Question about Exercise & Fitness

Open Question

Weslo treadmill crosswalk 5.0t model number WLTL29310.0

My display shows lines and will not come on

Posted by on


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 257 Answers

SOURCE: How do you adjust the belt for a Weslo Cadence 815 treadmill?

Hi, I don't have a manual on your particular treadmill but most all treadmills use the same type of belt tension and tracking, which is an allen screw adjustment on the rear tension bar. One on either side. You should have been provided an allen wrench with your treadmill, if not then use one of your own the proper size. Make the adjustment with the unit running at its slowest speed. Clockwise tightens the tension and will draw the belt. Good Luck, this should Fixya!

Posted on Mar 14, 2009

  • 1 Answer

SOURCE: Weslo Cadence 450 Treadmill Manual

When turned on it acts like the walking surface is grabbing.Itgoes and stops its not as bad when speed is increased,but it still feels like it is grabbing.

Posted on Jun 20, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My weslo pro crosswalk 7.9 will not go all the way up or down

There are a couple of good DIY treadmill repair videos on youtube.
If this one doesn't address your issue, brouse around a little.

Jan 11, 2015 | Weslo Exercise & Fitness

1 Answer

Need to know what the panel means, no manual

go to the next web: or

sincerley. God bless you

May 07, 2012 | Weslo Crosswalk 365e Treadmill Walking...

1 Answer

Display does not work but incline keeps going up and down

1)If your display have batteries please change for a news ones.
2)adjust the sensor reed switch about 1/8" or 3mms aprox see diagram attached.
3)Use DMultimeter for to measure +5Vdc for I..C(EPROM,ROM,etc)
is coming from the board (Main Control Motor Board or lower board)
4)tight the connector (flexible cable) well to the lower board).
Remember about 90 percent from function of the treamill is coming from the lower board.
Now you will have a strong answer about the troubleshooting from your treadmill.

Nov 22, 2011 | Weslo Pro Crosswalk 7.8 Treadmill

1 Answer

Missing a key for Weslo treadmill crosswalk 365e- can you assist? I live in calgary Alberta

Here is a parts list for the Weslo Crosswalk 365e - scroll down to "Safety Key" and that is the part you need. They are pretty cheap so I recommend getting a couple extras in case you lose one again.

Mar 22, 2011 | Exercise & Fitness

1 Answer

How do I get a manual for a Weslo G-30 treadmill? I do not know the model number

Remove the front cover, inside you should find a technical sheet. The model number will be there.. has a user manual available for your model Weslo model# WLTL19205

Dec 14, 2010 | Weslo Cadence Ct 5.8 Treadmill

1 Answer

I purchased a weslo pro crosswalk 7.8 it doesn`t have a safety key how do i know which key and where to get 1 thanks bill

hi weslo treadmill keys are mostly the same, i have seen some on ebay selling for under £15.00. or if you contact icon health & fitness 08451770512, these people are the main suppliers of weslo treadmills and parts. they are uk leeds based.

Nov 20, 2010 | Weslo Pro Crosswalk 7.8 Treadmill

1 Answer

I just purchased the treadmill this morning from K-MART.It was a floor model.They had no manual with it.It will not turn on.Please advise.

Is there a key that has to be inserted in the control box? this would act as a deadman switch so that when it gets pulled out the machine stops. without it the machine won't start.

Dec 12, 2009 | Weslo Pro Crosswalk 7.8 Treadmill

1 Answer

Weslo pro tread belt

Hi, Yes it is! the belt is not free floating but travels on a slide. When there is pressure on it ( from someone) it rubs on the slide underneath. When you step off it should stop the rubbing noise. There you go, this should Fixya!

Mar 24, 2009 | Weslo Pro Crosswalk 7.8 Treadmill

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers


Level 2 Expert

115 Answers

Tom Chichester

Level 3 Expert

36514 Answers

Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides