Question about Candy AQ130 Front Load Washer

2 Answers

Candy Aquaviva 1000 will not spin completely or empty water

Having put thin rubberbacked rug with woolly tassels in to wash tassels left lumps of fluff everywhere and problem of not spinning off emerged. Tried taking clothes out and spinning without anything and eventually seemed to clear it...not so! Also searched for a filter to clear, woggled pipes around, called plumber (suggest I might need new machine not having looked at it)checked other pipework and connections to undersink, felt it had cleared, but two days later tried washing again and it will not spin all water out. Struggles with a load, even with one item. May have fluff in the system somewhere. Read instruction book, says outlet could be a problem if placed more than 50 cm high but mine set at almost 20 cm higher and always worked at that height. However, when spin did finally clear the original water, the outlet hose was uncoupled and lower, maybe this is what needs to happen. It us 12 years old, dont want to spend much on it therefore. Is slight unbalanced since I moved it, need to adjust feel, but it heavy, me not muscle bound!

Posted by on

  • Anonymous Mar 27, 2009

    candy aqua 1000, with a full load stops mid cycle and seems to struggle to spin again. but keeps trying slowly and after a long period of time finally finishes it, but had to keep turning it on and off. any surgestions please ?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Hope you got your washer fixed by how! This is just another reason for why not to attempt to wash rugs in your washer. The backing broke down and clogged it up. Next time hire a Certified Master rug cleaner!

Stephen "Dusty" Roberts
Certifed Master Rug Cleaner
www.luvarug.com

Posted on Feb 13, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remove the pump, sounds like its blocked up in the tubes happens all the time with mine

Posted on Feb 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, My Candy washer/dryer has stopped working. I get a light on either 1000 or 1400 spin, and a light on 15 minutes and nothing else. There is no water entering the machine.


you may have to take the top off in order to see if the water inlet valve is operating as that's where the water fills from
eric

Dec 29, 2017 | Candy Washing Machines

1 Answer

Kenmore he2t


fluff may have blocked the filter or jammed the drain pump. you need to check these

May 07, 2014 | Washing Machines

1 Answer

My washer will not drain or spin we just had a


hi it will not spin with water in it.have you tried opening the fluff filter ,usually located at the bottom left or right of the machine.once that is clear put the machine on spin or drain to see if the pump is running.if all this is fine check your plumbing is not blocked where the machine empties its water

Jun 25, 2013 | Frigidaire Washing Machines

1 Answer

HI THERE I have a candy aquaviva 800 washing machine and it seems to not want to drain all of a sudden, i have taken out the hose at the back and given a good wiggle and sat with it in a bucket while


Your drain pump is dead. Have a serviceman replace the pump. How old is the unit? If it's old enough that it has the old belt-driven style, have them check to see if the belt is stretched or broken.

Apr 30, 2012 | Washing Machines

1 Answer

Throw rugs are dripping wet after washing. My washer doesn't have just a spin cycle, so I have to rinse and spin. This still doesn't help. Every rug I wash comes out dripping.


The washer is likely detecting an off balance load with only a rug or two. You may want to try and put more rugs or old towles in to offer a counter balance to alleviate off balance condition. Or, you may consider washing the rugs at a commercial facility. They really are hard on the residential machines, especially if they come apart or the backing comes off.

Jan 12, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Hi my washing machine is working but it sletting out alot of water,i think i put a rug in,and the rubber bit at the back all came off and has blocked something,i e filter or sumthing?? i sthere anything...


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

Sep 08, 2010 | Hotpoint Washing Machines

1 Answer

Have a whirlpool duet model GHW9400PLO. Husband put a rug in it and now it shows an F2 error and will not drain. We have tried unplugging the machine, that has worked in the past, but this isn't fixing it.


Hi dear.According to your explanation,it's drain problem(F2 code).Please get access machine filter.Check it for any obstacle(Rug Fluff etc...)clean it & run the machine.It should get back to normal.Also check for any kink in drain hose.If that does not work you may need to replace the pump.I hope that helps.Thanks.

Sep 03, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a Whirlpool thin twin and the agitator is not spinning and makes a humming noise. I washed a small bathroom rug that created an uneven load and this is when the problem started. We removed the top...


I don't have a solution to this but I have almost the exact same problem - washed a runner bathroom rug last night, today it drains but won't spin and I'm having trouble diagnosing further or disassembling... <!-- from fixya rte -->

May 13, 2010 | Washing Machines

Not finding what you are looking for?
Candy AQ130 Front Load Washer Logo

725 people viewed this question

Ask a Question

Usually answered in minutes!

Top Candy Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Candy Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...