Question about Durabrand DU1301 TV

3 Answers

Remote Control The original remote that came with the TV was destroyed. I have bought 4 different universal remote's to replace it. The code's that are given for Durabrand, doesn't give hardly any functionability to the universal remote. This TV is in my bedroom, which is split from the cable box in the living room. Does that have something to do with the functionability of the universal remote? Or is there another code that I can use for maximum functionability? Or can I get a replacement remote control (duplicate to the original)?

Posted by on

  • 2 more comments 
  • peach55 Nov 03, 2007

    Remote stopped working. How do I get a replacement?

  • Ded Moroz Dec 12, 2007

    Hello,

    I have the exact same problem! Is there anyone swho found the remote to it? I called Higher America, and they said they stopped producing this model and parts for this model. It's not even THAT old, mine was manufactured in Feb.05. HELP!

  • Anonymous Dec 22, 2007

    I have the same problem, with the universal remote. My universal doesn 't have the name brand Durabrand on it so there is no code configuring number for it. Will the remote operate under a different name or code.

  • Anonymous Feb 11, 2008

    SAME PROBLEM, REMOTE CHANEL CHANGE ONLY GOES TO 9 AND WON-T ADVAVANCE ON THE CHANEL BUTTON.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I was struggling with how to solve this problem for two weeks. And finaly discovered www.remotes.com These guys are the best, I got my remote in the mail, works PERFECT. My husband and I totaly thought we lost any hope to find one, since this model of TVs is not produced anymore.

Posted on Dec 25, 2007

Ad

I have the Durabrand 1301, and the Emerson code 092 worked for a Brookstone EXTRA LARGE tv remote. Maybe this code will work for you.

Posted on Dec 25, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 48 Answers

Sorry to say but it is very hard to get parts for this brand. I don't take them for repair anymore. I have a few Duraband remotes. If you can give me the model number of yours, maybe I have a matching one for you.

Posted on Oct 03, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need sansui 076k0ut011 led tv remote codes to program an rca tv


reset sansui tv remote control 076k0ut011 Questions ... - Fixya

www.fixya.com > Forum > Tags
...your help in advance. need code for a one for all URC-2060B06 sansui tv try these ... ...sansui tv with a RCA 704 remote control I have sansui tv and a RCA 704 remote ... URC-3021 Remote Control: How do i program this remote to a sansui tv? ... TV Remote Controls Sansui Remote eBay NEW Orion Sansui JVC LED TV ...

reset sansui tv remote control 076k0ut011 Flat Panel ... - Fixya

www.fixya.com > ... > Tags > reset sansui tv remote control 076k0ut011
Flat Panel Televisions reset sansui tv remote control 076k0ut011 questions and answers. ... ...sansui tv to program rca remote to it model # HDLCD1955C need tv code for this model ... Question about Contex 39-inch 1080p LED TV LE39D3.

Original Sansui - Orion TV Remote Control 076K0UT011 ...

? 1:00
https://www.youtube.com/watch?v=mPbRsUI0xnk
Dec 21, 2012 - Uploaded by ElectronicAdventure
Original Sansui - Orion TV Remote Control 076K0UT011 - Save $5 with ... have the New Original Remote ...

[PDF]Operating Instructions For 4-Function Cable



Dec 16, 2015 | RCA Televison & Video

2 Answers

I have an etec model # 40A99 40' flat screen tv with no remote. ive tried programming several different universal remote controls and the only thing it will do is turn tv off and on and volum


This TV will work properly with its original remote control only. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

Dec 14, 2014 | Universal Televison & Video

1 Answer

I bought my 19" Proscan LCD (19LA25Q) used from a


The Proscan 19LA25Q came with a remote originally. Unless the IR receiver has failed, it should work with a universal remote. (Note: if the TV is newer than the remote (or released less than 6 months before the remote was programmed), the remote codes for your TV may not be included.) Since the code lists on universal remotes do vary depending on the age and model, please give more information than just the brand. GE remotes usually have a version code label in the battery compartment. This version code is needed to look up the correct code lists. Some GE universal remote built by Jasco codes are here: https://byjasco.com/support/ge-universal-remote-codes.

The Proscan 19LA25Q was probably built in 2007, since there are reviews from 2007. That was also the year when this size TV had to have an ATSC tuner. So if your remotes were programmed before July 2007, they may not be compatible. Some of the current Proscan TVs probably use the same parts as some Sylvania, RCA and Curtis TVs.The 19LA25Q was warranted by On Corporation which has control of the RCA brand now. However, I don't know when they bought the label.

Amazon lists a few direct replacement remotes for the 19LA25Q. See https://www.amazon.com/Original-Proscan-Control-E20F-19LA25Q/dp/B00KQVDRNK and https://www.amazon.com/PROSCAN-Replacement-Remote-Control-19LA25Q/dp/B009H5QVIO . Remotes.com also has a replacement remote: http://www.remotes.com/SearchResults.asp?Search=19LA25Q .

I hope this helps.

Cindy Wells

Apr 21, 2017 | Proscan 19LA25Q 19 in. LCD Television

1 Answer

Remote control switch destroyed


If you get an universal remote, you won't have all functions to control the TV. Moreover, the codes for many audiovox model are often not reported on universal remote manuals , therefore you may need to use autodetect feature on universal remote.

The best choice is buying a replacement original remote like the ones below:

New Original TruTech PLV31199S1 Remote Control

$39.95 -

New Original Trutech PLV31199S1 Remote Control $39.95

Apr 18, 2009 | Audiovox PLV31199S1 19 in. LCD TV

1 Answer

Looking for a remote control


Can't help with replacing original remote, but if you get a universal remote, you can look for the programming code here: http://www.remotecentral.com/

Instructions with universal remote will say how to program, then look up the code in the booklet that comes with it, or try the above site to get the 3 or 4 digit code to program it to work.

Apr 06, 2009 | Durabrand Televison & Video

2 Answers

UMC J20/1U12G Set - Need Remote Control Code


i bought a ross remote control as i lost mines while i was moving houses & it works fine but when he batteriies ran out it resets its self & now i dont have the code to out in bk it for the remote towork again

Nov 24, 2008 | Televison & Video

1 Answer

Tv won't recognize remote codes


If the manufacturer of the universal remote cannot give you codes for the Symphonic you are out of luck. U will either have to get an original replacement or get a Harmony universal remote.

Jun 25, 2017 | Universal Remote Control Remote Control

4 Answers

Akai 32" LCD TV/DVD Combo- universal remote


just replace the infrared diode of your remote control in you dont know how to do that..ask the tecnician to change in infrered diode in your remote control

Feb 04, 2008 | Akai LCT3201AD 32 in. LCD Television

1 Answer

Remote Control


Re-search this forum, I posted a fix using a DirectTV remote in another thread. Happy hunting! :)

Dec 16, 2007 | Durabrand BH1304D 13" TV

Not finding what you are looking for?
Durabrand DU1301 TV Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Durabrand Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75178 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Durabrand Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...