Question about Saws

1 Answer

Makita How To wire the switch

Need to know how to wire the relay switch

Posted by on

  • Chuck Green
    Chuck Green Nov 19, 2013

    This is not a jig saw but a band saw. It is a Makita 2114C band saw with a Omron switch.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 142 Answers

Did you look up the parts breakdown at Makita.com? They often have wiring diagrams on the parts breakdowns. Just enter the model number in the search window and it should take you to a page that will have a link to the parts breakdown.

Posted on Jan 27, 2014

Testimonial: "I tried that first but they don't even list the saw."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring diagram for switch on makita mlt100 saw


ring Makita on 01908 210710 and ask for technical

May 30, 2012 | Makita Saws

1 Answer

Bhp452 makita cordless drill smoking. how can i troubleshoot?


the switch or motor is wired incorrectly. These parts are polarity sensitive. The smoking I would assume is from the old switch and now the rotation is reversed. Let me know if you need more assistance.

Dec 10, 2011 | Makita 18 Volt Cordless Hammer Drill Kit ...

1 Answer

My Makita DCS520i chainsaw will not shut off. I replaced the kill switch and that did not work. The wire and connections look fine. I assume the ignition coil is ok since it starts fine. Anyone know what...


Hi,

OK. The kill switch breaks the circuit to the plug. Since you replaced the kill switch, assuming it is good (did you test it with a multimeter?), the problem has to be in the wiring to the plug from the switch. If the plug gets power all the time, then the circuit is complete all the time.
I'd replace the wires from the switch to the plug.

Hope this helps. If it does, I'd appreciate a 4 thumbs up. Thanks,

Handie Andie

Apr 26, 2011 | Makita Garden

1 Answer

Wiring diagram for HP1501 using 6519867 switch Replacing old switch with 6519867. Different terminals from old one.Like to find a wiring diagram so I can install it... Thanks, Les


Makita doesn't furnish online schematics for replacement parts, BUT you can call their tech department and they should be able to send one as a PDF. Call them at 1-800-4625482. They do have one online for the original switch at "makitausa.com" but not the replacement. Let me know if you need more assistance.

Apr 10, 2011 | Makita Drills

1 Answer

Hi all I have a Makita LS1013 that I got from a friend. I am trying to repair the switches in the handle as they are blown. I have the replacement parts I need to do the job. However someone seems to have...


gdoran681, The information I sent you should have the wiring you will need. Let me know if you have just the LS1013 or if it has the lights on it (LS1013FL)

Rob Popp
Phoenix Repair

Nov 09, 2010 | Makita 10" Miter Saw LS1030N

1 Answer

Wiring varible speed swith for a Makita JR3000V reciporcating saw


The replacement switch, is it Makita and was it a direct replacement for the original part? That could make a difference. I looked at the schematics for this tool and they do not furnish the wiring codes but I think you are on the right track. To make sure though I would call Makitas tech support people at 1-800-4625482 and have a wiring explosion sent to you. Let me know if you still need more help and I will contact them or call a local dealer that I know.

Jul 24, 2009 | Makita JR3050T Recipro Saw 9 Amp

1 Answer

Makita table saw switch wiring


i need the owner/operator manual for a makita table saw model 12711 please tell me what steps to take to get one

Mar 01, 2009 | Makita Saws

2 Answers

Makita table saw switch wiring


After much trial and error, a little smoke, and wrecking one replacement switch, I solved a similar problem with my Craftsman Cmpd Mitre saw. Different saw, but likely the same principles are involved.
If the switch is a double pole single throw switch, with one side normally open (N0) and the other normally closed (NC), and the saw has a separate wire for the brake, this will probably work.

One side of the switch should have contacts that are normally open (NO) and only connect when the switch is ON. The Hot (Black) wire from the plug connects to the wire on the machine side (red or maybe black) through this NO side. So, connect these two wires via this NO side and the saw will run when the switch is ON but will have no brake; so far so good.
There should be another wire (Not the neutral white) which is the brake wire. This gets connected to one of the connection sites of the Normally Closed (NC) side of the switch. From the other connection site of this NC side run a short "jumper" wire (of the same guage as the other wires) to the Machine Side of the NO side of the switch (same place as that Red or Black? wire above) .
What seems to happen is this:
There's no power to the machine or the brake when the switch is OFF. Turn it ON and power goes from Hot through the NO (now closed) side and the saw runs. The brake doesn't run when the saw runs because the NC switch is now open. Turn the switch OFF and the NC switch is in fact closed and power is transfered to the brake via the jumper wire from the still spinning armature which now acts as a generator (alternator?). Once the brake has done its job and the armature stops spinning there's no power anywhere until you turn the switch ON again.
Or at least that's the theory, and in my case it works; no more smoke.

Jan 07, 2009 | Makita 2703 10" Table Saw, Electric Brake

Not finding what you are looking for?
Saws Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saws Experts

Tom Chichester

Level 3 Expert

33326 Answers

ray gallant

Level 3 Expert

41478 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1775 Answers

Are you a Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...