Question about Sewing Machines
Good day Need a manual for Kingstar industrial machine overlocker - ks757f-516m2-55 - or is it possible, we got a kingstar 4 needle overlocker with 1 stiching needle, to dissable the 1 stiching needle?
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: skip stitch
The three most obvious causes (other than that of the machine possibly being slightly out of time) are:
1) Too small of a needle size - increase the size.
2) A needle that has a flaw / defect - change the needle.
3) Needle not inserted correctly, either not pushed all the way up into the needle bar, or not installed facing the correct place. On this machine, the small "scarf" in the needle (an indent just above the eye) shouldface the right side of the machine.
Posted on May 07, 2009
-If your bobbin case is inserted from the left side of the machine, then the scarff( indentation on the back side of the needle ) should be on the right side as you insert the needle.
Posted on May 02, 2010
Tips for a great answer:
Oct 02, 2017 | Sewing Machines
Jun 15, 2016 | Sewing Machines
May 22, 2016 | Singer Sewing Machines
May 10, 2014 | As Seen On TV Handy Stitch Mechanical...
Mar 24, 2014 | Sewing Machines
Mar 21, 2014 | Sewing Machines
Jul 02, 2017 | Juki MO-623 Mechanical Sewing Machine
Jul 17, 2018 | Sewing Machines
46 people viewed this question
Usually answered in minutes!