Question about Sony FD Trinitron WEGA KV-21CL10 21" TV

2 Answers

Tuning Channels wont store above 30

Posted by on

2 Answers

Re: tuning - Sony FD Trinitron WEGA KV-21CL10 21" TV Standard (CRT) Televisions

Frequencies above 30

Posted on Oct 06, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 102 Answers
Re: tuning

Do you mean frequencies above channel 30? Otherwise perhaps the set cannot store more than 30 channels? More info required to be certain.

Posted on Oct 06, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have Universum FT 81804 tv with 11AK19 chassis that wont save channels. I replaced IC Memory chip and it still wont save any channels.

Check whether there is AGC voltage change at the AGC terminal of the tuner, when a channel is tuned. It should change as soon as a channel is tuned. If there is no change in this voltage, make sure that the tuner is faulty.

Sep 20, 2013 | Standard (CRT) Televisions

1 Answer

Tuning problem KV-21CL10

try to setting your tv in menu! and you can see the menu has air cable tv mode then select the ADD or ERASE mode! you select all channels to ADD mode! or you can auto search the program!

Oct 06, 2007 | Sony FD Trinitron WEGA KV-21CL10 21" TV

1 Answer

Hotel TV

check in preset under menu the channels 30 above maybe skip, set this channels to skip off. or just do the auto tuning.

Jun 11, 2009 | Zenith C27A24T 27" TV

1 Answer

I can't program channels above 13

Check your TV settings and be sure to set the tuning mode to cable (sometimes it says CATV). You will find it's set to "air" now. When set for off-the-air tuning, cable channels 2 through 13 work fine, but above that you get nothing. After you set your tuning mode to cable, rescan channels and ou should have everything.

Apr 01, 2009 | Toshiba CF20F40 TV

1 Answer

Retuning channels on prope channel

The retuning process is as follows:

  1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit

For specific model information visit

Oct 26, 2008 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

Tuning problem

Your TV is set to Antenna. You need to go into the menu and change it to Cable. Then do an autoprogram.

Jan 30, 2008 | Symphonic ST419E TV

2 Answers

Zenith wont tune channels

You must get a proper replacement remote control, once you can access the menu and find you cannot store above 13, place another post and i will help you further.

Oct 11, 2007 | Sony FD Trinitron WEGA KV-21CL10 21" TV

1 Answer

Tuning programmes on Toshiba 30HF83 30" TV Problem

Hello Skinno, Frist of all make sure that you are set to Antenna input and then connect your antenna to the TV this will pull in the VHF ansd UHF channels. Then perform the auto channel select. If this does not work perform a manual channel selection this should clear up your situation.

Sep 03, 2007 | Toshiba 30HF83 30" TV

1 Answer

Cant get local channels

If you can manually tune to the channels with no problem, then I would go in and add then into memory manually. If not then exchange the set as it might have a bad tuner or an AGC (automatic gain control) issue.

Apr 18, 2007 | Sharp 25H-M60 TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-21CL10 21" TV Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66409 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides