GENERAL ERROR CODE

Question edited for clarity.

E3 is a generic 'Off Balance' code

If you receive an E3 Error code, your washer may be unbalanced. This could be caused by the washer being too tightly packed, or clothing not distributed evenly. This will usually occur during the spin cycle. Stop the spin cycle.

E3 - Error Code - Stacked Laundry Center - Whirlpool Canada

F8 is taking too long to fill. Check the filter screens on the rear hoses.

The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water. If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive.
Aug 21, 2023

F8 E1 or LF or LO FL Error Code in Display - Washers - Amana

..

Question edited for a lot more clarity and for spelling.
Question moved from Super computers category.

Are you sure it it a refrigerator and a refrigerated AC unit?

Super General AC error code e5 "E5" - Fan Motor Problem: Occurs when the over current from the fan motor is detected. Solution: Verify Power (Voltage/Amps).

Common Portable AC Error Codes - Priority Rental

https://www.google.com/search?q=Super+General+Refrigerator+Error+E5

Question edited for clarity.

How do I fix P2 error in AC?
If the P2 or FL error code is displaying on the air conditioner, remove the drain port cap and tilt the air conditioner to the back so the water runs out of the drain outlet. If no water is draining out when the air conditioner is tilted to the back, the unit will require a repair service.
Dec 11, 2018

More here and videos

https://www.google.com/search?q=super+general+inverter+ac+p2+P2+error+code

..

Error code E3 on a Super General air conditioner model SGSi188-i5 indicates a communication error between the indoor and outdoor units. This could be caused by a faulty control board or a wiring issue.
You may try resetting the air conditioner by turning off the power supply for a few minutes and then turning it back on to see if the error code disappears. If the error code persists, it is recommended to contact a professional technician to diagnose and fix the issue.

Question edited for a bit of clarity.

This doesn't appear to be a General Electric (GE) machine and looks to be an Arabian machine. We are in North America. This link might work better for you in your county.

https://www.google.com/search?q=super+general+automatic+washing+sgw721+e+error+code

..

This is a general "quick reference" fault code list, see further below the list for more ... E6 Outdoor Standard compressor lock overcurrent ... Error Code Definition = Malfunction of power supply or AC input overcurrent

That code is a general location error code. According to what Ive read it has to be on a garage scanner to pin point the exact fault within that general error.

You can find information on the GE microwave F3 error code here
https://appliancerepairinfo.com/ge-general-electric-microwave-error-codes/

Hi Magicard Rio Pro message:
"General Error : Contact technical support, quoting error 24:04".
Somebody help me?