Question about RCA HDLP50W151 50" Rear Projection HDTV

1 Answer

Bright flashes on tv

I get bright flashes on screen after tv has been on for awhile, happens with all inputs.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I had this a couple of years ago. I assumed that it was the color wheel going out. I am handy with these things so I removed the color wheel and cleaned it very carefully.(it is glass) and then gave one tiny drop of oil in the bearings. Seemed to work for me. Not a job for someone not comfortable with electronics. There are replacement wheels on the internet and are not that hard to replace. Remove the rear lower cover and unscrew 2 screws and 1 connector.  Hope this helps

Posted on Oct 30, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG 47LB5900 TV picture blinks on and off. sound ok, does it on all menus, not just content.


T con board is responsible for the final image that appears on set. If there are anomalies or issues with it they can be traced to that board.

Aug 25, 2017 | LG Televison & Video

1 Answer

The tv has a black screen with the green light flashing like mad, will not turn on?


Evening there
Check the scart plugs and cables. There might be inputs for sound and brightness. Look at the back of the TV to check for input and output.
good luck
Kolbrun

Feb 16, 2012 | Televison & Video

1 Answer

My Coby LEDTV 1926 blinks red, green, blue, white, and black. Is there anyway to fix this?


Sorry I can't help, but mine does the same thing sometimes. It'll work fine for awhile, then no picture, but goes crazy and flashes one color at a time across the whole display, very brightly. I have it connected to RCA inputs, so I don't know if it would happen using the antenna input, but based on your experience, I suspect it would. I never got around to calling tech support, and my return period ends in two days, so it's going back to the store tomorrow.

Oct 30, 2011 | Coby Televison & Video

1 Answer

Ln55c650 keeps flashing bright to dim very fast after about 30 minutes of being on if i shut it off for a few minutes it goes away til about 30 minutes the picture never goes away just gets bright and dim...


I had the same issue occur on my ln55c650 (screen flickering, not the actual image but the front lights flashed which was too distracting) and they had to replace the power supply pc-board. Seems some issue with power module in the TV rather than the side panels. Luckily for me, TV was still in warranty.

Jul 22, 2011 | Samsung LN55C650 TV

1 Answer

Insignia NS-LCD26-09 TV Screen Bright


Hello,
I am wondering if this happens with every source input. Please compare the Video, YUV, and Ant inputs. This will tell you if the issue is related to a specific curcuit.

Jan 05, 2010 | Insignia LCDTV26 26 in. Television

1 Answer

TV PICTURE GOES OUT AND THEN SHUTS OFF


sounds like dodgy buffer board or video pcb

Sep 25, 2009 | Televison & Video

2 Answers

Acer LCD Monitor AL2671W - screen too bright!


I had the same problem with my TV when I purchased it used. Select the input you are having troubles with and enter "Service Mode" by pressing and holding the "VOL - " button and "CHAN + " buttons on the TV, simultaneously until the screen flashes red one time.

At this point you will be in service mode. Pressing the "MENU" button will open a service menu, which is different from the typical user menu. From the service menu you can further adjust your image settings until you have a decent picture.

Initially my VGA input looked terribly bright and washed out. Now it looks incredible!


Mar 04, 2008 | Acer AL2671W 26 in. LCD Television

5 Answers

No picture but has sound


My LG TV
switch on no picture but short period of sound then nothing

Jan 20, 2008 | Sony KP-51HW40 51" Rear Projection...

Not finding what you are looking for?
RCA HDLP50W151 50" Rear Projection HDTV Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75767 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...