Question about Euro-Pro Steam Generator EP8001 Iron
Anyone know a source for repair parts for the various Euro-Pro seam generator irons? Alternatively, anyone know where one can get repairs done?
SOURCE: Manual for Euro-Pro G6118H
I don't know if you have the number for the euro pro customer service department; but, I had the same problem, called customer service, and had a manual emailed to me. The manual came within a couple of hours via email. In case you don't have the number and still need a manual for your unit, try calling 800.798.7398. I hope this helps and good luck!
Posted on Jul 18, 2008
The screws holding the unit together are T-20 TORX screws; the center post makes them anti-tamper TORX screws. These screws are used in applications in which the manufacturer does not want the average consumer to attempt repairs. Please don't take this wrong, but if you have to ask about the "unusual 6-sided screw", then you shouldn't be opening the unit.
Unfortunately, when the heating element rocker switch gives out (3-4 years), it is usually about time to overhaul the entire iron (both the tank portion as well as the iron portion). Other things that can cause problems are the thermostat and the pressure actuator.
Contact A2A Consulting at 1-888-830-3563; they can probably fix the unit for you.
Posted on Feb 03, 2009
you can repair it yourself. it's easy. you just need to change the whole cord. open the iron and add new cords and you are goo to go.
Posted on Nov 05, 2009
some time no part of our property go bad but what will need is to service them from there dysfunction
the problem of your iron could be from the element and the wire ,the element is the heat provider while the wire is the power supply from the electric
But the fact is that ,the problem of your iron is disconnection of element from the wire what you need to do fix it to unscrew your iron and trace the wire down to the element and see the disconnection am toking about and fix it back
thank you and thanks for using fixya.
Posted on May 31, 2010
Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.
Electric Iron not Heating Up or not Working Right
Posted on Jul 14, 2010
Tips for a great answer:
Jun 25, 2011 | Euro-Pro Steam Generator EP8020 Iron
Jan 15, 2011 | Euro-Pro Steam Generator EP8001 Iron
Aug 19, 2008 | Euro-Pro Steam Generator EP8001 Iron
Jun 19, 2008 | Euro-Pro Steam Generator EP8001 Iron
May 18, 2008 | Euro-Pro Steam Generator EP8001 Iron
Oct 07, 2007 | Euro-Pro Steam Generator EP8001 Iron
295 people viewed this question
Usually answered in minutes!