Question about Maytag Neptune MAH5500B Front Load Washer
I am attempting to change the door boot on our Maytag Washer. I ordered the part and I'll be damned if I am going to pay someone hundreds of dollars to come and put a rubber on my washer. I need step by step instructions in total idiot proof, layman's terms. Help! Thanks!
First take off old one, watching carefully how it came off ,some machines you can take front off,remove front wire on boot there is a other one inside problemably a spring type you may need a other person to help you put it on its trial and error realy go for it get back to me if you have a problem its not that easy iam at it 30 years good luck IRE close 0872465395 free advice
Posted on Nov 24, 2007
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Maytag Neptune Door Boot Change
Remove 2 screws holding door hinge to cabinet and remove door. Then
remove 2 screws opposite these. Grab front panel with thumbs at area of
screws you removed and pull outward with thumbs. Panel will pivot
forward. Remove panel from lower clips. At top of exposed area remove
2 5/16 screws. Remove brackets under them.
Open dispenser and remove 4 screws. Careful not to drop in dispenser. Remove dispenser frame assembly.
You can now raise top of washer to a 90 degree position.
Now back to front exposed area. Grab boot where it contacts front and peel out of groove. Also remove two screws holding light assembly and remove cover. Remove all 5/16 screws holding front assembly and the ones on top area where it is on a bevel. Remove front assembly by folding up and onto top.
Now we are at the boot. Remove spring and wire assembly holding boot to drum. Make note on boot position and spring position. Remove boot. Install new boot onto drum. wrap wire around drum with ends at top. Now the fun! Hook spring to on end of wire and using vise-grips, pull to other end to hook into wire. It can be done, honest.
Now just reverse to reassemble. should be instructions with boot. Good luck!
Posted on Oct 21, 2007
Tips for a great answer:
Apr 05, 2010 | Maytag EPIC MFW9700S Front Load Washer
Dec 29, 2009 | Maytag EPIC MFW9700S Front Load Washer
Nov 28, 2009 | Maytag MAH6500 Neptune Front Loading...
Oct 07, 2009 | Maytag Neptune MAH6500A Front Load Washer
Mar 20, 2009 | Maytag Neptune MAH5500B Front Load Washer
Nov 17, 2008 | Maytag 24 in. MDB3700 Built-in Dishwasher
Oct 05, 2007 | Maytag Neptune MAH5500B Front Load Washer
Sep 05, 2007 | Maytag Neptune MAH5500B Front Load Washer
285 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: