G&G Combat Machine CM16 Raider L Gas Blowback Rifle Ver ll

Question edited for full 'make model (what it is)'.
Question moved from Garden to a Daisy category, albeit a rifle.

Video here

https://www.google.com/search?q=daisy+5501+rebuild

There are some parts schematics but not yours.

https://www.google.com/search?q=daisy+powerline+5501+parts+diagram

,,

Question edited for clarity.
Question moved from Cars to correct category.

Resting volts on the battery should be 12.4. This rises to 13.2 volts when charging. Amps (current) is stored in the battery for starting. Typical amperage to the battery for charging would be 2 amps to 6 amps depending on battery state. The Regulator should monitor that. They do have a history of electrical issues and of the batteries heating up.

https://www.google.com/search?q=2009+yamaha+raider+electrical+problems

More information and rectifier testing.

https://www.google.com/search?q=2009+yamaha+raider+too+many+amps

..

The latest electric gun in today's market is the hybrid gun of airsoft. The hunting and shooting process can be done properly with the use of these hybrid guns. Laser sightings and torches are used for comprising the parts of Airsoft gun.

Often with semi-automatic rim fire rifles, the most common cause of jams/failures to feed are related to improper cleaning. Most of these low-powered rifles utilize a blowback action to fire, and thus require a clean breech and chamber to provide proper obturation of the cartridge. Give your rifle a thorough cleaning, including a detail strip and clean. If you are experiencing other types of stoppages such as failures to extract or failure to feed, you may be experiencing a mechanical issue such as a worn extractor claw, or a weak magazine follower spring.

call AEG Micromat with your question.

I’m happy to assist further over the phone at https://www.6ya.com/expert/josh_8f8ad0a8f7e0e6d3

Go out back and shoot something.

Blowback Airsoft Guns are Airsoft weapons that seem much the same as true firearms, since genuine firearms, well some, are secured in a Blowback layer of paint or something to that effect.

The entire slide on the gun with re-cock itself consequently after every shot then generally in the wake of shooting the complete cut after the last shot the slide stays open. The main issue with these airsoft guns is they will consume through your gas. CO2 or green gas both can have blowback.

your problem is that your carb float is set wrong

I'm affraid you'll have to start all over.

1. Uninstall the game.
2. Defrag the hard drive.
3. Re-install the game.
4. Apply the patch (NO COMPATIBILITY MODE).
5. Start the game from the shortcut.

Well it sounds like the valves are not closing all the way. If you are not familiar with lapping valves, you will need to take it to a shop to get it done.
Good day.