Question about Sharp Standard (CRT) Televisions

1 Answer

20" Sharp LCD TV

My flat screen is just a year old and is now "arcing" for lack of a better word. Sort of a quick random static. It is on a counter in kitchen, on a pedastal, with a 3" space below the cabinet above it. This TV replaced a 14" Sylvania flatscreen that simply went to black after 1 year. The quote to repair was almost as much as I paid for it. Help!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: 20" Sharp LCD TV

What type of Universal Remote Control can I purchase for a ZENITH Concierge, Model H2735DT, TV?
Please supply brands and model or serial numbers of remote types.
Thank You,
Ken Ducre

Posted on Oct 04, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a 32SC260 Sharp Standard Definition TV. It has a great picture when playing a DVD and on a couple of channels, but other channels are somewhat static and have a faint thick vertical that constantly...

Verticals through the picture often denote that other televisions in the house or area are effecting your viewing. The only way that can take place is if your signal is too weak to overcome it. It is not your TV but as you've suspected, a lack of quality signal. Call your cable provider for a service tech to sort out a solution. You could take the set over to another friends and prove the TV is OK.

Dec 05, 2010 | Sharp 32SC260 32 inch TV

1 Answer

My Sony trinitron tube Tv 36" seems to be going (its 10 years old

no ....the tube will end up after 20 yrs in 10 yr old sony...
it is worth if u fix it. randomly going black means...horizontal driver trans former is the problem..or any loose contact with the 110 volt supply to that transformer,,or any loose contact with line o/p transformer.. (horizontal driver transformer may be gone
then tv behaves like this) if any other parts gone tv wont come back.... there may be a loose contact call a service pro..

Apr 02, 2010 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

Static noise and blurry screen

You need to take your TV set to Service Center, because the inner parts, especially the flyback transformer, been damaged or worse, the connector broken, that's why you can hear the noise.

Mar 07, 2010 | Symphonic ST420FF 20" TV

1 Answer

Magnavox 20MT4405/17 Error and remote control problem

what you describe sounds like you have a short inside the safe bet is take it to a repair shop.

Oct 05, 2009 | Philips Magnavox 20MS233S 20" TV

1 Answer

Picture on tv screen is smaller & concave on all four sides compared to the edge of the screen.

well just tube only has 80 tos hours on thes eok time for new tv lcd sharp samsung are best on market for pcie plamsa tvs also nice in those 2 brands i would say time t o upgrade u love it those parts not avb anymore u will have hell of time fixing it if i can fid u parts on top of it new lcd flats so much more cleaner better and save 500 watts a day pays itself ok

Oct 06, 2008 | Sony KV-36FS12 36" TV

1 Answer

Blurred picture with lot of static

This model has a chronic problem with the crt socket arcing and causing this problem. The only true fix is to replace the crt socket locate on the small bd. that plugs on the back of your picture tube. You can however have some success by locating the focus control on the flyback transformer and slighly adjusting it until the unit stops arcing. If you are not familiar with high voltage safety then please have a qualified service tech perform this repair.

Jan 28, 2008 | Emerson EWF2004 20" TV

1 Answer

Static 'white' sound

Good day.
Try to remove the cover of your unit and clean the tube with a dry cloth. try to look for the anode cap. the one tht is connected to your tube if there are holes in it. This causes the problem.

response is highly appreciated,


Nov 21, 2007 | Sharp 32F-830 32" TV

1 Answer

Sylvania 27 inch stereo flat screen tv

This problem sounds like a short inside the picture tube itself unless a driver transistor failed that drives the red gun in the CRT. You may have to take it to an authorized repair facility if the picture tube is still in warranty.

Nov 10, 2007 | Sylvania 6427FF TV

1 Answer

Emerson tv powersurges

where or what location did you check the voltage at??? Need more info and what do you mean static problem because static on the front of a tv sctreen is normal. and gets worse when you have forced air heat. need more info please.

May 08, 2006 | Emerson EWF2704 TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66518 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Cindy Wells

Level 3 Expert

4721 Answers

Are you a Sharp Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides