Playback every time i go to view a photo, a bunch of information is displayed for 3 or so seconds, then dissapears. Any way to get rid of that? as its really annoying when your trying to scroll through photos.

Hi Paula,

Press the UP / DOWN arrows (on the wheel to the right of the display) while displaying an image to cycle thru the display options until you get what you want. Press LEFT / RIGHT arrows to advance / rewind images in the display.

Good luck!

While viewing the picture, press the DISP button to cycle through the different views.

Repeatedly press up/down on the multiselector to cycle through the different views of your photos until you find one you like.

1.Press the MENU button to display the menu screen, and
then press the F or G button to select the OPTION menu.
2. Press the ENTER button, and then press the F or G button
to select LAMP RUNTIME.
3. Press and hold the ENTER button for approximately
3 seconds. The confirmation screen, “LAMP RUNTIME
RESET.” is displayed and select OK.
4. Turn off the power.
�� This will reset the cumulative usage time for the lamp
unit to zero.
***Here you go and best of luck!***

Were they shot with the TZ3 or in another camera or from a computer?

Did you take the card and insert into computer/device to view photos?

Viewing photos can alter the format of the photos thereby preventing your camera from reading them.

I viewed some photos and rotated a few photos and my camera no longer recognizes the format.

good luck

You can get rid of the icon by first turning off the "Histogram" icon in the display/view menu.

Note: Histogram icon is the one that allows us to view and check the exposure correctness of a picture.

Hi!
This is a feature and not a defect of the K100D. You can turn this off by going to the menu and going into the second tab (playback menu). Once there, go to preview display, where you will have 3 options - off, histogram and brighten areas. Set this to off (your camera is set to brighten areas, that is why the white parts of your photos appear to be blinking).
Hope this helps!

Hi, the only thing I can see in the manual is on page 52 (below). You can scroll through the information provided using the up & down arrow keys on the multi-selector button. Scrolling though to the basic file info should give a clearer view. Perhaps if you select this option the next time you view it will default to it? I don't have the camera to try! Please update the question & let us know if the information given was useful to you - Good Luck!

There is, simply pres the Eye View finder button a few times, and it should go away. the button, is right on top of the camera next to your custom preset buttons. Also, you can go to the menu, and do the same thing withe the SYSTEM Tab.