Bosch coffee grinder parts can I buy a new lid?

Sorry we do not have parts here.

Try Craigs list USA.

I bought Mr. coffee grinder it broke , stopped working on the 3rd use... just 2 months. i called to see if any warranty, thank God i got a replacement with a different model. And now on my 4th time using the new one, it stopped working just like the first one. I'm so sad and frustrated, No one grinds coffee all the time but Mr coffee grinder would not work the only time you need it

Purchase the part directly from http://wize.com/coffee-grinders/p39077-bosch-mkm-6003-electric-blades-grinder

Does the spindle spins when you do the grinding? If not the parts in the grinder is broken. If the spindle still spins and you get sort of wood chip grounds, the adjusting wheel has come off the grinder when you adjust the grinder too coarse.You can undo the grinder if you know how to open the machine. Go to my Odea solutions and look up step by step instruction on how to. Itis very similar.All the best.

check grinder maybe is too fine ,go litlle bit courser and try

Cuisinart has the part directly- you can order from their website or over the phone.

The hopper between the burr grinder and where coffee chutes into the filter is jammed with coffee powder...

First, take out the filter holder and carafe, and place a freash empty filter on the pot base to catch stuff.

Next, take out the beans holder and look for the release lever in the lower left section. Sliding it to the left slides open the door, where you'll probably find loads of powder. You can poke your finger through to get the majority, then use the cleaning brush to get it really clean.

Thanks what fixed mine! (I notice I have to do this about once every few months.)

I had the same problem and used a little grease and it worked fine. Take out the bean cup and grease the male and female parts and it should work fine.