Question about GE Televison & Video

1 Answer

No picture there is volume no picture

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

No picture can mean different things to different people. To a technician it often means no raster. Since we have sound it most likely means we have no EHT supply to the tube and our attention will be drawn to a problem in the line output stage. But television receivers are devious litle devils and often hide the true nature of the problem. A fault in the frame output stage often results in a blank screen. Shurely not you'd get a bright horizontal line across the screen I hear you say (my good hearing is a result of listening to peoples service problems for the last fifty years) well no since
in most sets the beam limiting will take effect, blanking the raster to prevent image burn on the screen. If you increase the A1 voltage on the flyback transformer, it's right next to the focus adjustment you will see the horizontal line become visible. Turn the A1 back so the line disappears. Check LT supply to frame stage for open circuit safety resistor, replace frame output ic and check all electrolytic capacitors around the IC.
Give yourself a pat on back for not being fooled by the little devil and explain to your television that your more than a match fot it.

Posted on Nov 19, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to use the screen snapshot and every time I use the volume and on/of button the picture takes the picture but it shows the volume control status.


It is possible that you are not pressing the two buttons at the exact same time. If you press the volume button a little bit before the power button you will have to wait for the volume bar to fade away before you take another screenshot.
If this isn't the issue then the phone might have a programing error

Feb 22, 2016 | ZTE Cell Phones

1 Answer

No picture on my flat screen but I have volume


Is there back light or is there a picture if you shine a flashlight at the screen, looking at an angle?

Aug 26, 2014 | Hisense Televison & Video

1 Answer

Tv has no volume or picture but turns on


replace the mainboard and power supply.

Jan 21, 2013 | Televison & Video

1 Answer

Picture went out on flat screen volume is fine


Hello,

sounds like your vertical circuit was going bad then might have overheated and killed the power supply. a repair cost might range around $300.00
Good luck...

Jun 01, 2010 | Televison & Video

1 Answer

I don't know how to use the pip button, i know it means picture in picture and it's like a double screen but how do you change the channel or volume on each side of the screen?


You can only hear the audio from one picture at a time. You can change the volume the same way you would normally change the volume. Let me know if you have any further questions.

Nov 20, 2009 | Hitachi CLU-4324UG Remote Control

1 Answer

P61960


I was tring to remove the concave off my screen and came across a setting where you can make the picture larger or smaller. On the TV, not the remote, press and hold the menu button, press and release the power button, press and release the volume up button and release the menu button. P0 and V0 will be displayed on the screen press the volume up button until the V0 is V76. Press the channel up button until P0 is P11 and press the volume up/down button to make the picture larger/smaller. If you need to center the picture press the channel down button until P11 is P10 and press the volume up/down button to center your picture. I hope this helps

Aug 18, 2008 | RCA P61960 61" Rear Projection Television

1 Answer

Picture


sorry dry solder joints this model was a disaster for this not worth repairing

Oct 12, 2007 | Toshiba 32A35 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74482 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a GE Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...