those systems run on 24-28v. you can check from yellow wire to yellow wire coming off the transformer to see if you have anything coming out. must check wires coming out of the transformer to each other, it won't register if you check each one individually to ground. hope this helps...
Posted on Aug 18, 2011
Tips for a great answer:
Jun 23, 2014 | Pentair MiniMax CH Natural Gas Pool...
Aug 11, 2011 | Pentair Minimax NT Heater
Feb 15, 2010 | Pentair PUREX MINIMAX HEATER; THERMOSTAT,...
Dec 26, 2009 | Pentair MINIMAX NT TSI IGNITER
Nov 28, 2009 | Pentair Minimax NT Heater
Jul 13, 2009 | Pentair Pool & Spa
Jun 27, 2009 | Pentair PUREX MINIMAX HEATER; THERMOSTAT,...
Jun 05, 2009 | Pentair PUREX MINIMAX HEATER; THERMOSTAT,...
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: