It depends what computer you have, and what version of Microsoft you have. for those of you with the Presario SR1650NX computer, here is the Latest driver: Click. For the earlier driver: Click.** to download drivers for you computer go to your computers company website (Gateway, HP, Compaq, Etc.).
**I Recommend downloading the older version first, and if it doesn't work then download the latest.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Be sure to connet the sound card speaker and install sound drivers for the moniter to get it to work you can go to http//www.hp.com select compaq and slect your model to download the correct drivers, also make sure you don't have any speakers muted in the mixer driver by double clicking on the speaker on the lower right hand corner on the lower right hand corner.
Do you have a microphone? If you do, and it is near the speakers, it will echo a lot. Also, check your soundcard settings. If there is an option for room ambience or environment effects, make sure you have them disabled.
the built in speakers on the monitor are only speakers, they are not run through the video signal cable and have to be connected separately.
many monitors with speakers provide a stereo cable in the package but dont tell what the cable is for.
If there is a cable provided there will be a small jack on the monitor that connects to audio out on the sound card.
There may also be a stereo plug combined with the video cable, that likewise connects to audio out.
If the hardware is connected, there may be a volume control on the monitor that may be muted.
If the problem is a recent thing for a system that previously had working sound with this monitor, try the mute on the audio settings
going to seem a dumb Q,
but is the audio cable plugged in, next to vga hp have a separate audio socket, the cable(supplied- 1/8 inch stereo plugs each end) fits between sound card speaker out, and monitor.
Start with the obvious! Are all connections to PC connected? Be sure that the proper wires are connected to the proper plug in.
Next you may have to adjust the volume control thru Windows. Look for the small speaker icon at the bottom right (usually) of the screen. Double click, and be sure that all of the volume controls are "up" and be sure that none of them are "muted"
There also may be a volume control on the monitor, speaker assembly.
hi there, 1st check the connection of cable speakers. then check the volume control, switch it mid range setting. then check the hardware device if there is no conflict with any device. try to reset your system once again and if still same problem, you may have a Speaker problem, maybe the connection inside your monitor with the speaker has a loose connection or some electronics part failure. TY