Question about Refrigerators

Open Question

Have a problem with the ge profile mainboard and model #s

What is the difference if I will buy mainboard with my model.# 200D4860G015 or with different model #WR55X10929 or WR55X10942.

Posted by on

  • jess Nov 19, 2013

    my board is really bad cause when i opened a back panel it smelled like burn and then we recognize that their was some dark spots was burned so that why im trying to find a mainboard and i dont know if the WR55x10942 can go to GE Profile fridge.

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 291 Answers

SOURCE: I have a ge profile fridge model # PDS22SHRBRSS needing help

Yes, you have to cut the wiring as the instructions stated. Not all the models have to have wiring cut, so read carefully to see if yours is one that needs to have the wiring cut. If it is not, then you have another problem, and you will have to let us know what the origional problem was before you replaced the board. If your model requires cutting, you may have damaged the main board by not doing this. Unplug the refer and follow the instructions carefully and test to see if it works. Good luck, Appliance Specialists.

Posted on Feb 04, 2010

woodchuck789
  • 4059 Answers

SOURCE: GE Profile side by side refrigerator has a flow

The flow meter measures the amount of water going through it to deliver the correct amount of water. The water valve opens when the ice maker or dispenser demands water and closes when the demand is removed in your case by the flow meter.

On most ice makers the flow of water to the ice maker is controlled by a timer.

Posted on Aug 11, 2011

SOURCE: Installed a WR55x10942 in place of WR55X10473 now compressor wont turn on

what was wrong with board you changed if then really you put everythjing as it was maybe the board is faulty

Posted on May 25, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GE Profile PFSS6PKWBSS control panel display does not light up


more than likely the mainboard in the rear of the unit is defective,as the dispenser board gets its power from the mainboard and the dispenser bpoards normally dont go bad

Feb 01, 2013 | Refrigerators

1 Answer

Ge profile refrigerator PSF26PGTB defrost timer


your defrost timer on this model is an ADC type timer(automatic defrost timer) and is located on the mainboard in the lower rear on the back side of the unit,its part # is WR49X10152

Aug 25, 2012 | GE Refrigerators

1 Answer

Fridge not cold


Check your Model # and Ser#. Probably your Motherboard and condenser fan board. No help from GE but file a complaint 1-800-386-1215. Board # GEA Part no. 200D4860G015 is junk and on every piece of internet writings this board is warranty, however, they(GE) go by the ser# of your fridge. $391 to have A&E come out a replace in 5 minutes. I would recomend working locally.

Jul 10, 2010 | GE Profile Stainless Bottom-Freezer...

1 Answer

I have a GE Profile series microwave model #


the magnatron has blown they are very expensive to repair i suggest you buy a new microwave

]hope this helps

Jun 25, 2010 | General Electric Microwave Oven

1 Answer

Need to replace lamp in GE Profile microwave model JE1590SH02


PMG!!! I called GE and was told that changing the light bulb is not a consumer replaceable part!!! Are you kidding me!! She told me I had to have a GE tech come out. Makes you want to buy GE appliacnces, right!

Mar 01, 2010 | GE Microwave Ovens

1 Answer

I have a ge profile fridge model # PDS22SHRBRSS needing help


Yes, you have to cut the wiring as the instructions stated. Not all the models have to have wiring cut, so read carefully to see if yours is one that needs to have the wiring cut. If it is not, then you have another problem, and you will have to let us know what the origional problem was before you replaced the board. If your model requires cutting, you may have damaged the main board by not doing this. Unplug the refer and follow the instructions carefully and test to see if it works. Good luck, Appliance Specialists.

Feb 04, 2010 | GE Profile Stainless Bottom-Freezer...

1 Answer

Leak on bottom of freezer on ge profile side by side 13 years old


maytag has several great models and absolytly worth it remeber u get what u pay for . and any fridge u buy get the extened warranty that way no worries for awhile

Mar 18, 2009 | GE Profile 26.6 cu. ft. Side-by-Side...

2 Answers

Freezer not working again!


here is link my trouble description:

http://forum.appliancepartspros.com/refrigerator-freezer-repair/2538-clicking-noises-back-ge-refrigerator-2.html

Mar 08, 2008 | Refrigerators

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

1,053 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Brian Coughlan

Level 2 Expert

275 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...