Question about GE Profile Harmony DPGT750EC Electric Dryer

1 Answer

Son Threw in a VERY Wet Baseball Uniform - Dryer Now Not Working

My 11 year old son tossed in his dripping wet uniform into the dryer and it soon stopped working. Their was enough water to puddle in the dryer's tumbler. Now... The panel will not turn on when I press buttons, no beeps - nothing. I checked the circuit breaker for the electrical outlet and it did not trip. I reset it anyway, but still nothing. Is their a breaker on the dryer? Any ideas? Thanks in advance, Frank

Posted by on

  • cannonfl Oct 04, 2007

    Can you let me know where the fuse is located?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 790 Answers

Ok check the fuse inside the unit! that is attached in the wire you can see the fuse there! if blown replace a new one! then observe the unit!

Posted on Oct 03, 2007

  • carlos fernandez Jr.
    carlos fernandez Jr. Oct 05, 2007

    the fuse is located at the wire! the fuse is attached in the wire! or maybe near in the motor or in the mother board...



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Re Bravos Maytag not spinning well at all on last spin cycle....clothes are dripping wet and need to be wrung out before tossing in dryer

Your description of your problem tells me that either your pump has stopped working or the pumps belt is broken or slipping on the pulley which will do the same thing , not pump water. Check your belt for wear and turn pump pulley by hand to see if pump is seized up. Good Luck Friend.

Jan 29, 2018 | Maytag Washing Machines

1 Answer

Remove lipgloss from school uniform that was put through dryer

go to this link and on the page if gives lots of ways to get it off... Remove lip gloss from school uniform Google Search

Oct 24, 2017 | Dryers

1 Answer


How to check a dryer like yours with a heat problem. My home video of a Roper/Amana/Whirlpool dryer:

Oct 01, 2012 | Amana NGD5200TQ Dryer

4 Answers

Is it possible to dry out tv if it gets wet

I dropped a little amount of water In the back not very much at all an I am scared to try an turn it back on

Mar 01, 2011 | Emerson Televison & Video

1 Answer tumble dryer was working perfect until my son decided to put soaking wet washing into it....and i mean soaking the drum doesnt turn but the heat still comes out....please help as...

did the belt come off due to heavy load? if it is still n and didnt blow a breaker it may have blew the motor, you would have to take the back off to inspect, dont forget to unplug first

Jan 18, 2011 | Dryers

1 Answer

Wet and cold clothes after cycle

Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat


May 31, 2010 | Kenmore 72062 Gas Dryer

1 Answer

The dryer will not come on at all..


There can be many reasons why your dryer2_bing.gif will not turn...

This tip that I wrote will help you to figure out what is happening...


May 01, 2010 | Dryers

1 Answer

My son overloaded the dryer will too-wet clothing. Now the dryer won't started when I push the button. Something smelled a bit burnt. A belt? Something else?

your drum has missaligned. push the front of the drum up back into its grove. The smell you are smelling is the belt. If you are unable to fix it by pushing it up then you will have to remove the front of the dryer and I would replace the belt and the slides

Aug 15, 2009 | Maytag Dryers

1 Answer

Son put load of wet towels in dryer comes on, tub won't spin


Nov 11, 2008 | Kenmore 659 Electric Dryer

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Dave Harrison

Level 2 Expert

114 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers


Level 3 Expert

1211 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides