I need to connect to wifi using a dongal - Humax HFA100 DTV Receiver

What "Dongal?" Electro help

you may need a wireless dongal availble at most tv outlets harvey norman ect

I am not able to connect with reliance SMART INTERNET SIM . WITH My micromax CDMA2000 HSIA MODEM Dongal !!
Please help !!

You have to use an external dongal connected with a micro usb to standard usb cable.

i hope u need bluetooth dongale for connection.

Hi there,

How old is the desktop?
Cause usually Desktop do not support Wireless connections if you want have a wirless connection then you need to buy a External dongal and install the same.

Post back for more solutions.
Hope this helps.
Cheers!!!!

You need to update the drivers asap, and ensure your service pack is uptodate too

If this printer has Wi-Fi then yes you can connect to your router.

The printer must have an internal Wireless PServer it will have a Node Name this is what is needed to connect to the Router. If your router is set for Wireless and the SSID is working (ie no wirless isolation) then when you set up the printer driver it will ask you to connect to the router via an ethernet 100MB patch cable first to load the correct type of port for the printer drive, you only need do this once.

Then if the printer is set to boot in WLAN mode it should get an IP address via DHCP on your router.

Hope this helps, please rate my advice I will post more help if needed just add on to the end of this post.

Your hard drive went bad. It seems that the kernel and some sectors on it unable to accept any data for installation. Try to use a Partition Magic software before installing Windows operating system by doing the format manually. Then you can install you Windows operating system that you want. Thank you.

my lapto problem is network adapter and wifi and vga drive pleas help me iam living in iraq