Question about Brother MFC 240C All-In-One InkJet Printer

1 Answer

Helpl!!!!!! I was emailed an answer by a tech but when I clicked to review it appeared for a couple of minutes then it was gone. To recap I am having this issue: After paper jam I cleared the printer and even unplugged it for 1 min to reset (as i have had to do in the past) and it reads : S"print unable 50" Can someone Please help me with this???? email: I don't use the fax feature, just the scanner and printer, so does not make a difference on how to fix the problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 832 Answers
Re: Helpl!!!!!! - Brother MFC 240C All-In-One InkJet Printer Printers & Copiers


Posted on Oct 02, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Dfx 9000 error 07" Questions what is the possible solution

The service manual says it is a voltage related problem within the unit. After time parts wear an over heat. You either have a voltage supply board that has problems or the ROM board has a bad componet on it. Many times they can be repaired with a recap job. Sometimes its better to replace the board. If you are not a tech person take it in for repair or get another printer.

Jan 28, 2015 | Epson DFX Printers & Copiers

1 Answer

I have a HP C6100 All in One error Oxc18a0206 ink failure

Remove all supplies, switch off the machine remove power & usb cable wait couple of minutes.. Power on the machine install the supplies as per appears on screen, check for the error.. For tech guys:
Remove CMOS battery from the formatter, wait for 15 mts, with out battery check for the error. Once error disappears, add CMOS battery...

Jan 04, 2012 | HP PhotoSmart Printers & Copiers

1 Answer

What is your fee?

Please review the 'terms' of use page for full explanation of fees associated with this site.

Thumb nail ... You can have a Expert call you for about $30.00 ... you can chat on line for about $20.00, you can ask a question in the paid section for another amount, you can subscribe on a monthly basis and ask lots of questions for another price ... or you can ask free questions such as you have here, for no fee.

This site is powered by volunteer question answering people (just like me) working when they want from our homes offices and shops ... taking the questions we want to answer. If you pay for the service, your question will be directed to a Expert who is currently on line and your question will remain at the top of the listing until it is answered. In the free section, your question may or may not be caught before it falls below the first couple of pages. Some people go looking for specific types of questions, as a rule, I don't.

When you ask your question please be brief but specific. Please post your question under an appropriate section. State what if anything you have done to correct the problem. Good questions get good answers at

Feel free to peruse my profile - click on my (or any other Expert) name to get a lot of details on questions I have answered in the past.

Thank you for using today.

May 02, 2011 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

I changed my trans roller on a magicolor 5440DL printer but the message 'trans. Roller low' is still appearing on the screen have i installed it incorrectly?

You can reset the transfer roller counter under the menu for the printer. To do this:

1. Press menu.
2. Push the right arrow twice to get to "Engine"
3. Verify Engine is the option displayed and press select/enter.
4. Scroll through the menu until you see "Engine Service". Press select.
5. Scroll to "Reset Counter Transfer Roller". Press select.

After pressing Select on step 5 it appears to run a calibration (at least it did on mine.) But the message should be gone after that. The counter for the transfer belt is also here. Please be sure not to reset the wrong one.

I hope I've done a good job answering your question. If you have any additional questions I will do my best to answer them. If my answer was helpful for you I'd appreciate a 5 thumbs up rating, or a click on the yes this was helpful button. Thank you!

May 21, 2010 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

Need the downloadable manual to print

Note: This is a LARGE PDF File and may take a couple of minutes to load once you click on it. If you need a PDF viewer you can download Adobe Reader for free.
Click here:

Adobe Reader:

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks!

Feb 03, 2010 | HP LaserJet 5500dtn Color Printer

2 Answers

How do i scan a document to email?

Install the cd of HP installation of your printer. If you have installed the software thenQ 1. press the first button on the left of your printer SCAN. The scanner will start and a message will arrear. Do you want to scan another picture? 2. You Press the button DONE on your screen it means NO. 3. HP Immage Zone program appears. 4. you must be able now to see your scanned picture. 5 On your lest bottom of the screen you will see TRANSFER IMAGES and the sign >> downway, press and will appear 3 selections. FROM CAMERA, FROM SCANNER, TO e-mail . 6 press TO e-mail and this is the answer. Now you can send by e-mail what you have scanned!!

Nov 16, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Sharp MX-2300N trying to send image to email address gives error

The new fire wall was set up with a password, free the password on the server setup, that should eliminate block.

Nov 21, 2008 | Sharp MX-2300N Color Copier

1 Answer

I cannot print an email. I hit the print icon and a box comes up telling me the printer is off line-----but everything is connected! How to fix this??????

Is the printer designated as default printer? If it is not, click on control panel, then double click printers & faxes. This printer should have a check mark by it, and it should say ready. If it does not have the check mark, click on file, then click on make it default. If it does have the little check mark in the circle by it, then go to your printer and make sure it is turned on. If it is turned on, Unplug your power supply from outlet and wait a couple minutes and replug it up, let it initialize, and it should work, if not we have gone beyond my range of expertise. Good luck.

Aug 11, 2008 | Printers & Copiers

1 Answer

Konica Bizhub 250 diagonal stripe (loss of color or tone)

Sounds like it needs service.

The life expectancy meters are just general measurements. They only indicate when it is time for a Service Tech to come by a review the parts. If you are having that type of imaging problems you need a Tech to look at it.

Apr 14, 2008 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

Screen in copy mode

Not to sound patronising but review the user manual to ensure you are doing everything just the way it should be. If this makes no difference to the machine, you could have one of a couple of problems.

First could be the button panel or connecting ribbon has gone faulty.
Second could be that the main board has gone faulty.

The first it fairly cheap and easy to fix, the latter makes the machine uneconomical to fix. Maybe you could just live with it or drive the unit to the recycling center!

Oct 15, 2007 | Epson RX620 All-In-One InkJet Photo...

Not finding what you are looking for?
Brother MFC 240C All-In-One InkJet Printer Logo

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Printers & Copiers Experts

Jim Yeh

Level 1 Expert

15 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

Are you a Brother Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides