Question about Zoom X7n Dsl 2/2 Modem/router/gw
I recently changed to a different telephone, had Earthlink make it ADSL active but could not get the DSL light to stop blinking - I've done everything Earthlink suggested and what I could find on the Internet but no luck. The line seems fine since the telephones work. I've connected with a filter/splitter and directly to the outlet.
Try removing the splitter, if it works then you might have a faulty splitter and you need to get it replaced. You might check if you are using the first phone jack in your house / apartment. I remember that was key when i was on DSL. Hope you get it sorted out, not having a working connection is very annoying.
Posted on Nov 18, 2013
Testimonial: "Thank you - I did try it with and without the splitter and no difference. I am attaching it to one of the original phone jacks. Should I try one that was added later?"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: DSL Flashing
You dont need both. Do the following:
Unplug your speedtouch from the phone line at the back of the speedtouch unit. Plug that cable into your Zoom. Then plug one end of an ethernet cable into router and one end into your PC. Type http://10.0.0.2 into a web browser (eg. Firefox or Internet explorer) username/password is admin/zoomadsl go to basic setup and input your ISP username and password (the one given to you by your internet provider) under PPP. Click configure my connection. Save changes and then write to flash (both buttons on bottom of page)
Posted on Jul 01, 2009
SOURCE: no connection to internet
You need to do a reset to the router hold in the the rest buttons for 30 seconds.Then shut down the pc and try it again.
When it boots up see if there are any errors.
I also want you to go (command prompt) type cmd in the run box and type in just like this
see if an ip address comes up
then type in ipconfig /release
wait then type this
Wait till it collects info then restart computer it should resolve after that its a communication error with the router and the pc.
Posted on Mar 03, 2010
Tips for a great answer:
Feb 01, 2015 | Computers & Internet
Nov 18, 2013 | Zoom X7n Dsl 2/2 Modem/router/gw
Aug 18, 2011 | Computers & Internet
Jan 23, 2011 | D-Link DIR-600 Router
Sep 23, 2009 | Westell Wirespeed LiteLine 6100...
Jun 19, 2009 | Computers & Internet
Nov 13, 2008 | 2wire HomePortal 1000HW DSL Modem and...
Mar 24, 2008 | Zoom X6 (5590) DSL Modem (55900003)
Jan 28, 2008 | Westell Wirespeed VersaLink...
1. Check the for the Physical connection Between the router and dsl the modem
2. And make the sure the dsl light or the status is solid green in the dsl modem
3. If the dsl light or link light is bilking on the dsl modem . call your service provided and run a line test to confirm if there is any problem with the telephone line
Oct 16, 2007 | D-Link AirPlus DI-524 Wireless Router
117 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: