Question about Projection Televisions

3 Answers

Need answers my dukane image pro projector is blinking red lights for temp and lamp whats does it mean

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers
Re: need answers

The fan may have went bad. If it's out of warranty you may open it up and try and blow some dust out of the fan to see it that may do the trick if not it may need to be replaced.

Posted on Aug 17, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: need answers

When Hitachi UltraVision TV is turn on, the Power, Temp and Lamp lights will turn ON, blink a few seconds and then Power and Temp lights will go OFF. No picture and No Sound..blank screen. Any solution?

Posted on Jun 18, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: need answers

I turned on my hitachi this morning and all i get is the power light and the two red lights flashing really fast

Posted on Dec 23, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

The lamp light is blinking once every 5 seconds. The manual says that " Lamp will not light or light is abnormal"


Panasonic PT50LC13 lamp indicator blinks to tell you the lamp is faulty.

You need to replace the bulb or TY-LA1000 lamp assembly. This link displays all Panasonic TV Lamps and TV Bulbs. This page shows Panasonic lamp location and How to Replace TYLA1000 bulb. TY-LA1000 Bulb Replacement requires the use of a long Philips Screwdriver to reach screws within the lamp cage.

Unplug AC power before removing the lamp and re-install all doors, etc, correctly before starting the TV. Vacuum any visible dust or lint from air vents and lamp area. Do not used forced air to blow out dust, big problems may result.

The user's manual has a description of what the Blinking LED indicators mean.

Image of TYLA1000 lamp.


Apr 14, 2011 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

Shuts off

probably needs a new lamp.

Sep 13, 2009 | Projection Televisions

1 Answer

My infocus IN1 projector won't turn on anymore.

It may be the lamp is out. Normally a projector will try & fire the lamp 3-5 times then shut down with a different color light like amber or red. If the lamp doesn't light then it could be the lamp or perhaps the lamp ballast that starts the lamp has failed. A stuck fan also causes similar symptoms. There's 2-4 fans in the projector if one is stuck or bad it will turn off within 5 seconds or so after the lamp lights.
Does your lamp light at all? Are the lights a different color after it shuts down? Answers to these questions help figure out what's wrong though it's impossible to say for sure without looking at it. I service almost all Infocus projectors if you would like a quote please reply with your email address or write me at
Good Luck,

Jul 24, 2009 | InFocus Projection Televisions

1 Answer

KF-50WE620 Green light blinks (no image) lamp light blinks red

Your owner's manual for the television will contain a troubleshooting section that will describe the blinking codes for the various lights, and what they mean.
However, in your case, it probably means the light is burned out.
The bulb on my TV tends to burn out about every 16 months (I watch TV for many hours per day, so your experience may be different). If your TV is still under warranty, I would suggest you contact the store where it was purchased, or contact the manufacturer.

Jun 20, 2009 | Sony Grand WEGA KF50WE620 Television

1 Answer

No sound no picture

The temp light blinking means that the fan is not running. The lamp light blinking means that the lamp door os not secure. Check to be sure that all access doors are closed properly. There are safety interlocks to prevent the set from powering up if all doors are not properly closed. Did you replace the lamp recently? Re-open the access door and be sure that it is closed completely and straight.

Let me know if you have further problems.


Jan 14, 2009 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

My Panasonic PT- 50LC13 doesn't turn on

Your service manual on page 82 steps you through decoding the blinking
1) there are two lights on the front near the reciever of the remote signals (Temp indicator and Lamp Indicator)
2) If the Temp indicator is on then they recommend you contact a service center
3) If the Lamp indicator is on and the power light stays on (no blinking) then you need to replace the lamp. Otherwise it says to contact the service center.
4) Counting blinks with the lamp indicator (1 every 5sec - lamp will not light or is abnormal, 2 every 5sec - lamp voltage is abnormal, 3 every 5sec - lamp temp is too high, 4 every 5sec - other error)

Apr 26, 2008 | Panasonic PT-50LC13 50" Rear Projection...

3 Answers

Tv keeps turning off?

cutta, you will most often hear a click on boot then the fans start up and lamp will then fire. The picture will start to show what point does it shut off? and do you hear a click when the tv is turning off? Is it the complete tv shutting down, fans and everything that turns off? Do you see any lights on the the front panel "POWER", "STATUS" or "LAMP", what are they doing? If you see a Power, Status or Lamp light after it shuts off the below are what they mean if there is an issue. POWER - STATUS - LAMP - CONDITION/ISSUE: Off - Yellow - Off - Temp. high/dirty filter/excess room temp Off - Off - Yellow - 4000 hrs. Lamp usage warning Off - Off - Blink Yellow - Lamp Cover open Off - Blink Yellow - Off - Air Filter Cover open Off - Off - Red - Lamp failure (failed to turn On or broken) Off - Blink Red - Off - Fan Has Stopped Off - Red - Off - Circuit failure (short) or DVI cable disconnected If you want to check for the last "Error Code", after you first turn the TV on, by pressing the front panel ?DEVICE? and ?MENU? buttons at the same time and holding them for 5 seconds, it activates the Error Code Mode. The ?Power LED Light? blinks/flashes (1/2 sec delay) and then flashes again denoting a two digit Error Code indicating no problem or an error has occured since the last Initalization. i.e. "Power light" blinks 3 times (1/2 second delay) and then blinks 4 times then 1 sec delay and repeats a few times. This would mean "Error 34 - Lamp abnormality". See below for error codes..... Error Code - Description or issue 12 - No Error detected, check Power Supply 32 - Lamp Cover is open 33 - Air Filter Cover is open 34 - Lamp abnormality 36 - Light Engine (DMD or LAMP Fan stopped) 37 - Exhaust or Lamp Ballast Fan stopped 38 - Lamp temperature high 39 - DMD temperature high 41 - Short is detected 44 - DVI cable between FMT & Engine disconnected. Sorry for the long answer but it was an open ended question.

Jul 11, 2007 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

774 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

57068 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides