? TV channel to use Panasonic PV_7460

You need to clean the video head. With these types of sets it's best to use a tape cleaning cassette. I should get a Scotch Head Cleaner Plus tape currently on sale on Amazon for around 4 pounds.

If you are using an antenna put your antenna connector into the rear of the VCR & then using a connecting cable (RF flylead), take this fron the other socket at the rear of the VCR & connect this to the antenna connector on the TV, you will then have to tune the TV to the VCR. Select channel zero for example on the TV, insert & play a tape, & then tune the TV in until it picks up the video playback picture then store this channel on the TV settings. Alternatly, do as above only use a Scart cable & connect this from the rear of the VCR to the AV connection on the rear of the TV, then when you wish to use the VCR channel, select the AV option on the TV.

Change the motor belt charge

Most VCRs use the channel Up and Down buttons for the tracking

Problem Solved:

Take your connector with the 3 colors red,white & yellow and plug into VCR OUT. The other end (w/ 3 plugs) goes into the INPUT on the back of the TV. Next insert a VHS Tape & search the TV for input or a channel below #2 for Cable#1,2,3 or AUV Channel.

In this case; Channel AUX #1
Shows / Plays Video w/ clear sound & picture.

Yahoo.

I don't recognize your first problem.  The "light to dark" issue I believe is intentionally engineered (mine does it too); it prevents recording DVDs on to tape.  Try running the DVD player directly to the TV.  Radio Shack used to have a box that would correct this issue too, you might check there.

T. R.

This problem is undoubtably dirty or worn video heads. Try using a good quality head cleaning tape. If this fails, re-post, and I will explain how to clean heads by hand.

Dave Duff

All tapes do this, or only ones made on this machine?...accordianman

if u stick ur bowo in it then it should do the job

check the tip in my profile