Question about Televison & Video

Open Question

NO SIGNAL on grundig tv model gu22wdv4 on outside arial

Screen displays No Signal. Attached to outside antenna. Keeps counting down.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: pltv3250

do you get audio but no video? if the blue light is not glowing on the power supply.... its gone bad... the vents tend to clog with dust, overheat and burn out In 2 1/2 years I've gone thru 2 of them

Posted on Sep 11, 2007

Ad
Highdefjeff
  • 124 Answers

SOURCE: Visco LCD TV VSC-32V3 32

After connecting the cable to the TV, you should scan for channels. With the built-in cable QAM tuner, you should be fine with a scan for channels.

Try another TV to make sure that cable broadcasting is coming in...is there a set-top cable box involved?

Posted on Apr 08, 2008

  • 1 Answer

SOURCE: sirius sportster sp-tk1, always displays "acquiring signal"

Sirius does not stand behind their products, There is no out of warranty repair for their radios,  and they do not offer sites for repair. Seems  like this is a definite problem with this model. Their solution is to buy a new radio,(with all the new-docking,boombox etc) accessories. also they charge $75.00 to change to the new radio.I liked my sportster 1 because of the FM modulator. It just had to be centrally located and all the radios in my home picked it up(no docking) the new radios require $50.00 docking stations for each stereo location and radio location, unless you bring a boombox everywhere, and the sound isn't the same.    I feel there should be a class action lawsuit against Sirius for these reasons and I might look into it. What do all you think?

Posted on Aug 31, 2008

  • 374 Answers

SOURCE: combining output from dish home distribution with ota antenna

You should have your system setup in the following manner below:

You also will only be able to receive the HD locals with a HD OTA antenna. It is possible that you will need to turn the satellite off in this room to view the OTA's effectively.

Also you should use a splitter as depicted in the picture by the red boxes to combine signals of this frequency. The blue box is the diplexer on the incoming satellite feed and the black box is the seperator that most dual tuners use. If yours does not utilize this device you will have another cable coming from the outside of the house to the back of the receiver. The location of the ports on the back of the receiver in my diagram may differ in position on your receiver so obviously connect them to the proper port. I hope this ressolves the issue and there is no need to seperaate the signal at the remote tv as it will only be a duplicate of the same signal you have connected already as OTA and the TV2 backfeed are of the same frequency range.


296c440.png

Posted on Sep 23, 2008

  • 374 Answers

SOURCE: "No Signal" but aerial working ok on other tv in house!

Your son more than likely changed the input source. You may be able to change it back by pressing the channel up/down button or you may have to enter the menu on the tv and change inputs that way. PS's will usually connect using a video input using a red/white/yellow cords. You may also want to ensure the connections are in their proper place as I do not know how savvy your son is at changing the setup over to play his PS. If you use a modulator to connect to the TV-either the PS or aerial- ensure that it is powered up also. I hope this has been of assistance to you and thanks for using Fix Ya. If I can be of further assistance let me know.

Posted on Oct 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Since I canceled cable, bought a GE advanced HDTV a flat antennae , and a universal. GE remote,I have not seen TV. I cannot get the remote to give me a signal. Need phone support.


well the TV needs to be attached to some outside source of signal if not cable then you need an antenna .either inside or outside and that will depend on how close or far you are from the stations

Jan 29, 2015 | Televison & Video

1 Answer

I've hung the TVs on the wall and now it keeps switching itself off then on again


Some TV's will shut down when there is no signal at the antenna terminal. This is done so when a TV station shuts down at night for maintenance the TV goes off too. Your antenna is the problem. If you can get an outside antenna , that would solve the problem. If CCR's won't allow it then put the antenna in the attic and aim it as you would as if it were outside.

Dec 20, 2014 | Samsung Televison & Video

1 Answer

I bought a new samsung led 5 series tv but it keeps telling me i got no signal. the only connection i have is the antenna cable but it keeps telling me i got no signal even though iv done the whole auto...


Hi there,

Do you live in a house or some sort of complex? If you live in a home, then I would suggest verifying the connection to the outside antenna. If you live in a complex (apartment, condo, etc.) then the possibility exists that there is no outside connection (to any broadcast source) except for cable.

Good luck with that TV, my parents bought one in January and the picture is amazing.

Hope this helps some.

Mar 05, 2011 | Televison & Video

1 Answer

Am/fm radio stations not clear... I have the AM antenna attached... but there is no attachment for FM


First of all check for any nearby source of interference.....Move your unit away from all computers, fluorescent lights, neon lights, microwaves, cell phones, and cell phonemag-glass_10x10.gif chargers. These devises tend to produce noise in the medium frequency band, where AM radio is broadcast.
If the unit plugs into the wall with a nonpolarized plug (where both prongs are the same size), try reversing the plug inmag-glass_10x10.gif the outlet. Moving the plug to another outlet might help, too.
check for fault in the antenna lead, (common) or bad earth on the antenna to body
If you don't have an antenna connected to your FM receiver,With a receiver or tuner, connect a wire-loop or T-shaped dipole FM antenna to the back of your unit. Move the antenna until you get the cleanest signal. Use a signal-strength meter or display to gauge signal strength if your unit has one.
  • Step 2 If you're still not getting a good signal, try an indoor amplified antenna, which you'll find at an electronics store. Don't buy one unless you get a guarantee that you can return it for full credit if it doesn't solve your reception problems.
  • Step 3 If your signal is weak because you live a long way from the transmitter, install an outside antenna and mount it as high as is practical. If you're primarily interested in getting signals from one station or from a group of stations in one direction, get a directional antenna and point it toward the transmitters.
  • Step 4 If you're using a portable FM radio where the only antenna is the power cord, stretch the cord as straight as possible and experiment with positioning again.
  • Step 5 Temporarily switch to monaural mode to improve a weak signal on an FM receiver.

  • Read more: How to Strengthen FM Radio Reception | eHow.com http://www.ehow.com/how_114024_strengthen-fm-radio.html#ixzz0u9nhGXAL


    If you're still not getting a good signal, try an indoor amplified antenna, which you'll find at an electronics store.
    If your signal is weak because you live a long way from the transmitter, install an outside antenna and mount it as high as is practical. If you're primarily interested in getting signals from one station or from a group of stations in one direction, get a directional antenna and point it toward the transmitters. Make sure to Switch from stereo to mono.
  • Step 4 With a receiver or tuner, connect a wire-loop or T-shaped dipole FM antenna to the back of your unit. Move the antenna until you get the cleanest signal. Use a signal-strength meter or display to gauge signal strength if your unit has one.
  • Step 5 Alternatively, upgrade to a third-party passive or powered antenna.
  • Step 6 Install a rotatable roof antenna for the best possible reception. Connect your unit to an existing televisionmag-glass_10x10.gif roof antenna for the next-best alternative.

  • Read more: How to Improve FM Reception | eHow.com http://www.ehow.com/how_5554_improve-fm-reception.html#ixzz0u9oTaz4Y

    If you're using a portable FM radio where the only antenna is the power cord, stretch the cord as straight as possible and experiment with positioning again.





    Jul 19, 2010 | RCA RT2760 System

    1 Answer

    Do I need to buy a digital converter box to watch tv on an outside antenna?


    Yes, Even FreeView, requires a "Decoder" Box with an external Antenna attached, and the signal is fed from that, to the TV through the AV, External Inputs, ON TV, essentially making it a monitor, for the "Decoder" The Channels, Volume, are changed on the "Decoder".

    Apr 14, 2010 | Durabrand DWT2704 TV

    2 Answers

    My tomtom300 turns on but wont get signal


    try to restore or reset to factory settings in the menu

    Nov 18, 2009 | Tomtom GO 300 GPS Receiver

    1 Answer

    I have an RCA DLP tv and it is on an antenna attached to the house the mast kind. I guess what I want to know is the picture comes in fine but then the picture breaks up or freezes. I am guessing it is...


    You are correct in saying that it is a signal issue. There is not a lot you can do about it when using a outside antenna. You should be getting the best quality HD but you will always be limited by the reception. Since the HD signal is broad casted across the UHF spectrum, you may want to change the type of outside antenna you have to a UHF/HD type.
    It will be a cost but the only other thing you can do is to get cable installed and that will also be a cost also.
    Hope this helps,
    skyassoc

    Jul 16, 2009 | Televison & Video

    1 Answer

    Delphi SKYFi3 XM Radio Repeater


    You begin by setting up your existing (((XM))) antenna the one that came in your home kit (not included in repeater package) in a location that gets good reception of the (((XM))) signal. This may be outside, or on a south facing window sill. This antenna gets plugged into the rear of the Delphi (((XM))) Radio Signal Repeater Transmitter. A power jack is right next to the antenna connection, and should be plugged in and to the wall with the included power supply. There is also a "PWR OUT" selector switch on the rear of the unit which allows you to control the strength of the signal transmitted from the unit.

    Once the power and antenna are attached, both blue indicator lights will light up on the face of the unit. The blue antenna indicator will light up only to signify that the antenna is attached correctly. It does not let you know whether your antenna is in a location receiving a good (((XM))) signal or not. You will have to look at the signal strength indicator on your (((XM))) radio receiver do determine best location for the (((XM))) antenna.

    Once you have this setup, place the Repeater Antenna close to your existing (((XM))) Radio and plug it into your antenna jack on the (((XM))) radio cradle. This connector is identical to your (((XM))) Home Antenna provided with all Boom boxes and (((XM))) home receivers and kits so compatibility is guaranteed. The Repeater Receiver Antenna does not require any separate power connections. Hope this helps!
    SATELLITE RADIO WAREHOUSE

    Jul 10, 2009 | Delphi SKYFi3 XM Radio Receiver

    1 Answer

    We had an xm radio installed in our 2010 prius after we bought it. It was ''satellite ready'' but needed the radio. We signed up for xm radio and tried to get the signal. The radio was tuned to channel...


    go to who installed you sat radio have them pull the antenna and receck the the receiver number it sounds like you have the wrong reciever number even one digit off and it will never conect even tho you have preview and sat radio paired with an antenna will recieve preview

    Jul 10, 2009 | 2009 Toyota Prius

    1 Answer

    Can't view my digital channels


    Get an outdoor antenna. Digital signals very rarely reach indoor antennas unless you are within ten miles of the signal origin.

    May 12, 2009 | Broksonic CTGV-5463TCT TV

    Not finding what you are looking for?
    Televison & Video Logo

    Related Topics:

    17 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    74459 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Electro Med Services...
    Electro Med Services...

    Level 3 Expert

    6694 Answers

    Are you a Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...