Question about Radio Communications

2 Answers

OLDER ICOM RADIO ICBP5 AND A REGENCY U156B

LOOKING FOR GENERAL INFO ON THESE TWO OLDER RADIOS AND TUNING ETC. ANY HELP WOULD BE APPRECIATED. (OLDER ICOM RADIO ICBP5 AND A REGENCY U156B) THANKS LARRY

Posted by on

  • bigred150 Nov 24, 2007

    Looking for the owners manual for these two radios. They both are made by bell south and the model numbers are 2735TM4

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Codes

Posted on Feb 29, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi, The Icom radio models start with IC followed by numbers and then letter(s). The BP5 is the model of the battery pack. Pls post back. I'm not familiar with Regency U156B. However, there is a Regency RU156 which is a 16 channel UHF 25watt mobile radio which could either be crystal controlled or PLL diode matrix. Regency was reported sold to the BK Relm Company, which no longer supports older Regency Radio Equipment. There are a few sites on the Internet where you can get hold of a user's manual (some for a fee) like http://www.bearcat1.com/manuals.htm. Hope this be of some help/idea. Post back how thin gs turned up, the Icom model or should you need additional information. Good luck and kind regards.

Posted on Oct 03, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program a regency uhf/vhf c403 scanner


Is this a Regency ACT-c403? If so, it is not programmable. It uses crystals to receive the frequencies. This type of antique scanner would be fun for us "old guys" to own, but has no real value. It is something I call bragging rights to own older radios, etc. Fun to talk about over coffee.
Here is a list:
http://radiopics.com/Scanners/Scanners/Regency/Scanners.htm

Mar 20, 2018 | Radio Communications

1 Answer

What programming software do i use to program Icom F3022S and F5022


Hi Scott,

To help you get all the info you need, may I suggest: join yahoo group specific to your radio Make/Model, there you will receive info plus free downloads of manuals, schematics and other goodies.

I hope this is good news for you.

Regards,
Peter

Feb 15, 2013 | Icom IC-F3022S

1 Answer

Icom icsp2 schematic


Hi Bob,

Your problem has a solution: join yahoo group SPECIFIC to your radio Make/Model, the expert team will help with advice and info, PLUS YOU CAN DOWNLOAD manuals, schematics and other goodies for your radio.

I hope this is good news for you.

Best regards,
Peter

Jan 10, 2013 | Radio Communications

1 Answer

Ic a110 power problem


Hi Joshua,

Not enough info provided, from you.

IC a 110 power problem means very little.

IC indicates to me that you havs an Icom radio, is that correct?

a110 is confusing me though. What exactly are you trying to say here?

To assist you in finding the answer, I need much more info:

1. The make of the radio i.e,. Icom, Motorola etc,.
2. The Model Number ie, IC-XXX, etc,.

Then I require as much info as possible regarding the problem

By just posting what you have doesn\'t help me help you.

Please reply with the above requirements, and I\'ll find a solution for you.

Cheers,
Peter

Dec 14, 2012 | Radio Communications

1 Answer

ICOM RADIO IC-R8500 display blink freq and no audio signal


G'day,

You have an excellent radio my friend, and that means you require the best possible advice and info.

May I suggest you join yahoo group SPECIFIC to your radio Make/Model, the expert team there will need as much info as you can possibly can give so they can resolve your query, plus you can download manuals, diagrams and other great things for your radio.

I hope I have been of help to you.

Best regards,
Peter

Dec 12, 2012 | Icom IC-R8500 Receiver

2 Answers

How can i do a factory reset on an icom ic-706, basically i want to clean it all off and have it like it came out the factory, it this possible??


Hi Paul,

The best I can come up with is Try this: join yahoo group Specific to your radio Make/Model, the experts there will help you with useful info and you can download manuals, schematics and software, if available, for your radio and all this is free.

I hope I have been of assistance to you.

Regards,
Peter

Nov 29, 2012 | ICOM Informatique Icom IC-F21 16ch UHF...

1 Answer

I am looking for the cheapest way of recieving 66.6 on any scanner..........can you help


Sorry, but that frequency is out of the tuning range of virtually all current scanners. About your only option is to purchase an old continuous-tuning scanner such as the PRO-2006, ICOM IC-R71, etc. eBay is possibly the best source.

Bill B

Apr 29, 2010 | Radio Shack Pro-2096 Base Scanner

3 Answers

Programming an ICOM F4S


Hi....

if you go to the FCC website and look up the FRS/GMRS info you will find a listing to links that can show you the frequiences for the two radio services...or you can look up Midland model GXT900/950 /series radios and in their specifications gives a frequency chart. the link is WWW.midlandradio.com

Mar 17, 2009 | ICOM Informatique BP-196M,...

1 Answer

How to program the emergency rd button on IC-F43TR


First do you have the correct software? Second do you have the correct programming cable? If the first two are OK you are half way there. Open the program and download the radios info to the program, it's that little computer icon. Click on "common settings", you will then see "key & display" click on that. You should have a small window with all the buttons including the red one. I hope this helps.

Feb 06, 2009 | Icom M302 VHF Radio

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

839 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1654 Answers

Brad Brown

Level 3 Expert

17431 Answers

Marvin
Marvin

Level 3 Expert

81285 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...