Question about RCA P56830BL 56" Rear Projection Television

1 Answer

Rca rear projection convergence problem

Have an rca rear projection tv and the convergence is off i dont know how it got that way, but i went into the settings and did the auto cenvergence wich by the way seams to stop short, process doesnt take as long as it used to, and ive treid manually doing it. i got the red and the blue lined up with the cross and the picture is still messed up

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers
Re: rca rear projection convergence problem

Convergence outputs reliable.Suspect power supply to control convergence bad.Small PCB mounted above two main PCB.Check STK730-010 & associated circuitry. If This info not helpful, please provide complete service # and chassis number.

Posted on Oct 08, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Turned on my RCA P46924 today and played fine for 5 min. then picture curved and turned to 3 different colors seperated on same screen. Turned TV off and now will not turn back on. Please help?

Ur tv have convergence problems,before ur convengence ICS totally went dead.U must have tools like soldering iron,solders,solder witch,and know how to solders to fix this problems ur self.Must replaced 2 convergence ICS,and some or all it resistors.Tries websites like Tv repair, to buy a convergence kit to repair it ur self.The shop will cost u $300-350 for parts and labors.

Apr 28, 2010 | RCA P46924 46" Rear Projection Television

1 Answer

Cant find convergence on menu screen

The HD61LPW42 is a RCA DLP which doesnt have convergence. If the convergence is out of alignment you have a three CRT TV such as the D52W19, HD52W59 RCA Check the model number from the rear tag and let me know what the model number is.

Nov 21, 2009 | RCA HD61LPW42 61" Rear Projection HDTV

2 Answers

My screen image is concave, like a funhouse mirror. The image is distorted at the top and bottom of the screen. Any suggestions?

it is called pincushion circuit. either the diode went bad, the capacitors, or just maybe a simple solderond the bad connections.

Nov 17, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

52 inch rca projection tv turn tv on and there are horizontal

Go to menu then setup look for convergence if you Do NOt see convergence then you have a open fuse FL231 Located on right side of FBT there is 3 in a roll small brown rectrangle looking caps but they are Fuses it will be in the one in the middle.

Aug 18, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

RCA D52W23 convergence chip

THERE is no convergence ICs on these sets it does have convergence board it has serveral ALuminnin heat sinks on it If comcast was at fault it would have fried your SSB board which will shut TV down Cost of Board is 352.00

Feb 13, 2009 | RCA D52W23 52" HDTV CRT TV

1 Answer

Tv help!!

ALright. you might have a simple inexpesive problem...MIght... first question If you go into setup menu do you have convergence option.. if you dont this it is a small special fuse that blows because of bad connections... can you solder electronic components. the parts about 5 bucks and takes less than 30 min to replace. Let me know if this is the case.

May 15, 2008 | RCA P52937 52" Rear Projection Television

1 Answer

Rca 52" projection tv...d52w20

You could have a bad red tube or the socket on the tube may be bad; completely different from convergence

Dec 28, 2007 | RCA D52W20 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 2 Expert

397 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides