Question about Jabra BT150 Wireless Headset

1 Answer

Jabra connection

I got my new phone and the Jabra it connected at once when I got it. I quit using the bluetooth for a while, now I want to use it again. My husband has the same set up his works, mine doesnt. i deleted it from my phone thinking that would recreate a new connection. not. I need to set it up again so I can use the bluetooth. thank you

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers
Re: Jabra connection

You use your Jabra BT150, you need to pair it with your mobile phone. 1. Put the headset in pairing2 mode Make sure that the headset is on. Press the answer/end button and press the volume up (+) button at the same time, until a solid blue light comes on. 2. Set your Bluetooth phone to ediscoverf the Jabra BT150 Follow your phonefs instruction guide. This usually involves going to a esetup,f econnectf or eBluetoothf menu on your phone and selecting the option to ediscoverf or eaddf a Bluetooth device.* (See example from a typical mobile phone in fig. 4) 3. Your phone will find the Jabra BT150 Your phone then asks if you want to pair with it. Accept by pressing eYesf or eOKf on the phone and confirm with the passkey or PIN3 = 0000 (4 zeros). Your phone will confirm when pairing is complete. In case of unsuccessful pairing

Posted on Feb 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to connect to phone

Depending on the phone, you need to enable bluetooth. then according to the directions on the Jabra, set it to "pairing" mode. Use the phone in the bluetooth menu to "find devices". Once it finds the Jabra you should need to enter a code to "pair" it, should be 0000 ( all zero's). Once paired, it should connect each time you turn the headset on.

Dec 31, 2010 | Jabra SP5050 Bluetooth Headset

1 Answer

How to disconnect bluetooth headset from a lost phone

I bought a Jabra Bluetooth headset, It worked fine with my phone(nokia). I lost my phone now. Now i want to use the same headset with my new phone (huawi), but i am unable to connect it to my new phone as the phone is already paired with my previous phone. So please help me with the issue and tell me is there any way i can disconnect the bluetooth headset from my previous phone??

Jun 04, 2009 | Jabra BT125 Headset

3 Answers

How to hook up a Jabra BT350 bluetooth

Make sure your cell phone's bluetooth is activated. Once you do that, you should be able to hold down the main button on the Jabra and once it turns on, it will connect with your phone.

Also, go to this site for Jabra. It links directly to the manual.

Jun 22, 2008 | Jabra BT350 Bluetooth Headset Headset

1 Answer

Connect jabra to blackberry

1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select BT150 once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".

1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".

please give good rating if the solution works.
Thanks for using FixYa.

May 19, 2008 | Jabra BT150 Wireless Headset

1 Answer

Unable to Detect the Jabra BT125 headset from any Bluetooth Device

If you hold down the button, it will turn the light blue, keep holding it till you can connect it. It will come up as Jabra BT125, hit connect. Then it will ask for a password. The password is 0000. Then it will connect :)

Feb 21, 2008 | Jabra BT125 Headset

2 Answers

How to use Jabra BT5010 with 2 mobile phones

Be careful of the earhook Jabra does not offer a replacement in the BT5010

Dec 07, 2007 | Jabra BT350 Bluetooth Headset Headset

4 Answers

Jabra BT 350 has stopped connecting

Hey everyone! I had the same problem, and I actually got it to work again! I hope these directions will help you get yours to work (from the manual):
1. Put the headset in pairing mode
• Make sure the headset is off.
• Press and hold the answer/end button until a solid blue light comes on. <== THIS IS VERY IMPORTANT! HOLD THE BUTTON UNTIL YOU SEE A SOLID NON-BLINKING LIGHT! (This is where I was going wrong with the directions.)
2. Set your Bluetooth phone to ‘discover’ the Jabra BT350
Follow your phone’s instruction guide. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device.
3. Your phone will find the Jabra BT350
Your phone then asks if you want to pair with it. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros).

Good luck!

Nov 30, 2007 | Jabra BT350 Bluetooth Headset Headset

1 Answer

Connection prob

Brand New Jabra -BT350 won't work on my Nokia 6102i, I did everything in term of setting my phone properly to paired with the Bluetooth, My Phone Bluetooth light is on, and the device blue light is flashing as well, but it still doesn't work. the phone would ring, I hit the JABRA button to answer it.....still can't answer my phone... Please send your help to me at

thank you all.

Nov 08, 2007 | Jabra BT350 Bluetooth Headset Headset

6 Answers

Connecting phone to bluetooth

had the same problem but this site reminded me to hold the phone button down 7-8 seconds. I was simply not waiting long enough - took more like 12 seconds.

Apr 05, 2007 | Jabra BT250 Consumer Headset

Not finding what you are looking for?
Jabra BT150 Wireless Headset Logo

1,818 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jabra Headsets Experts


Level 3 Expert

328 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Richard Schabler

Level 2 Expert

108 Answers

Are you a Jabra Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides