Your video card doesn't process sound, so of course, no sound will be passed on to the HDMI cable from the DVI output, as there is no sound to be passed on.
To get sound, you'll need to plug in an audio cable from your computers speaker output, and hook that up to your TV using your choice of connection (be it fiber optic, or 1/8in audio cable).
9-SOCKET_DATA . LOOKUP(S) = = O CAPTURELSPNOISPWSP_PATCHES.CPP:1313 IEXPLORE.EXE ASSERT IN LSP tHIS...
(More)
9-SOCKET_DATA . LOOKUP(S) = = O CAPTURELSPNOISPWSP_PATCHES.CPP:1313 IEXPLORE.EXE ASSERT IN LSP tHIS IS A READING i GET, WHEN MY MONITOR, MESS'S UP. IT SEEMS THAT WHEN MY COUMPUTER IS COLD(JUST TURNED ON) T5082-eMachines. It (bilt in ATI) don't have enough power? to run the screen AOC- lcd monitor it worked fine at first. but when windo's started down loading all there up dates to fix Vista, it got a lot worse. I have wavey line's on screen can't read any thing for about 15min. OK I gess or hope I'v given you enough info. ? Thanks , James
Apollo A9200SE-128MB+TV+DVI/A: VGA connected. At power up, good picture for 10 sec, then PC shuts...
(More)
Apollo A9200SE-128MB+TV+DVI/A: VGA connected. At power up, good picture for 10 sec, then PC shuts down "off mode in 5 sec". PC runs ok with other graphics cards. Thanks, George
what can i upgrade to from an ATI radeon x300/x550/x1550 graphics card with 256mb. And is it easy to...
(More)
what can i upgrade to from an ATI radeon x300/x550/x1550 graphics card with 256mb. And is it easy to do and at a reasonable price.
After upgrading to Leopard, installing a 500 giga external drive for effortless time machine...
(More)
After upgrading to Leopard, installing a 500 giga external drive for effortless time machine backups, and a 2.0 gb ram expansion to 2.5, this week I connected an outside monitor to my iMac (a 20 inch Samsung 2043 NWX with a pixel resolution of 1680 by 1050).
It works great. Here is the problem: As my iMac only has display mirroring capabilities (it does not have extended desktop that is available in later models), I cannot turn of the built in display, nor can I toggle between the two.
There is a third party patch that claims it gives my iMac extended desktop, but I do not like to install third party patches on my iMac. Heck, at this point I'm not even sure that with extended desktop I could turn the internal display off to begin with.
The native graphics support card is quite capable: ATI Radeon X600 Pro graphics processor using PCI-Express and a maximum resolution of 2048 by 1536 pixels. The status shows it is presently supporting two displays simultaneously: One at 1440 by 900 pixels (my native iMac display), and another of 1680 by 1050 (my 20 inch Samsung).
I tried dimming the display but the control is disabled whilst on video mirroring mode. I tried playing with the internal monitor set up but I cannot set the display to zero using this option either.
Let me know your thoughts please. Best regards, Roberto A. Lovato