Question about Hitachi 53UDX10B 53" Rear Projection Television

1 Answer

Green Lines and off-center near top

All of the sudden our picture went out of whack on us.. the bottom seems ok, but the whole top is concave, and the green is out of line. when i push the magic focus, all of the colors seem ok, except for the green. i unplugged it for a few days and tried it again, not helping of course. let me know if anyones heard of something similar. Thanks

Posted by on

  • 2 more comments 
  • hobbie001 Feb 28, 2008

    same thing the top of the pictures comes down in the middle of the screen

  • austin01 Mar 01, 2008

    My trouble is with a blue line coming down from the top. It is also concave but there is a curved yellow area also on my screen from the top and also coming up from the bottom.

  • eblaw377 Nov 21, 2008

    green line across top; red and green about an inch or more apart; green strip across center and red line off right

  • Anonymous Nov 22, 2008

    top is blue with yellow printing ghost.



×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

Sounds like you need the convergence kit part number X480295

Posted on Oct 08, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Projection HDTV Pansonic 47" Curving blue and green colors on top and bottom of screen.


You will need to replace your two convergence I.C.s.They are two large IC mounted on a large aluminum heat sink.Replace both,look for any burned resistors near them,replace those if needed,and readjust your convergence. Good Luck

Let me know if you need any further help

Mar 29, 2008 | Panasonic PT-47WX42 47" Rear Projection...

1 Answer

Shrunken picture


HI!
can you take a picture to your tv to see exactly what happen to your vertical problem!? then you can post here thanks!

Nov 02, 2007 | Proscan PS56670 56" Rear Projection...

1 Answer

Picture quality


Contact your local service rep as this sounds like a "not so easy fix' related to the main board or power supply (known issues with Mits boards, especially the capacitors). Cleaning, resetting, re-configuring will not likely make any difference. Verify the problem occurs across all input modes (such as DVD, etc). before taking any service actions.

Jun 25, 2009 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

Concave picture with rainbow effect at the edges


Hello, Check and replace IC1606 (P/N: 875292571) and IC1608 (P/N: 875982987). Best regards, Arpi http://www.partstore.com/sl/2/418644-ic-cxp86448635q-875292571.html

Apr 23, 2007 | Sony KP-57HW40 57" Rear Projection...

3 Answers

Concave Images with pink and green colors


you can get it your tv fix the problem is in the IF amp and video circuit.a convergence will also be neeeded.the tv is old but can give you some more life call a tech they will be your tv doc.

Apr 03, 2007 | Sony KP-57HW40 57" Rear Projection...

2 Answers

Sudden discoloration, ghosting, bowed horizontal lines in top and bottom of picture


The convergence ICs probably have a cracked solder joint on the foil side of the circuit board. Re-flowing the the solder would help. I will always replace the convergence ICs when doing this job. The labor remains the same and you will have to pay a few extra bucks for the parts. To fix this yourself, you will need to be able to identify the two convergence ICs, have a basic knowledge of electronics and be able to use a soldering iron. You will also have to do an alignment through the service menu.

Apr 01, 2007 | Samsung HC-P4752W 47" Rear Projection...

1 Answer

Sony KP-57WS500


the unit needs the convergence ic's replaced and probably a couple of safety resistors.average repaire are about 300 from a tv shop

Mar 04, 2007 | Sony KP-57WS500 57" Rear Projection...

Not finding what you are looking for?
Hitachi 53UDX10B 53" Rear Projection Television Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2334 Answers

The Knight
The Knight

Level 3 Expert

75157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...