How to change language on dlink dir 610 router

Try this: http://www.dlink.com.sg/Starhub/downloads/DIR-655QIG_v1.pdf OR, http://ftp.dlink.ru/pub/Router/DIR-655/Description/DIR-655_manual_A2_1%5B1%5D.01(EU).pdf OR, http://www.dlink.com/us/en/support These should do the trick.

You do not need the disc. Using you browser, login into the router using the default IP 192.168.0.1 unless this has been changed and you should be able to configure your router.

You should be able to configure your router using the wizards. Login is ADMIN and Password is blank unless it was changed by the user.

Did you enter the security key (password)? It may be your laptop? Try resetting the D-Link to default settings and connecting to the laptop. They reconfigure the SSID and Security Key. Write down the info for future use. Here's a user Manual: http://www.dlink.com/uk/en/home-solutions/connect/routers/dir-600-wireless-n-150-home-router

You can find the user manual here: http://www.dlink.com/uk/en/home-solutions/connect/routers/dir-600-wireless-n-150-home-router

Yes, try setting the router to a higher channel. Router default settings are suffer from interference from cordless land line phones, up to a mile away.

Hi,
You could download it here : http://drivers.softpedia.com/get/FIRMWARE/D-Link/DLINK-DIR-615-Rev-C-Firmware-301.shtml
or
http://driverscollection.com/?H=DIR-615&By=D-Link
Regards

It appears your brother has changed your wireless router settings.
You can reset the Dlink back to the default settings by -
Power off the Dlink and press and hold the RESET button on the back of the Dlink and the power on the Dlink. Hold the RESET button for 5 secs. until the LEDs flash at the same time.
Connect a LAN cable from the computer to the Dlink. Open a browser and enter the Dlink's configuration URL
http://192.168.0.1
Default login = admin
PW = blank (just press Enter)
You can now change the admin password and set up a new passphrase (ie encryption)
For details on how to secure your wireless from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

you will need to change some settings on the router.
reduce the MTU. if the MTU settings on the router is 1500 then change 1365 also you will need to open the some ports on the router.
Click Here for more info

try opening the ports on your router go here to find out how to do it

http://www.portforward.com/english/routers/port_forwarding/Dlink/DIR-300/DIR-300index.htm

just open the dlink ip homepage and configure the wireless settings



sagar