Question about Phones

2 Answers

Cardo scala rider operators manual

I have the above unit fixes to a motorcycle helmet so you can bluetooth phone call on the move...problem i have lost the opperators manual,so dont know how to turn it on etc could you help please ..Regatds Brian

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Cardo scala rider operators manual

The ususal way to turn on a scala rider headset is to hold the symbol fo rabout 5 seconds then hold just behind the symbol for another 5 sec's untill the light blinks red and blue then it will be able to link to your phone for the first time. if it links automatically or you have already linked it then just let it do its thing near the back you will find a sectioned off aread and in the center it will have a raised button that is the talk / answer / redial button just forward of that there is a button (the one that you held to make it blink red and blue) that is the voice dial button the icon itself is just for on/off the two raised areas on the back next to the charge port are the volume buttons up/down respectively

Posted on May 24, 2008

Re: Cardo scala rider operators manual

Dear waltersaf, I have 2 scala rider but not from 1 box ( they was bay in different time).
Please help me and answer haw to pair this 2 divaices?


Posted on Aug 12, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When cold the bike is hard to start, when hot , no problem. When i installed cams,I also went from 20x50 oil to 20x60. I read in the service manual that this could be causing the problem

There is no need to go to a heavier oil, Harley 20/50 is more than sufficient for these bikes. The only time i would recommend changing the kind of oil is to synthetic. be it ams oil or syn3 only upon that your get caught in traffic a lot or are a "cam rider" as they call it. personally i am a cam rider, i am always on the power band on my 2006 flstfi with 103" engine and Harley 257 cams. only in early evo and shovel head engines do you change the weight of the oil due to temperature changes hotter out use 60 weight colder use 50. just for easy starts and no leaks.

Dec 24, 2010 | Harley Davidson Harley-Davidson Motorcycle...

1 Answer

My cordless phones crackle

Do you know what frequency the phones operate on? Many devices can interfere with cordless phone signals, including wireless routers, Bluetooth devices, and even microwaves.

Try moving the phones away from any of these devices and see if that helps. If you use DSL for your Internet service, make sure you have placed filters on all of the phone lines that don't go to the DSL modem.

Aug 09, 2010 | AT&T 650530003417 Cordless Phone

1 Answer

I want another station to ring in addition to the operator's. It will ring at one station, but I would rather have it ring at another. It was ringing at the station I want, but doesn't now. I did move the...

Moving the phones shouldnt have affected the ringing. Phones are programmed on the ports which usually doesnt follow the phones if moving them. You will how ever have to program the ringing again on your system. To do this you will need the model number of your system StrataVI6e, DKT 40, DKT424,CTX, ETC... I have a site below with manuals on all Toshiba systems. However if you do know your system you can message me back and i will setup the steps to program your particular system.

Feb 25, 2010 | Toshiba EKT 6010 S Corded Phone

1 Answer

Manual for ntl d5000 cordless phone

you can turn on the bluetooth on your phone in discovery mode.
then on the SYN1716B press the little round button above the power switch and it the pass code is 0000 this should work I just did it. Manuals can be found at

Sep 02, 2009 | NTL Phones

1 Answer

Bluetooth problem

As you said your cellphone giving error of bluetooth operation faild i'll recommend you to Turn it off then On . If this does not work then you are suggested to get you cellphone software reistalled so that may fix other problem if there are any including the bluetooth error.

Aug 15, 2009 | Phones

1 Answer

Phone will not ring

It's RINGING now! I followed the Set Programming instruction in our manual. It's in Configuration 3-21. It's a very old old Operator guide.
I am trying to find it online. In the mean time you can use the M7208 Phone Adminitration Overlay over the keys and program your phone by pressing Feature **266344
Here is a link to the overlay
Good Luck.

Nov 19, 2008 | NorStar M7208 Corded Phone

7 Answers

Motorola E815 has been paired with VRBT300V Bluetooth

I just bought this unit today at Costco.  I read a post on yahoo that said to make sure that you hold the on button long enough to see the blue and red lights flashing.  Once I did that my cell phone had no problems finding the unit.

Jun 29, 2008 | Phones

Not finding what you are looking for?
Phones Logo

Related Topics:

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts


Level 3 Expert

93861 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4720 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides