Whirlpool RBS275PD Electric Single Oven Logo
Posted on Nov 14, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Whirlpool GR396LXGQ 0 Self Cleaning Oven

Oven wouldn't heat, EO -F3-, changed out the oven temp. sensor, starting heating, but kicked off after a couple of minutes. Sent it through a whole 3.30 hour self clean. worked the whole time. (could see both elements lit, and produced much heat). tried again, same thing, kicks off after preheat couple of minutes into cook time, or if no pre heat, kicks off a couple of minutes into back cycle. Broiler seems to work fine.

1 Answer

trevor bransden

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

  • Expert 107 Answers
  • Posted on Nov 22, 2013
trevor bransden
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

Joined: Nov 20, 2012
Answers
107
Questions
1
Helped
32413
Points
132

Have controller checked

1 Related Answer

Anonymous

  • 226 Answers
  • Posted on Oct 17, 2010

SOURCE: Whirlpool oven RBS245prs....did a self

try unpulg it

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

WHEN MY WHIRLPOOL BUILT IN OVEN MODEL RBS305PRS00 IS BAKING IT SOMETIMES CUT OFF AND YOU HEAR A CLICKING NOISE AND IT WILL DISPLAY EO F3.I CAN TURN THE OVEN OFF AND IT WILL BEEP AND DISPLAY EO F3.AFTE

That's an oven sensor error. Replace the oven sensor. If you still have the error, check the wiring and/or replace the timer/clock board.

Good luck!
0helpful
1answer

Whirlpool Oven GW395LEGT6 Replaced the oven temp sensor But oven will pre-Heat and run for 15 minutes then shut off with Error code EO F3

Have you tried pulling the connectors off the control board and reinserting them. If you still have problems the control board could be the issue.
Sep 24, 2014 • Ovens
0helpful
1answer

Whirlpool GR396LXGQ oven comes on by itself & goes into clean cycle, code reads E2 -F3-

Whirlpool F3 faults relate to temperature problems in the oven. In the case of the error E2-F3, F3 is the general fault code and E2 is the specific error code. An E0-F3 error indicates that the oven's temperature sensor is open; E1-F3, that the temperature sensor is shorted; E2-F3, that the oven temperature has exceeded the maximum rated 575 degrees Fahrenheit in "Cook" mode; and E3-F3, that the oven temperature has exceeded the maximum rated 950 degrees Fahrenheit in the clean mode. Here is the probe to order.

The part comes with a 365 day, any part, any reason return policy.
0helpful
1answer

My oven has an error displaying F3E3

F3-E3 Cleaning Temp over heat. Replace Sensor
Typical sensor:
themobilian_2655.jpg
Sensor location is usually here:
themobilian_2656.jpg
Whirlpool oven service manual
themobilian_2657.jpg

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

0helpful
1answer

Had an error code F3E2 show up on the screen

F3-E2 Oven over heat. Replace Sensor

0ae81cf.jpgOven sensor should measure around 1100 ohms.
Oven sensors should not be grounded. Continuity from frame to either sensor wire is a bad sensor.
Got popcorn? Heres a movie:


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

0helpful
1answer

Oven won't heat up. F-3 appears looks like a

Hi


Thanks for using FixYa. Error F3 in your range/oven means oven temperature sensor circuit failure. To resolve this issue you’ll have to check the oven temp. sensor circuit if the reading is more then 1100ohms then it should be replaced however, if the rating is fine then it is the Electronic Range Control (ERC) that has gone bad & should be replaced. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee
2helpful
1answer

F3 message displayed

HI, you oven temp sensor if malfunctioning. the circuit is open. its basically dead. Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.
Not finding what you are looking for?

186 views

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...