Question about Maytag Washing Machines

1 Answer

Washer 4000 series 4.5 cu ft

F21 door locked won't work help!!!!!!!!!!!!!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

The newer model Maytag washers are manufactured by Whirlpool and have Whirlpool parts. If this is a Maytag Epic model washerwasher 4000 series 4.5 cu ft - lb_icon1.png, "F21" is a Long Drain error code. This is an indication that you have an obstruction somewhere in the drainage system. Most commonly, this means there is something lodged in the drain pump or inlet line running from the wash tub to the pump. There is a white screw off cap on the drain pump that you can remove to inspect the pump impeller and clean. The following link explains:

http://www.fixya.com/support/r3608588-f21_error_code

Included is a follow-on link that explains how to check the drain pump to clean. You may also have to remove the inlet hose that runs from the bottom of the wash tub to the inlet side of the drain pump. Debris and small articles of clothinglb_icon1.png such as sock or under garments can commonly clog in this area as well causing the drain cycle to fail.

Posted on Nov 17, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
onthejob5130
  • 640 Answers

SOURCE: What is the capacity of a my washer.

4.2 thats about 26 pounds

Posted on Jan 04, 2009

TheMobilian
  • 8220 Answers

SOURCE: hi, i have a kenmore

Drop front panel
open pump sump
clear objects.
Retry

Posted on Jan 08, 2009

thydzik
  • 86 Answers

SOURCE: What is the cu ft capacity of a Kenmore Series 80

The capacity of the Kenmore 80 series is 3.0 cubic foot. The 90 series washer is 3.2 cubic foot.

Posted on Jul 16, 2009

  • 220 Answers

SOURCE: f21 code on kenmore he2 plus

Clean the filter in the pump behind the bottom panel,but remember it's full of water,If it's on a pedestal you can take the pump loose from the mounting pull it out a little and put a small pail or bucket under it before you open the trap.if it isn't on a pedestal it's a bit more challenging unless your in a basement with a floor drain. Open it very slowly and let the water drain a little at a time don't take it all the way out or you'll be in for a flood....good luck

Posted on Sep 03, 2009

  • 1 Answer

SOURCE: door is locked code F21 wont run or cycle or empty water

Try hitting the stop button twice - we are having the same problem but ours isn't draining

Posted on Jan 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a maytag 5000 series washer. We are getting an f21 error code. I unscrewed the white drain filter and cleared it. There was little in it. I keep getting the f21 error though. Can you help?


Search Results

    whirpool f21 error code - YouTube

    ? 3:04
    https://www.youtube.com/watch?v=b24PVv-ORqg
    Jul 1, 2012 - Uploaded by davidmontabon
    whirpool f21 error code. ... Maytag , Whirlpool Washer Repair - Drain pump error, no drain - F9E1- MHWE201YW00 - Duration: 4:29.

    My maytag 5000 series steam washer stopped and said Sud ...

    www.fixya.com/support/t8682656-maytag_5000_series_steam
    Mar 17, 2011 - my maytag 5000 series steam washer stopped and said Sud and now says ... Clicking this will make more experts see the question and we will .... I bought aMaytag 3000 seris in 2008 and I am getting these messages: F21 ... Maytag 5000 Series washer F21 error code was flashing and door will not open.

    Whirlpool/Kenmore/Maytag & more-F02/F21 & Sd error codes

    fixedappliance.blogspot.com/.../whirlpoolkenmoremaytag-more-f02f21-...

Feb 09, 2016 | Maytag Washing Machines

1 Answer

Error Code F24 Maytag 4000 Series Front Load Washer


This video will show you how to open your Maytag 4000 series washing machine door that is stuck shut
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 04, 2013 | Washing Machines

2 Answers

My magtag 5000 series washer is flashing error code F21, It was in the middle of a wash cycle and now the door is locked and it won't open. How do I at least get the door open. I have unplugged the


Unplug the washer. Then plug it back in and press the button that turns it off. This should unlock the door. Same thing happened on mine and there was a kink in the drain hose. Once I unkinked the hose, unplugged it, plugged it back in, turned it off, then I was able to run a drain & spin cycle to get the water out of the load that was in the washer. I then ran a full wash cycle (they'd gotten stuck in the first drain & spin cycle of a wash) and everything seems to be fine now.

Dec 04, 2011 | Maytag Washing Machines

2 Answers

Bosch 500 series front load washer less than 6 months old. Getting code E27 when turning it on... suggestions before I call service?


E27 means there is a problem with the door lock.

Unplug the machine for 30 minutes and try again. If the error code returns you will need to replace the door lock assembly. Open and close the door two or three times to reset the sensor. Sometimes the door has been closed too hard and the sensor reading fails.

Replace the door lock assembly on the washer. Refer to your washer manual for the correct part numbers.

Check to see if your Bosch washer is still covered under warranty. If so, you could receive free replacement parts and service for the faulty door locks.

Hope this helps (remember to rate and comment this answerr).

Jul 16, 2011 | Bosch Evolution 500 Series B20CS51SNW 20.2...

1 Answer

How do I cancel when the indicator "E: " is showing and the door is locked?


Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} This is for the WFMC6400, but it could help.
To manually unlock the door lock system, perform the following steps:
1. Unplug the power cord from the outlet.
2. Remove the lower toe panel.
3. Reach up along the inside of the front panel and

locate the bottom of the door latch assembly.
4. Located on the bottom of the door latch

assembly is a teardrop shaped tab.
Gently pull the tab down approximately 1/4 inch,

or until a click is heard.
5. The door may now be manually opened.
Pl give me a ‘very helpful’ rating for the free help, thanks!

Apr 04, 2010 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

1 Answer

Can you give me the measurements height width depth of the KTRC19KK?


Depth Cab. Width Door Width Cab. Height Overall Height
Model size "A" "B" "C" "D" "E"
STANDARD MODELS
19 cu.ft. 30 3/4" 29 1/2" 29 3/4" 65 1/2" 66 1/4"
21 cu.ft. 29 3/8" 32 1/2" 32 3/4" 65 1/2" 66 1/4"
22 cu.ft. 30 3/4" 32 1/2" 32 3/4" 65 1/2" 66 1/4"
INTEGRATED MODELS
19 cu.ft. 31 1/2" 29 1/2" 30 1/8" 65 1/2" 66 1/2"
22 cu.ft. 31 1/2" 32 1/2" 33 1/8" 65 1/2" 66 1/2"
ARCHITECT® SERIES MODELS
19 cu.ft. 32 7/8" 29 1/2" 29 3/4" 65 1/2" 66 1/4"
22 cu.ft. 32 7/8" 32 1/2" 32 3/4" 65 1/2" 66 1/4"

Jul 07, 2009 | Refrigerators

1 Answer

500 series washer


Hey try this, open the doo rand oil the door lock mechanism. next turn the machine on and push start/pause button. repeat ,repeat, repeat. if it does not release open round acees door at the bottom of the washer,there should be a manual unloccking pull inside pulldown to unlock(very thin strip of plastic. repeat process. also make sure rubber gasket around tub is secure and flush around washer openig.

Aug 31, 2008 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

1 Answer

Help me


hold the signal level for 10 secs to unlock.

Apr 13, 2008 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...