Question about iLO 2600 Television

1 Answer

Ilo 26hd I have this tv my problem is I can't not change the input source only stay in "COMPONENT" input any ideal what can be the problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 363 Answers
Re: ilo 26hd

- Does this happen even when the source in question is unplugged from the TV? -

Posted on Oct 06, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Ilo-26HD televison problems

most of the new TV's use a SCAT plug to allow connection of a PC or laptop. I doubt that this TV has that sophistication. The ISB will not do it and neither will S VIDEO.

As for the cable you could try a male to male plug to mnake a coaxial connection. These TV's were made to a price for walmart and you got what you paid for which was a cheap TV. There was no warranty offered by Walmart for these either

Please rate my help++++Thanks for using FIXYA

Nov 20, 2009 | iLO 2600 Television

2 Answers

Who is the manufacturer of the ILO 26HD Television?

the manufactured should be on the back of the tv- i have an ilo 27 flat lcd hdtv the name on the back is

Mar 15, 2009 | iLO 2600 Television

1 Answer

ILO 26HD TV: After playing Playstation, the TV

This is the best solution for your problem as a 40 year experience with wires etc. Go to the source of your cable signal connector . Open it and clean the terminals with emery paper , sand the end of the cable shiny clean from corrosion , get a new barrel connectors with gold terminals if possible lengthen the ends of the cable , insert and tighten good, use thick rg-16 or rg 40 cable with good insulation ends crimped professionally with a crimpier or buy ready made , not from dollar store. Get a gold plated professional splitter if you need one or two , it will cost about 15 or more each . Make the cable runs as short as possible, using the thick good cables. If needed get a signal magnifier. From radio shack or the source etc. Connect them good and tight . Ground the splitters . Problem solved , you will get crystal clear channel 2 to 7 including 3 and 4 . Isolate the TV cable from other cables and power wires. Vitally

Feb 22, 2009 | iLO 2600 Television

2 Answers

Ilo 26HD

Well you may have to rescan for cable if you have cable if not then your tv tuner probley went out and the tv does not notice a signal. hope this helps

Sep 24, 2008 | Flat Panel Televisions

1 Answer


The ilo tv 26HD turns off by its self after about 20 min. of being on.

Jun 10, 2008 | iLO V27DMBX Television

2 Answers

Ilo 26hd

Let me guess, you bought this from Walmart?

If you can return it, do so, otherwise the best place to start is to follow the inputs to the board to the screen.

One thing to try is unplug it for 8 hours to hard reset it and see if that makes a difference. These tvs have a history of having this problem and most likely the signal processor is at fault if nothing else looks bad.

Jun 10, 2008 | iLO 2600 Television

1 Answer


Some times the mico locks up and if you unplug the tv and wait a few minutes then plug it back in, it will go to the default ant 1 input

Feb 14, 2008 | iLO 2600 Television

3 Answers

Ilo 26hd lcd tv

I unplugged mine over night and plugged it back in this morning but it still will not turn on. It is still in standby mode

Dec 17, 2007 | iLO 2600 Television

2 Answers

ILO-26HD remote problems

I have the same problem.

Nov 06, 2007 | iLO 2600 Television

3 Answers


Hi! Yes, this is a very common problem for this model of ILO TV. It is due to a problem on the controller board inside the set. I actually bought one of these with the idea of fixing it, and it took 6 months of research to figure out the problem. If you are technically capable, or if you have a TV shop in your area where the set could be disassembled, I might be able to help. Let me know.

Oct 06, 2007 | iLO 2600 Television

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers


Level 3 Expert

6993 Answers

The Knight
The Knight

Level 3 Expert

66463 Answers

Are you an iLO Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides