Question about Televison & Video

1 Answer

Daewoo TV problem

I have a Daewoo tv model dlp-37c3. The lcd light blinks red/green, no matter what I do. When I unplug it and plug it back in, it automatically blinks. When I press buttons on the remote, you can tell it is trying to get the signal (by the red blink) but nothing changes. I have tested all my connections. The manual indicates this is "standby mode", but I cannot clear it. Also, this happened all the sudden, while I was watching tv.

Posted by on

  • NWallace Oct 04, 2007

    I did not mean to accept Likha's solution. please reply again. I still do not understand the problem.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 790 Answers

That is standby mode! maybe you have defective power supply in oscillation circuit! at hot side..

Posted on Oct 03, 2007

  • carlos fernandez Jr.
    carlos fernandez Jr. Oct 05, 2007

    ok sir you have defective horizontal oscillation! or abnormal power supply in hotside section! please check the hotside if in correct voltage.. then check the supply of jungle IC maybe that is high voltage!



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Green led indicator light is off on my 62" toshiba

when you turn it off your light blinks because your internal fans are still spinning allowing the inside of the chassis to cool off, hence the reason you dont watch a DLP TV and then unplug it. DLP's are JUNK

Dec 01, 2010 | Toshiba 62HMX84 62" Rear Projection HDTV

3 Answers

I have a mitsubishi tv model # WD 52525 DLP and the timer light just keeps flashing and the TV will not go on

i have a mitsubishi ws-55859 rear projection tv. the green timer light just keeps flashing and the tv will not turn on.

Aug 09, 2009 | Televison & Video

3 Answers

TV picture and sound goes off--leaving a blinking green light showing as on (power). Several times in the last week I have shut the power strip off and then on again and the TV went back on with the solid...

If TV goes off and the led stays blinking, that is because the TV is going on protection.
Protection is a special diagnostic mode that starts when an internal fault has been detected.
If this happens erratically while you are watching TV, then parts that can commonly cause the problem are PSU board, main board or digital board, ballast board and converge board on DLP, inverter on LCD, low buffer and sustain boards on plasma.

May 14, 2009 | Televison & Video

1 Answer

LG 42 LCD no sound or picture

Did anyone find out the solution for this??????? I have the exact same problem with my LG 32 LCD. I only had it for a year and a half, and the green light blinks a few times and it shows no picture. Not even a red light when the tv is off. The same thing happened a couple weeks ago and by some miracle it started working again.

Jan 28, 2009 | Televison & Video

1 Answer

Blinking Red Lights

Sound like an error code 14 (Audio supply) is beeing blinked...
You probably would want a qualified technician to take a look at it.

Jan 16, 2009 | Philips 37PF7320A 37 in. HD-Ready LCD...

1 Answer

Zenith DLP-Projection tv 42"

Try this solution which I found on Fixya

This solution is for the zenith 56" DLP. Unplug the tv, either from the wall socket or the TV. While the TV is unplugged hold the power button on the TV for 40 seconds. This lets the excessive power drain from the TV. If this does not work call 1-800-243-0000. This is the number for their help line. This is the fix the tech gave me and it worked right away. Hope this helps and have a great day.

Zenith dlp projection model z52sz80 turns off randomly

Further advice here. If the bulb is over a year old it is suspect.

LG DLP TV wont power up Red indicator lightjust blinks when

and where I got all this information frlom

zenith dlp projection tv blinking red light Google Search

Jan 09, 2018 | Zenith Televison & Video

3 Answers

Toshiba dlp 46 inch red light keeps blinking

42 inch Toshiba DLP. Was watching a movie and the screen went dark. The red light started to flash and kept flashing. any ideas 

Jun 26, 2008 | Toshiba 46H84 46" Rear Projection...

2 Answers

Green Blinking Timer Light Mitsubishi WD-62527

hold the menu bottun for 10 seconds
after press power

see if that works

Sep 22, 2007 | Mitsubishi WD62527 62 in. LCD HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75017 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5301 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides