No power up on Polaroid Tv Model TLA-01511C

Yellow power save light was on, and I pushed power button to turn tv on and instead of turning green and coming on, the yellow light went off, and tv will not power up at all now. Verified power strip power ok. Is that a reset button hole I see in the back of the tv just below and to the left of the AC Power Plug? Is there a fuse I can get to? I worked in a tv repair shop in 1968-69, but this baby is nothing like those old tvs!!! This tv is also being used as my 2nd computer monitor. Thanks, Mike

5 more comments
rob4ky Nov 01, 2007

I have the same problem with this set TLA-01511C I noticed that if I unplug it for a few minutes it fixes it. I do not notice the tv getting hot so it may not be heat related.
fsubulldogs Nov 08, 2007

I have a polaroid 42 flat screen LCD. I connected my laptop to it, and it worked fine, but then I accidentally hit the power button on my computer and the tv said VGA source off, powering down. Then the TV turned off. Now the red light is on on the tv but when I hit the power button the TV dosen't turn on. Please somebody help.
Anonymous Nov 03, 2008

Any resoloution to this? Any resoloution to this?
Anonymous Nov 03, 2008

Any soloution to this? I have the exact same problem..
Anonymous Jan 01, 2009

Was there ever a solution to the issue above. I have the same problem with a Polaroid 46" HD Widscreen LCD TV model TLA-04841C. I plugged my MAC book into it to watch a movie. Worked fine when in powered down and disconnected my MAC book. Watched TV through the night. Pwred of the TV and then the next day I went to watch it and the red power light the only thing working.
Anonymous Apr 06, 2009

Same problem here. I have a Polaroid 4241-TLXB, I plugged my friend's laptop into the VGA port last week. When I switched resolutions via the laptop, the TV said "VGA source off / Powering down". It turned off (screen went black, blue power-on LED switched to orange standby LED), and now it won't turn back on (the standby LED remains orange when the TV is plugged in). I've kept it unplugged for a day hoping to reset it, to no avail.
pgoings May 07, 2009

I have a Polaroid 4241-TLXB, I plugged my friend's laptop into the VGA port last week. When I switched resolutions via the laptop, the TV said "VGA source off / Powering down". It turned off (screen went black, blue power-on LED switched to orange standby LED), and now it won't turn back on (the standby LED remains orange when the TV is plugged in).

1 Answer

Anonymous

Contributor 1 Answer
Posted on Aug 31, 2008

Anonymous

Contributor

Joined: Aug 31, 2008

Answers

Questions

Helped

1847

Points

When your VGA goes down, try unplugging your tv, then starting it up again. It works for me

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Polaroid Tla-01511B LCD TV goes blank after power up. Power led stays on. I replaced all 1000uf and 470uf 105 degree caps, no luck. What else should I replace?

have you been tried to dis able the supply going to the inverter board for the back light which may have bad parts causing the supply to drop. by the way is there any blinking lights after it turns off? it will tell you the error either in the power supply, inverter board or at the main board.

Read full answer

Nov 02, 2013 • Polaroid TLA-01511C 15 in. LCD Television

0helpful

1answer

Our Polaroid Model TLA-01511C has started sporatic visability. The light seems to go out. You can still see the image very faint in the background. Is there a part (Light) that we can replace that will...

It sounds like your backlight is beginning to fail.

Read full answer

Apr 23, 2011 • Polaroid TLA-01511C 15 in. LCD Television

0helpful

1answer

Polaroid 4011-tlxb. Power to tv and it was turning from red to green light when you press power button but no picture. Pressing any buttons on tv or remote and nothing was happening. Replaced power supply...

if you replaced the supply board then there is issues with the decoder board as you would need to chec kthat and see if its not the issue.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Read full answer

Sep 22, 2009 • Polaroid TLA-04011C 40 in. LCD TV

0helpful

1answer

I have a Polaroid LCD TV model number 4011-tlxb. I have power to Tv and red light is on. When I press power button it turns green and powers up but picture black. When I press any buttons on tv or remote...

blown caps in powe supply they will be domed from venting

Read full answer

Sep 16, 2009 • Polaroid TLA-04011C 40 in. LCD TV

0helpful

2answers

Problems with Polaroid TLA-01511C 15 in. LCD Television

It needs a video board replaced most likely. You can find by searching on google for your model. Might cost more than set is worth. Think about new model as they are really cheap in that small size.

Read full answer

Feb 04, 2018 • Polaroid TLA-01511C 15 in. LCD Television

11helpful

2answers

Screen goes dark after few minutes

check your LCD inverter maybe there is loss connection or some parts damage from inverter.

Read full answer

May 05, 2009 • Polaroid TLA-01511C 15 in. LCD Television

0helpful

1answer

Polaroid TLA-04641C no sound

You should go into the menu SOUND section of your tv. Look for the TV Speaker choice option.
This will have to be turned on to get sound from the tv.

Read full answer

Feb 23, 2009 • Polaroid TLA-01511C 15 in. LCD Television

0answers

Polaroid 15.4" TLA-01511C Broke?

Read full answer

Be the first to answer Nov 03, 2017 • Polaroid TLA-01511C 15 in. LCD Television

0helpful

2answers

Will Not Find A Signal Polaroid HD 15" TV - Model TLA-01511C

same (tla-01911c) issue when trying to watch over the air brodcast try rescanning the channels that normally works for me

i got direct tv basic set on my S-video input so i only need over the air when the sat is down (i.e: storms, wind, snow, ...)

Read full answer

May 15, 2008 • Polaroid TLA-01911C TV

0helpful

3answers

Directv remote

1) Use 2 new AA batteries in RC32 remote control;
2) Slide mode switch to "TV";
3) Press and hold the MUTE and SELECT keys at the same
time until the green light under the selected switch
position flashes twice, then release both keys.
4) Enter 9-9-1-1.
5) Press PWR button on TV.
6) Point the remote at the TV and press CHAN+. Repeatedly press CHAN+ until the TV turns off. Every time CHAN+ is pressed the remote advances to the next code and power is transmitted to the component.
7) Use the CHAN- key to step back a code.
8) When the TV turns off, stop pressing the CHAN+ key. Then, press and release the SELECT key. If the light flashes 3 times before the TV or component responds, you've cycled through all codes and the code you need is not available. You must use the TV remote control.
9) To verify the code, slide the MODE switch to the appropriate position.
10) Press and hold the MUTE and SELECT keys at the same time until the green light under the selected switch position flashes twice, then release both keys.
11) Enter 9-9-0. (The green light under the selected
switch position flashes twice.)
12) To view the first digit in the code, Press and release then number 1 key. Wait three seconds, and count the number of times the green light flashes. Write this number down in the TV owner manual.
13) Press number 2 for the second digit, 3 for the third digit, 4 for the fourth digit and 5 for the final digit.

To control TV volume from Directv RC32:
1. Press and hold the MUTE and SELECT keys until the
green light under the DIRECTV position flashes twice,
then release both keys.
2. Using the number keys, enter 9-9-3. (The green light
will flash twice after the 3.)
3. Press and release the VOL+ key. (The green light
flashes 4 times.)

Read full answer

Feb 11, 2008 • Polaroid TLA-01511C 15 in. LCD Television

Not finding what you are looking for?

View Most Popular

Televison & Video

Polaroid Tla-01511B LCD TV goes blank after power up. Power led stays on. I replaced all 1000uf and 470uf 105 degree caps, no luck. What else should I replace?

Polaroid TLA-01511C 15 in. LCD Television

1,857 views

Ask a Question

Usually answered in minutes!

Check Out the Latest HD Televisions Report

View all Fixya Reports

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

Related Topics:

No power up on Polaroid Tv Model TLA-01511C