Line 00 code 400 - Paxar Monarch 9825 Thermal Label Printer

Completely striking out looking for our machine ... or codes

little further research tells me it is DEFINATIVELY not the USA market...
Get your T1303TEFT manual here:

https://www.manualslib.com/manual/644235/Lg-Wft11g00ted.html#manual

For service in your area...

Telephone Call an LG Support Representative at
Jordan
Saturday to Thursday: 8:00 am ~ 7:00 pm
Except national holidays
080022154 (Land line)
065608530 (Mobile / Land line)
Iraq
Saturday to Thursday: 8:00 am ~ 5:00 pm
Except national holidays
80011110
Lebanon
Monday to Saturday: 8:00 am ~ 7:00 pm
Except national holidays
1273
Syria
Saturday to Thursday: 8:00 am ~ 7:00 pm
Except national holidays
0115495400

~~

Sorry didn't SEE that coming Carnac the Magnificent

Errors 001 to 405 and 429 to 435 are data errors. This type of error indicates that incorrect data was sent to the printer, and the printer is ignoring it. Your System Administrator should correct the packet and send it back to the printer. Error 411 is baud rate mismatch. Here's the manual:
http://www.monarch.averydennison.com/support/servdocuments/User_Documentation/9855rfmp/9855rfidoh_aj.pdf

Remove the printer driver from your computer ... get the latest driver that is compatible with your OS, reload and try again ...

Hello,

please try those firmware, seems to be preety recent like for ATA.
http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R209974&SystemID=INS_PNT_PM_1525&servicetag=&os=WLH&osl=en&deviceid=19846&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=32&fileid=295129

Cheers,
Mike
Leave rate if I helped you, thanks!

Have you tried checking your basics ?
Firmware ?
ASPI ?
Disk Defrag ?
IDE location ?
Jumper settings ?
What type of media are you using ?
What programs are you using ?
Exactly where are you and what are you doing when your error occurs.
What are your PC's specs ?
Do you have any Roxio products installed on your PC ?
Please answer ALL of the above - if you don't know, say so, don't make something

Hello there jpd0490.

Here's your geek-steer ...

There are principally two chief causes for this type (calibration) of burn failure:

1. Inadequate quality media (disks). Verbatim is always a solid choice. However, more important than the brand-name disks are sold under, is the actual manufacturer. You can determine this with the aid of a little software tool called "DVD Identifier". There is an entire sub-culture devoted to tracking the best media available, right down to the manufacturing lot level.
2. Drive failing. Since you say that it works consistently otherwise, this option is unlikely.

Good luck, and please do post back ...

• to let me (and interested others) know how things worked out,
• to provide clarification or feedback,
• if you have ANY further questions.

"Today's the best day of my life ... and NOW you're part of it!"
Via-con-Dios and Godspeed -- Geekinator (aka Craig).

YOUR GRAPHICS CARD IS TO SMALL AND IF YOU USING WINDOWS 64BIT DOWNGRADE TO 32 BIT

Kind of sounds that way. They are pretty inexpensive now days, and simple to install.

Good luck

digivox crashed do you have the codes thanx

You unit is faulty.. replace the unit with a new one. The CD Write Laser has probably "Burnt Out" or perhaps the "Quadrant Detector" has faulted.. either way a new unit is only way solve ya problem ... sry :(