Question about Sylvania 6615LG 15 in. EDTV-Ready LCD Television

1 Answer

No remote or service manuel

How do i set tv up for regular air channels

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers
Re: no remote or service manuel

You need a remote to access the menu. Call the phone number on the label on the back for assistance.

Posted on Oct 07, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I used my Haier tv on cable service. I moved to rural area where there is no cable service. I tried to use my tv on an HD antenna, cannot get a signal. ???

You gotta try to reprogram your channels, but first you must have an external antenna to receive the signal. Follow your TV manual and set it to automatically reprogram it. It may take a long time since it will try to setup regular (analog), digital and cable channels (analog and digital as well). Depending on how far you are from the TV stations, you may also have to install a signal booster (amplifier) before attempting to reprogramm the channels, so you can get more channels without glitches. If you have internet you can also watch TV over it.

- For over-the-air TV - here you can enter your zipcode to see which channels are available in your area:
Which OTA HDTV Channels Can Get Over The Air OTA DVR Tablo

- For over-the-internet TV: This guide is very helpful.
How to Watch Live TV Online

Satellite is another good option. Dish Network or DirectTV are 2 good options for remote areas. I have never had satellite, so I can't precise with one is the best for you.


Jan 25, 2015 | Haier Flat Panel Televisions

1 Answer


You should be able to get OTA (over the air broadcast) just make sure you have an antenna plugged in and that the tuner is set to AIR.

Setting the Tuner Mode
If you are using a device that is connected to the RF input, such
as an external antenna or cable TV connection, you must set the
tuner mode.
1. Press the MENU button on the remote. The on-screen menu is
2. Use the Arrow buttons on the remote to highlight the
Settings icon and press OK. The Settings menu is displayed.
3. Highlight Tuner and press OK. The Tuner Mode menu is
4. Highlight Antenna or Cable and press OK.
5. Press the EXIT button on the remote.
Scanning for Channels
Before the TV can detect and display channels and their
associated information, you must scan for channels. A channel
scan may also be necessary when the TV has been moved to an
area where different free-to-air broadcast television channels are
1. From the Tuner Settings menu,
highlight Auto Channel Scan.
The auto channel scan begins.
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the EXIT button on the

Apr 08, 2014 | Flat Panel Televisions

1 Answer

Lg tv fault finding

You are listening to DVS (Descriptive Video Service), for the visually impaired. I assume this is on over-the-air television. Your remote control probably has a button marked "Audio" or "SAP" (Separate Audio Program). This is so you can listen to different audio channels, which usually have another language, or in your case DVS. If it is not a button on the remote, you may have to go in to the TV's menu to find it. Depending on the TV, this setting could affect all channels, but on many TVs the setting can be different for individual channels or subchannels.

If this is NOT over-the-air TV, it could be your cable or satellite box, or DVD/Blu-ray player.

Dec 17, 2013 | Flat Panel Televisions

1 Answer

I have a Sansui SLED 2280 that I'd like to use without cable input. How do I switch to regular over the air (no cable) antenna? Thanks

To switch from cable to air or vice versa on most Sansui flat screen tv's including the SLED2280, go into the menu. Select "channel" on the screen. Press "enter" on the remote. Select "auto ch mem" on the screen. Press "enter" on remote. Select "signal type" on screen. Press right arrow button or right volume button on remote to change signal type (cable or air). To program channels into tv, select "automatic search" on screen then press "enter" on remote. Wait for search to finish.
I hope this helps you.

Dec 19, 2010 | Sansui Flat Panel Televisions

1 Answer

I have the remote for my 21 inch philips hotel tv but there is no menu on it so i cant search for channels. can someone help me

The menu inthe remote is taken off from the remote control pad as the management does not want clients to keep tuning or change program settings which can result in customers calling for technical help all the time.
So if you are in a hotel just call up room service as they can come over with a regular remote to help? but then if all channels on the cable is seen , what is the need for?

Sep 14, 2010 | Flat Panel Televisions

1 Answer

Re scanning

Updating the Channel List Automatically You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.

2. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

3. Press the ENTER button again, to select "Country".

4. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for Analogue TV is not changed. (Refer to page 11 of the user guide)

5. Press the ▲ or ▼ button again, to select "Auto Store". Press the ENTER button. When it has finished, the number of scanned services will be displayed. The existing favourite channel list will not be deleted when the channel list is updated. To stop the scan before it has finished, press the ENTER button with "STOP" selected.

6. Press the EXIT button to exit. If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed. Check the aerial connection and the try the procedure again.

If the channel and other icons are greyed out and you cannot tune the channels press the TV/DTV button on the remote control unit so that the icon is visible again and not greyed out. This will allow you to tune the TV.

Sep 30, 2009 | Samsung LE37S71 37 in. HD-Ready LCD TV

1 Answer

Element Electronics FLX2211B 22 in. LCD TV will reset every time

I have run into the same problem with a different model (32 inch from Circuit City). You may have found that there is almost no support from the co or web. I do not have an official solution but have some work arounds that have done the job for me.
WA#1 = after a channel scan tune to a HD/digital channel before you turn the set off. You need to do this each time for several times, because the set when turned on to a regular cable or analog station will default to skip all channels. After several times the set should remember your channels.
WA#2 = after a channel scan, go to the skip channel section of the menu, and if your remote has the colored buttons on the bottom scroll through the channels using the red and green (up and down on this menu) buttons. This apparently helps the set remember not to skip your scanned channels.
These are not glamorous solutions but appear to trick the TV into not re-setting the skip function for the channels.
Best of luck.

May 02, 2009 | Element Electronics FLX2211B 22 in. LCD TV

1 Answer

Can't Program Channels In Philips 32HF7544D/27 LCD TV

Firmware update is necessary. It is corrupted.

Jan 22, 2009 | Flat Panel Televisions

2 Answers

Can't advance channels with remote

Hey Guys and Gals I have the solution to your problem. Your channel memory on the remote has been forgotten. Simply navigate through your menu on the remote and rediscover the channels and your issue should be solved. I had the same issue it just took me a little time to figure it out.

BTW if you are hooking up your TV with a direct cable connection in the back without a box, and you go to the menu and do a search for air/cable channels it will even find the channels in between the regular broadcast stations (i.e. between 2 and 3 there is 2.1. which is channel 2 HD and so on for the regular stations that broadcast HD channels). Cheers and good luck the Sharp Aquos is an awesome TV!


Jeff the Sofa King :)

Feb 05, 2008 | Flat Panel Televisions

Not finding what you are looking for?
Sylvania 6615LG 15 in. EDTV-Ready LCD Television Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66537 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Justin Peters

Level 3 Expert

225 Answers

Are you a Sylvania Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides