Question about Canon MP250

1 Answer

Canon mp250 flashing power, alarm, ink LED P 1 0

The alarm, power, and ink lights are flashing and the LED reads P 0 1

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 125 Answers

Hello,

Have you tried unplugging it and plugging it in again?

Posted on Nov 22, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Canon i9950

Five flashes: Print head not installed / Print head not installed correctly / Defective print head
Install the print head. If the print head is already installed, remove the print head and check the electrical contacts for foreign matter, then reinstall.
For the i9950 ONLY: When the CD-R tray is set in the printer, remove the CD-R tray and set the paper output tray to the paper print position, then install the print head.
After reinstalling the print head, you may need to realign it.
If this error still remains, the print head may be damaged

Posted on Jun 23, 2008

antking
  • 51 Answers

SOURCE: Canon PIXMA MP145

E27 means waste ink absorbed is full need to clear out but you still can't print because only 80% or 70% are full.try this method to solve you problem.

Resetting Printer Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970 procedure:

•Turn off the canon printer
•Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.
•Hold the Power Button, release the Resume Button.•Not releasing the Power Button, double click “Resume” and release Both Buttons.after that wait the green flash will become light on then.
•Click “Resume” for Four times
•Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.

if this ok so u can print or can't. i still suggestion you bring you printer to computer shop for clear out inside spam printer.

Posted on Sep 01, 2009

SOURCE: /*mp250 error code p03 alarm

manual replacing the print cartridges --> try rotating the left white gear back and forward releasing the mechanical lock of the print head it is a small plastic peace in the back of the of the head ...replace the cartridge as you need ...


about the error p03 it indicates a mechanical jam (head carriage - paper jem - paper pickup mechanizm - head cleaning mechanizm ) also clean carfully all sensors from inside ... it can give you a mechanical jam if blocked

Posted on Dec 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MX300 waste ink full


1) With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF button. (DO NOT release the buttons). The Power LED lights in green to indicate that a function is selectable.

2) While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.)



3) While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the ON/OFF and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED

4) When the Power LED lights in green (and "ServiceMode Idle" is displayed on the LCD), press the Stop/Reset button the specified number of time(s) according to the function listed in the table below, then press the ON/OFF button. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED



1) In the service mode, press the Stop/Reset button 4 times to enter the ink absorber counter resetting mode

.
2) In the ink absorber counter resetting mode, press the Stop/Reset button the specified number of time(s) according to the kind of ink absorber whose value should be reset to 0%.

Aug 13, 2014 | Canon PIXMA Office Equipment & Supplies

1 Answer

Canon pixma printer 250 ,alarm lamp and power lapm glow and p 0-7 occur


Ink Cartridge is not installed in the correct position. Refix the ink cartridge

Sep 22, 2011 | Canon Pixma Mp250 Allinone Inkjet Photo...

1 Answer

I have a canon pixma mp250 and error P07 flashing.Now,I refill blac and colour cartridges,and clean ink absorber,but still flashing P07.How to reset printer? Best regards, Misko


its mean absorber full..(i think)
Check this steps :
1: Unplug power and USB
2: Open door and hold power button.
3: Connect power.
4: Close door, then release power button
5: Connect USB and an press power to use.

1 Press the power button to turn off the printer.

  • 2 Hold the "Stop/Reset" button while pushing the power button. While still holding down the power button, release the "Stop/Reset" button and then push it twice in a row.
  • 3 Wait approximately 20 to 30 seconds until the LED shows 0.
  • 4 Push the "Stop/Reset" button four times in a row.
  • 5 Push the power button twice.
  • 6 Turn off the printer by pushing the power button one more time. The printer is now reset. Next comes resetting the counter on the cartridge.
  • 7 Unplug the power and the USB cables from the printer.
  • 8 Open the cartridge door and hold down the power button.
  • 9 Reconnect the power cables while still holding down the power button.
  • 10 Close the cartridge door and release the power button. The ink cartridge is now reset.



  • Aug 11, 2011 | Canon Pixma Mp250 Allinone Inkjet Photo...

    1 Answer

    Canon IP5200R printer. Green & red led`s flash 20 times, pause & repeat. print head will not come out of park position on righthand side. Fault occurred while printing a photo error 6500 displayed


    Hello!

    Error 6500 or green and red flashes 20 times, mean hardware error. Particularly, the Logic Board Assembly

    There are two possible fix: first is to reset the printer's waste ink counter and the second is to replace the Logic Board Assembly (part # QM2-2733)
    alpug_67.jpg


    Reset the Waste Ink Counter:
    1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the
    Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a
    function is selectable.)
    2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power
    button.)
    3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
    4) When the Power LED lights in green, press the Resume/Cancel button 4 times (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

    For technical help:
    • For toll-free technical support, please call 1 (800) OK-CANON (1-800-652-2666) during regular business hours (currently Monday-Friday 10:00 a.m. - 10:00 p.m. ET, excluding holidays).

    • Toll-free TDD Support Line for the Hearing Impaired is available Monday - Saturday (excluding holidays) at 1-866-251-3752
    Hope this helps!

    May 18, 2011 | Office Equipment & Supplies

    2 Answers

    My canon pixma ip4200 flashes orane 5 times


    How to reset waste ink / blinking printer canon ip4200

    With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)

    While holding the Power button, release the resume/Cancel button. (DO NOT release the Power
    button.)

    While holding the Power button, press the Resume/Cancel button 2 times, and then release both
    the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

    When the Power LED lights in green, press the Resume/Cancel button the specified number of
    time(s) setting).
    After pressing the Resume/Cancel button the required number of times -you must press the On/Off button to perform the task. For Example Pressing Resume/Cancel 1 time, then press On/Off - does a Service Test Print

    Time(s) LED indication Function Remarks 0 times Green (Power) Power off When the print head is not installed, the carriage returns and locks in the home position capped.
    1 time Orange (Alarm) Service test print .
    2 times Green (Power) EEPROM information print
    3 times Orange (Alarm) EEPROM initialization
    4 times Green (Power) Waste ink counter resetting
    5 times Orange (Alarm) Destination settings After entering the destination settings mode, press the Resume/Cancel button the specified number of time(s) to select the destination. For detail, see "Destination settings procedures" below.
    6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)
    7 times Orange (Alarm) Reserved
    8 times Green (Power) CD / DVD check pattern
    9 times Orange (Alarm) CD / DVD print position
    correction (horizontal: X direction)
    10 times Green (Power) CD / DVD print position
    correction (vertical: Y direction)
    11 to 13 times Orange, Green, Orange(Alarm,
    Power,Alarm) Return to the menu selection
    14 times Green (Power) Left margin correction Not used in servicing.
    15 times Orange (Alarm) Return to the menu selection

    If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

    Thanks, Joe





    Dec 23, 2010 | Canon PIXMA iP4200 InkJet Photo Printer

    1 Answer

    Waste ink absorber - what is it and how do we rep[lace it?


    plz try
    1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
    2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
    3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
    alternately, Alarm in orange and Power in green, starting with Alarm LED.)
    4) When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s) according to the function listed in the table below. (Each time the Resume/Cancel button is pressed, the Alarm and
    Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) [hth: I believe the power button has to be pressed once more after cycling the alarm button to complete the action. The power/resume-cancel button LEDs toggle to help you count.]

    Time(s) LED indication Function Remarks
    0 times Green (Power) Power off When the print head is not installed, the
    carriage returns and locks in the home position capped.
    1 time Orange (Alarm) Service test print See 3-4. Verification Items, (1) Service test print.
    2 times Green (Power) EEPROM information print
    See 3-4. Verification Items, (2) EEPROM information print.
    3 times Orange (Alarm) EEPROM initialization [hth: does not re-initialize Waste ink counter]
    >>>> 4 times Green (Power) Waste ink counter resetting
    5 times Orange (Alarm) Destination settings [hth: not applicable]
    6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)
    [hth: 7-10 not applicable]
    11 to 13 times Orange, Green, Orange (Alarm, Power, Alarm) Return to the menu selection
    14 not used in servicing
    15 Orange (alarm) return to the menu selection,.

    Note: If the Resume/Cancel button is pressed 16 or more times, the Alarm or Power LED lights steadily without
    any changes.

    Note : if the alarm light is flashing 15 times at turn-on [cartridge not recognized error], none of these procedures seem to work.

    Aug 26, 2010 | Canon PIXMA iP4000 InkJet Photo Printer

    1 Answer

    Printer reads "Waste Ink Near Full"


    www.fixyourownprinter.com/forums/inkjet/50418
    The above link will assist you.
    1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
    2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
    3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
    alternately, Alarm in orange and Power in green, starting with Alarm LED.)
    4) When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s) according to the function listed in the table below. (Each time the Resume/Cancel button is pressed, the Alarm and
    Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) [hth: I believe the power button has to be pressed once more after cycling the alarm button to complete the action. The power/resume-cancel button LEDs toggle to help you count.]

    Time(s) LED indication Function Remarks
    0 times Green (Power) Power off When the print head is not installed, the
    carriage returns and locks in the home position capped.
    1 time Orange (Alarm) Service test print See 3-4. Verification Items, (1) Service test print.
    2 times Green (Power) EEPROM information print
    See 3-4. Verification Items, (2) EEPROM information print.
    3 times Orange (Alarm) EEPROM initialization [hth: does not re-initialize Waste ink counter]
    >>>> 4 times Green (Power) Waste ink counter resetting
    5 times Orange (Alarm) Destination settings [hth: not applicable]
    6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)
    [hth: 7-10 not applicable]
    11 to 13 times Orange, Green, Orange (Alarm, Power, Alarm) Return to the menu selection
    14 not used in servicing
    15 Orange (alarm) return to the menu selection,.

    Note: If the Resume/Cancel button is pressed 16 or more times, the Alarm or Power LED lights steadily without
    any changes.

    [hth: if the alarm light is flashing 15 times at turn-on [cartridge not recognized error], none of these procedures seem to work. If anyone knows how to defeat this error, I would like to know.]

    Aug 24, 2010 | Canon PIXMA MP780 All-In-One InkJet...

    2 Answers

    How di I reset the ink counter on a canon mp620?


    I found this at fixyourownprinter.com. Seems it works on most mp models and may work on your 620.

    1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
    2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
    3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
    alternately, Alarm in orange and Power in green, starting with Alarm LED.)
    4) When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s) according to the function listed in the table below. (Each time the Resume/Cancel button is pressed, the Alarm and
    Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) [hth: I believe the power button has to be pressed once more after cycling the alarm button to complete the action. The power/resume-cancel button LEDs toggle to help you count.]

    Time(s) LED indication Function Remarks
    0 times Green (Power) Power off When the print head is not installed, the
    carriage returns and locks in the home position capped.
    1 time Orange (Alarm) Service test print See 3-4. Verification Items, (1) Service test print.
    2 times Green (Power) EEPROM information print
    See 3-4. Verification Items, (2) EEPROM information print.
    3 times Orange (Alarm) EEPROM initialization [hth: does not re-initialize Waste ink counter]
    >>>> 4 times Green (Power) Waste ink counter resetting
    5 times Orange (Alarm) Destination settings [hth: not applicable]
    6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)
    [hth: 7-10 not applicable]
    11 to 13 times Orange, Green, Orange (Alarm, Power, Alarm) Return to the menu selection
    14 not used in servicing
    15 Orange (alarm) return to the menu selection,.

    Note: If the Resume/Cancel button is pressed 16 or more times, the Alarm or Power LED lights steadily without
    any changes.

    Nov 08, 2009 | Canon PIXMA MP620 All-In-One InkJet...

    1 Answer

    The printer is showing "waste ink collector full",not printing


    Most cannons reset the same try this:

    1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
    2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
    3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
    alternately, Alarm in orange and Power in green, starting with Alarm LED.)
    4) When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s) according to the function listed in the table below. (Each time the Resume/Cancel button is pressed, the Alarm and
    Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) [hth: I believe the power button has to be pressed once more after cycling the alarm button to complete the action. The power/resume-cancel button LEDs toggle to help you count.]

    Time(s) LED indication Function Remarks
    0 times Green (Power) Power off When the print head is not installed, the
    carriage returns and locks in the home position capped.
    1 time Orange (Alarm) Service test print See 3-4. Verification Items, (1) Service test print.
    2 times Green (Power) EEPROM information print
    See 3-4. Verification Items, (2) EEPROM information print.
    3 times Orange (Alarm) EEPROM initialization [hth: does not re-initialize Waste ink counter]
    >>>> 4 times Green (Power) Waste ink counter resetting
    5 times Orange (Alarm) Destination settings [hth: not applicable]
    6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)
    [hth: 7-10 not applicable]
    11 to 13 times Orange, Green, Orange (Alarm, Power, Alarm) Return to the menu selection
    14 not used in servicing
    15 Orange (alarm) return to the menu selection,.

    Note: If the Resume/Cancel button is pressed 16 or more times, the Alarm or Power LED lights steadily without
    any changes

    May 07, 2009 | Canon Bubble Jet S900 InkJet Photo Printer

    3 Answers

    Printer Problem


    This was not the sollution for my pinter..
    My Magneta is half full and my error led is also blinking 15 times

    I found this service manual for the IP4200 but this methode also doen not solve my error led..

    Is their someone who has the sollution for this strange error?

    1) With the printer power turned off, while pressing

    the Resume/Cancel button, press and hold the Power
    button. (DO NOT release the buttons. The Power LED
    lights in green to indicate that a function is
    selectable.)
    2) While holding the Power button, release the
    resume/Cancel button. (DO NOT release the Power
    button.)
    3) While holding the Power button, press the
    Resume/Cancel button 2 times, and then release both

    the Power and Resume/Cancel buttons. (Each time the

    Resume/Cancel button is pressed, the Alarm and
    Power
    LEDs light alternately, Alarm in orange and Power
    in
    green, starting with Alarm LED.)
    4) When the Power LED lights in green, press the
    Resume/Cancel button the specified number of
    time(s)
    setting) (THEN HIT THE POWER BUTTON >AFTER THIS< TO SET).

    Time(s) LED indication Function Remarks
    0 times Green (Power) Power off When the print head is

    not installed, the carriage returns and locks in the

    home position capped.
    1 time Orange (Alarm) Service test print .
    2 times Green (Power) EEPROM information print
    3 times Orange (Alarm) EEPROM initialization


    >>>>>>>>THIS ONE
    4 times Green (Power) Waste ink counter resetting<<<<<<<<<<<<


    5 times Orange (Alarm) Destination settings After
    entering the destination settings mode, press the
    Resume/Cancel button the specified number of time(s)

    to select the destination. For detail, see
    "Destination settings procedures" below.
    6 times Green (Power) Print head deep cleaning
    (Cleaning of both black and color)
    7 times Orange (Alarm) Reserved
    8 times Green (Power) CD / DVD check pattern
    9 times Orange (Alarm) CD / DVD print position
    correction (horizontal: X direction)
    10 times Green (Power) CD / DVD print position
    correction (vertical: Y direction)
    11 to 13 times Orange, Green, Orange(Alarm,
    Power,Alarm) Return to the menu selection
    14 times Green (Power) Left margin correction Not used

    in servicing.
    15 times Orange (Alarm) Return to the menu selection


    Time(s) LED indication Destination CD / DVD print
    0 times Green (Power) No change of the destination
    1 time Orange (Alarm) Japan Supported
    2 times Green (Power) Korea Not supported
    3 times Orange (Alarm) US Not supported
    4 times Green (Power) Europe Supported
    5 times Orange (Alarm) Australia Supported

    Oct 30, 2007 | Canon PIXMA iP4300 InkJet Photo Printer

    Not finding what you are looking for?
    Canon MP250 Logo

    164 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Canon Office Equipment & Supplies Experts

    kakima

    Level 3 Expert

    102366 Answers

    old marine
    old marine

    Level 3 Expert

    1919 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...