Question about Washing Machines

1 Answer

Hoover Premier 10.1 kg washing machine

On the spin cycle the motor rotates, water is pumped out but the drum is not spinning

Posted by on

  • okkie Oct 08, 2007

    Ido see the motor and belt spinning but the drum does not spin. It would help me if I can get a manual on the machine.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 209 Answers

Do you actually see the motor spinning? or think you hear it, check the belt hasn't come off, or gone slack, it needs to be fairly tight but not too tight, if the belt and pulley go round but the drum doesn't then you have serious damage and need a new inner drum hope i have helped and if i can help more get back to me, i am an appliance engineer of 20 years

Posted on Oct 07, 2007

  • mick d Oct 08, 2007

    this sounds like an internal problem, i think i may have not realised the machine, is this a top loader, if so then there is a fault on the gearbox, best thing to do is ask locally to see if there is an engineer who gives a free repair estimate

    sorry i have not helped, i have tried, hope you get this sorted



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hoover 2305L goes through all cycles well.does not spin fast enough to dry clothes.

how old is the 7 kg washing machine

should be direct drive to the drum not a belt drive

the motor could be wearing out

are you over loading

May 11, 2016 | Hoover Washing Machines

1 Answer

Wash machine - DST10146P Problem - After switch on and without any load in the drum, the kgMODE indicator appear, and the level load indicator starts blink the 10% levels from the mini to the MAX. The LED...

THIS MAY be your defective part!

BE VERY careful handling this switch because it's quite delicate!

1885374 "PRESSURE SWITCH" $89.68

These YOUTUBE video MAY help you!
Here is another YOUTUBE that discusses "Pressure Switches"... and that MAY be your problem. KNOW this is general information and not specific to your Hoover!

Diagnosing Washing Machine Pressure Switch Problems

How to Resolve Pressure Switch Problems in Washing Machine
Hoover and Candy Washing Machine Error Codes


Dynamic Model No DST10146P 80 Product Code 31003253

Another snip-it:
..."Kg MODE Indicator". On Cotton and Synthetic cycles, during the first 4 minutes of the cycle the intelligent sensor will weigh the laundry and adjust the cycle time, water and electricity consumption accordingly. ...

More: The intelligent KG Mode sensor weighs the laundry and adjusts the cycle time, water and electricity consumption to suit the size of the load. This gives you the optimum consumption even if you are only washing one shirt.

The intelligent KG Mode sensor

During the first minutes of the cycle, the "Kg MODE" indicator remain on while the intelligent sensor will weigh the laundry
and adjust the cycle time, water and
electricity consumption accordingly.
• Through every wash phase "Kg MODE"
allows to monitor information on the wash
load in the drum and in the first minutes
of the wash it:
- adjusts the amount of water required;
- determines the length of the wash cycle;
- controls rinsing according to the type of
fabric selected to be washed it;
- adjusts the rhythm of drum rotation for
the type of fabric being washed;
- recognizes
the presence
of lather,
increasing, if necessary, the amount of
water during rinsing;
- adjusts the spin speed according to the
load, thus avoiding any imbalance.


Dec 25, 2017 | Hoover Washing Machines

1 Answer

Blows 6 amp fuse in top panel. On spin cycle runs the pump but motor wont rotate for spin. If left blows fuse again.

Remove the hoses and check the impeller of the pump for an obstruction.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 29, 2009 | Washing Machines

2 Answers

Hoover Commander 7kg (about 9 years old) not working. It does not spin in any wash cycle, although it can be done manually with ease in the 'spin dry' cycle. There was a strong rubber smell before. Any...

I have a Hoover Commander Model 2045LOAUS. The machine washes OK but will not spin (ie pump the water out). Could it be a burnnt out spin solenoid or motor??

Apr 26, 2008 | Hoover Washing Machines

2 Answers

Hoover Vision 1600 drum not spinning?

Have the same problem, different model and it looks like I am outside 5 years spare parts. Probably just a belt or something from overloading. Also looks like it would nearly be cheaper to buy a new machine.You must have checked your pump???? What a rip off

Nov 27, 2006 | Hoover HF7 160E Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

77932 Answers

Brad Brown

Level 3 Expert

16806 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides