Question about Toshiba E-STUDIO 450 Copier

Open Question

How to clear error coge c570

I have a toshiba e-studio 450 copier when I connect the finisher to the printer I have a error code C570 I know what dose that mean but how to clear it

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 990 Answers

SOURCE: what is error code f105 for an toshiba e-studio 520 copier?

Dear sir; There have your solution, try to turn power off and on, if can not reset , you have to replace HARD DRIVE, f105 is hard drive problem. good luck! if you need more help please let me know, HAVE A HAPPY HOLIDAY !!!

Posted on Dec 20, 2008

007tech
  • 95 Answers

SOURCE: paper jam and message C570 - Call for service

The C570 is a communication error between the finisher and the main unit. Check to make sure the connector from the finisher to the copier is plugged in properly.
You could try re-seating connectors on the finisher board - it may help.
Make sure the power supply to the copier is not being shared with some other piece of equipment (like on a power strip) that could be causing interference/noise to the power supply for the copier.
If problem persists..could be bad IPC board(finisher) or CPU board (copier).
Hope this helps

Posted on Apr 18, 2009

  • 59 Answers

SOURCE: I have a Toshiba e-studio 150 copier. L-1 error code flashing

hi there is problem L-1 means that u have problem CCD MCU Harness Disconnect

Posted on May 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Toshiba e-studio 257 and have an error code C970 on the screen. Can you help me?


C3D2 EPU board memory old parts detection error: The EPU board cannot detect the new process unit when the equipment is started in the EPU replacement mode ([7] + [START]). C410 Thermistor or heater abnormality at power-ON: Abnormality of service call the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON. C430 Thermistor abnormality after abnormality judgment: Abnormality of the thermistor is detected after a specified period of time has passed from power-ON (including ready state). C440 Heater abnormality after abnormality judgment: The temperature of the fuser roller has exceeded the range of control or does not even reach the range. C450 Thermistor abnormality during printing: Abnormality of the thermistor is detected during printing. C4C0 Fuser unit new/old detection fuse abnormality C550 RADF I/F error: Communication error has occurred between the RADF and the scanner. C551 Document feeder model detection error: An optional document feeder that is not compatible to this equipment is installed. C570 Communication error between Engine-CPU and IPC board C580 Communication error between IPC board and finisher C5A0 EEPROM communication abnormality (LGC board) C8E0 ADF communication abnormality: The system has to be stopped because the control abnormality occurred C940 Engine-CPU abnormality C970 High-voltage transformer abnormality: Leakage of the main charger is detected. CA10 Polygonal motor abnormality: The polygonal motor is not rotating normally.

These are the error cods list. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/

Jul 08, 2016 | Toshiba Office Equipment & Supplies

1 Answer

Please help me, e-studio 211 code c21


its code not reset replace Scanning system OR
CIS unit initialization error Otherwise check connection of these

Aug 26, 2011 | Toshiba E-STUDIO 450 Copier

6 Answers

How to reset error code c21 in the Toshiba e studio 166?


how can to reset error code c21 my toshiba e-studio 166 printer

Feb 28, 2011 | Toshiba e-STUDIO166 Printer

1 Answer

Service code c570


Can you specify the Make and Model Number ?

Jul 24, 2009 | Office Equipment & Supplies

1 Answer

Paper jam and message C570 - Call for service


The C570 is a communication error between the finisher and the main unit. Check to make sure the connector from the finisher to the copier is plugged in properly.
You could try re-seating connectors on the finisher board - it may help.
Make sure the power supply to the copier is not being shared with some other piece of equipment (like on a power strip) that could be causing interference/noise to the power supply for the copier.
If problem persists..could be bad IPC board(finisher) or CPU board (copier).
Hope this helps

Apr 17, 2009 | Toshiba E-STUDIO 850 Copier

2 Answers

Compatable cd changer


any uni-link changer will work

Nov 23, 2008 | Sony WX-C570 CD Changer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

102 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

pkwc

Level 2 Expert

254 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...