Question about ViewSonic VG910S (Black, Silver) 19" LCD Monitor

1 Answer

Viewsonic VG919S 19" LCD

I have thsi viewsonic monitor went it goes on it get to brite then normal then afer 10 second the colors looks to brite on the desktop looks like animated images colors become strong looking like negative or like evrething was drawn with crayon hot brite color drawing it make you blind just by looking at it i dont now if the this kind monitor have hight voltage and that might be damage and over powereing the lcd monitor to give you brite blindnes colors irepir few monitor before but i dont now wich board i have to replace so it can bee good again your help be helpful for me thnks :) Oscar

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers


You must focus to mainboard of LCD monitor find the voltage regulator IC. Voltage test the regulator IC use digital or analog multimeter range 10v dc connect the negative to cold ground, these regulator providing a constant supply of 2.5 - 5v to all IC in the mainboard. check the scalar IC. Because scalar IC will convert analog input signal of Red, Green & Blue. Lastly check the controller board, check the ribbon cable connector from mainboard to
controller board for lose, check the fuse inside controller. I think the exact problem of your monitor could be either the (mainboard) or (LCD panel where the controller board is located).

Posted on Aug 29, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Viewsonic v1930wm

Sounds like the unit needs repair.

Jun 23, 2014 | ViewSonic VX924 19" LCD Monitor

1 Answer

My 19 inch ViewSonic monitor shows red /voilet

Please check the VGA cable at both ends to make sure there are no bent pins and fit into the socket properly at both ends. Also try this monitor with other PC also since it can be in the video card.

Apr 25, 2010 | ViewSonic VX912 19" LCD Monitor

1 Answer

Monitor displays then shuts off

Have you verified the video card in the computer with a different monitor? Does the going to sleep message come up prior th the monitor going dark? The bulbs are ok since you do see a picture for a short time. The voltage swing you see on the power supply is too large. It should always be 12 v + or- 10%.

Mar 28, 2017 | ViewSonic VG900b 19" LCD Monitor

1 Answer

Monitor goes blank coming out of power save mode

I found this on the Internet...

"Press the "Input" button on your LCD monitor's front panel repeatedly at three- or four-second intervals until your monitor wakes up. If your monitor is set to an incorrect input mode, it won't receive a video signal. After you reset the monitor to the proper input mode, it will receive the signal and wake up automatically."

I have provided a Link with more info for you!


How to Get Your LCD Monitor Out of Sleep Mode

Dec 24, 2017 | ViewSonic 19'' 1280x1024 TFT LCD BLACK: 's...

1 Answer

ViewSonc VX924 LCD Monitor

Check the information at Viewsonic's website regarding their warranty:

If you have your proof-of-purchase and it shows the monitor is less than a year old, it would be covered. You would need to follow the procedure on their website to have the unit repaired or replaced, but it would not be your job to try to fix it.

Feb 11, 2009 | ViewSonic VX910 19" LCD Monitor

1 Answer

Dark screen

reset your monitor settings with deafaults with menu.u see some buton on lcd or monitor.

Dec 29, 2008 | ViewSonic VG900 19" Flat Panel LCD Monitor

3 Answers

ViewSonic VE710b 17 inch yellowed photograph look

Check and make sure that there is no speaker, power supply or UPS around your monitor.

Mar 16, 2008 | ViewSonic VE710b 17" Flat Panel LCD...

1 Answer

Viewsonic vx924 19" lcd

use a CRT monitor temporarily while you re-install the drivers for the monitor

Feb 27, 2008 | ViewSonic VX924 19" LCD Monitor

2 Answers

Vx900 viewsonic monitor problem . Blank screen except for power off/on

no, Viewsonic has the part for sale 42.99 - free shipping. Easy to replace

May 25, 2007 | ViewSonic VX900 19" Flat Panel LCD Monitor

Not finding what you are looking for?
ViewSonic VG910S (Black, Silver) 19" LCD Monitor Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18419 Answers

Cindy Wells

Level 3 Expert

5300 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides